实时操作系统μC／OS-II在DSP上的移植

曲延滨,苏健勇,冯立国,王建平

2005-01-01

Abstract:本文介绍了将嵌入式操作系统μC/OS-Ⅱ移植到TMS320LF2407A上的方法,并以此为基础实现了基于DSP的嵌入式系统平台.在此开发平台上实现了A/D转换、通信、I/O管理等任务功能.同时着重讨论了在移植过程中遇到的一些细节问题,如堆栈问题、任务切换问题等.

What problem does this paper attempt to address?

Design and implementation of RTU based on the embedded operation system μC/OS-II

Yanbin Qu,Jianyong Su,Liguo Feng

DOI: https://doi.org/10.1109/DRPT.2004.1338057

2004-01-01

Abstract:This paper describes the design and implementation of RTU based on the embedded operation system μC/OS-II and DSP. In hardware design, the DSP and CPLD technology is adopted to improve systemic integration degree and reliability. In software design, the operating system μC/OS-II is adopted as the software development platform that can supply better portability and expansibility, as a result real-time response and reliability are enhanced further. The methods that how to port the μC/OS-II to DSP and how to implement application programs are discussed in this paper.
Constructing of Software Platform Based on Μc/os-ⅱ

华亮,杨世锡

DOI: https://doi.org/10.3969/j.issn.1000-3428.2004.15.071

2004-01-01

Abstract:This paper introduces a software platform based on μC/OS-Ⅱ. Realization of system modules such as kernel extension, TCP/IP protocol stack, file system is discussed. This platform provides utilities for application based on μ C/OS-Ⅱ and makes the work easier and faster.
The Floppy Driver Control System Based on DSP

戈挺克,颜钢锋

DOI: https://doi.org/10.3969/j.issn.1001-4551.2004.12.011

2004-01-01

Abstract:The DSP(Digital Signal Processor) have got extensive application in the realtime control system because of its rapid instruction processing.This paper proposes a means of controlling the floopy driver based on the TMS320LF2407 of the TI Corp., provides the circuit architecture of the floppy control system, and develops the software with C language . The system completes all kinds of functions of the floppy and the file access function based on the FAT12 file system.
Design and Implementation of Software On-line Update Mechanism Based on TMS320VC55x DSP

SHI Nai-xuan,FENG Wei,WANG Jian,JI Xiao-yong

DOI: https://doi.org/10.3969/j.issn.1002-0802.2010.07.084

2010-01-01

Abstract:A new solution with serial port for on-line update based on DSP is proposed,and the framework and principle of the on-line update system described.The terminal implementation on TMS320VC55x DSP is also discussed in detail.Based on the architecture of TMS320VC55x,secondary boot loader is introduced to boot properly and flexibly.The multi-layer structure for the software design is presented,thus to make the development and debugging more clearly.Meanwhile,the software process of on-line update is given,and this method is successfully applied to data acquisition system based on DSP,and could be popularized to other processor systems.
Porting Μc/os-Ii to TMS320F2812

Gang Chen

2005-01-01

Abstract:The principle of embedded real-time operation system μC/OS-II is introduced,and the characteristic of TMS320F2812 is introduced briefly. The method to solve the problems in implanting μC/OS-II to TMS320F2812 was given.
Design and Implementation of Serial Communication Based on DSP

ZHANG Kun-chan,YANG Jian-hua,DU Xin-hu

DOI: https://doi.org/10.3969/j.issn.1002-2279.2010.06.009

2010-01-01

Microprocessors

Abstract:A TMS320LF2407A-based serial communication system was developed to realize communications between digital signal processor(DSP) and other controllers.This system employed an Universal Asynchronous Receiver Transmitter(UART) module and a Serial Peripheral Interface(SPI) module to connect the DSP to a host PC and a client display peripheral respectively.Detailed principle and method for hardware design were introduced;communication programs and relative software structure were given.Communication experiments showed that the system was simple in circuit design and stable and accurate in data transmission.It has reference value and practical benefit to exploit communications of DSP system.
Design and Implementation of Rtu Based on the Embedded Operation System Mu C/Os-Ii

