Abstract:In this work, Tb70Cu30 alloy is employed as the addition for enhancing the hard magnetic properties of hotdeformed Nd-Fe-B magnets through in-situ diffusion. The magnets with and without Tb-Cu addition were prepared by hot pressing at 700 "C followed by hot deformation at different temperatures using melt spun Nd-Fe-B based powder as the raw materials. Tb and Cu elements were found to diffuse into the magnet after preparation. By adding 2 wt% Tb70Cu30, the coercivity and thermal stability of hot-deformed magnet were significantly improved due to the formation of local high-anisotropy (Nd,Tb)(2)Fe14B phase and the reduction in grain size. The intrinsic coercivity H-cj increased from 1281 kA/m to 1681 kA/m and the absolute value of temperature coefficient of coercivity vertical bar beta vertical bar decreased from 0.479%/degrees C to 0.431%/degrees C for the magnets hot-deformed at 750 degrees C. It was confirmed that the diffused Tb atom prefers to substituting Nd in Nd2Fe14B type main phase rather than entering into RE-rich phase, and Cu distributes mainly at the grain boundaries. The reduction in crystal orientation was observed for diffused magnets, which is related to the increased rare earth-rich phase, resulting in the decreased remanence. The evolutions of the grain orientation, microstructure and magnetic properties of the magnets prepared at different hot-deformation temperatures were discussed as well.

Effect of High Magnetic Field on Magnetostrictive Property of Tb-Fe Alloy During Heat Treatment

Effect of Magnetic Annealing on Magnetostrictive Performance of a 〈110〉 Oriented Crystal Tb0.3Dy0.7Fe1.95

Effect of magnetic annealing on magnetostrictive performance of a 〈1 1 0〉 oriented crystal Tb0.3Dy0.7Fe1.95

Magnetostriction of a (110) oriented Tb0.3Dy0.7Fe1.95 polycrystals annealed under a noncoaxial magnetic field

The Effect Of Heat-Treatment On Magnetostriction In < 110 > Oriented Crystals Tb0.36dy0.64(Fe0.85co0.15)(2)

Study on the melt-textured technique in a magnetic field for giant magnetostrictive materials R–Fe alloy

Influences of Sputtering Angles and Annealing Temperatures on the Magnetic and Magnetostrictive Performances of TbFe Films

Effect of high magnetic field treatment on the microstructure and mechanical properties of Ti-48Al-2Cr-2Nb alloy prepared by powder-hot isostatic pressing

强磁场热处理对TbFe2和Tb0．27Dy0．73Fe1．95合金晶体取向、微观形貌和磁致伸缩性能的影响

MICROSTRUCTURE AND PROPERTIES OF THE HEAT TREATED DS Tb-Dy-Fe ALLOY

Differential Magnetostrictive Response in Magnetically Annealed Tb0.36Dy0.64(Fe0.85Co0.15)2 with ⟨110⟩ Crystal Orientation

Solidification of R-Fe Alloy in Magnetic Field

Effect of High Magnetic Field on Ferrite Transformation in Fe-0.28%C-3.0%Mo Alloy

Effects Of Rapid Cycle Annealing Temperature On Tbfe Magnetostrictive Films

Enhanced Magnetostriction of a Narrow Hysteresis Tb0.26Dy0.54Ho0.20Fe2 Alloy

Effect of high magnetic field assisted heat treatment on microstructure and properties of AlCoCrCuFeNi high-entropy alloy

Magnetic Properties and Microstructure Evolution of In-Situ Tb-Cu Diffusion Treated Hot-Deformed Nd-Fe-B Magnets

TbFe2/α-Fe Nanocrystalline Exchange Coupling Magnetostrictive Films

Enhanced magnetic properties of Ce17Fe76.5Co1Zr0.5B6 alloys by magnetic field heat treatment

Structure, Magnetostrictive, and Magnetic Properties of Heat-Treated Mn42Fe58 Alloys

The Effect of Magnetic Field Heat Treatment on Magnetic Properties of Fe57Co5Ni20Si4B14 amorphous alloys