YB Qu,JY Su,LG Feng

DOI: https://doi.org/10.1109/drpt.2004.1338057

2004-01-01

Abstract:This paper describes the design and implementation of RTU based on the embedded operation system mu C/OS-II and DSP. In hardware design, the DSP and CPLD technology is adopted to improve systemic integration degree and reliability. In software design, the operating system mu C/OS-II is adopted as the software development platform that can supply better portability and expansibility, as a result real-time response and reliability are enhanced further. The methods that how to port the mu C/OS-II to DSP and how to implement application programs are discussed in this paper.
Research on the Programming of Transplanting the Entire DSP Program from On-Chip FLASH to RAM

Dong Sheng Shan,Yang Wang,Xiao Bo Qiu,Chun Lin Fan,Chao Li,Pei Qiang Zhang,Dong Lai Chu

DOI: https://doi.org/10.4028/www.scientific.net/amm.571-572.519

2014-01-01

Applied Mechanics and Materials

Abstract:When TMS320F28XXX DSP programs run from the on-chip flash, it’s about 30% slower than that from the on-chip RAM, which caused the poor performance when programs run directly from on-chip flash, so program code need to be transplanted to RAM in order to improve the running speed. This paper analyzes the running processes of TMS320F28335 DSP application and the code removal processes from on-chip FLASH to RAM, and then introduces the transplantation programming method. This method is verified feasible through the experiment designed in the project of gun control system based on DSP TMS320F28335, and it can be extended to practical engineering and industrial applications.
In-application Programming Technology of On-chip Flash in TMS320F28x DSP

LUO Xin,LIU Zhen

DOI: https://doi.org/10.3969/j.issn.1002-1841.2005.07.017

2005-01-01

Abstract:Based on the characters of on-chip flash in TMS320F28x DSP, an in-application programmable system was designed for this kind of Flash. In the system, master computer sends programming instructions and data through CAN bus and then DSP programming its on-chip Flash by itself.The hardware components were presented and the method and flow about the software were introduced. Especially some difficulties, such as shifting within different memories, modifying the start address of code in flash, creating the code to be loaded in flash and etc, were analyzed in detail and afterwards the resolution of them were given. This in-application programming method made maintenance and updating for software of DSP more convenient and it is of great value for widely application.
Application of Μc/os II in RealTime Monitoring System

Wei Lu,Fu Min Bao

2006-01-01

Abstract:Introducing realtime operating system into embedded system will improve the reliability and efficiency of the embedded application.This article focuses on the problems in the process of applying μC/OS Ⅱ, a fully preemptive,multitasking,portable and scalable realtime kernel,to Monitoring System.The detailed realization is proposed combined with Micrcehip PIC18F452 MEU.The result of application in project indicates the system has an outstanding effect in practical application.
An Audio Acquisition and Release System Based on DSP

XIAO Qi-yang,FANG Yuan

DOI: https://doi.org/10.3969/j.issn.1006-2475.2012.06.040

2012-01-01

Abstract:An audio signal processing system based on DSP is introduced.The system adopts TI's low power consumption DSP TMS320VC5509A as the main processor,and TLV320AIC23 as the audio codec chip.Therefore,the system's hardware platform and software design are completed based on them,which can be used as a universal platform for other audio signal processing.The paper expounds in detail the method of interface that connects codec chip with DSP.At last,it provides an example of data transmission based on DMA interruption,which upgrades procession speed largely.
Design of Virtual Device System Based on DSP

刁红泉,张瑶瑶,颜钢锋

DOI: https://doi.org/10.3969/j.issn.1671-7147.2004.01.010

2004-01-01

Abstract:With the development of the computer technology and digital signal processing technology, virtual technology has become popular. Application of virtual technology in control domain is called virtual device. To verify the effect of the controller, on the basis of system model, the virtual device with approximate input-output characteristics is employed for the system's real-time simulation, achieving the aim of reducing on-spot debugging, enhancing controller's security and improving effect. This paper presents hardware and software designs of a virtual device using DSP chip-TMS320F240, TI Com. and verifies the simulation effect of virtual device through application example.
The Achievement of IEC870-5-102 Protocol in μC/OS-Ⅱ Based on TMS320F2812

刘克林,陈刚

DOI: https://doi.org/10.3969/j.issn.1672-9560.2007.07.011

2007-01-01

Abstract:The principle of embedded real time operation system μC/OS-Ⅱ is introduced, and the method of porting μC/OS-Ⅱ to TMS320F2812 is depicted.how to achieve IEC802 protocol in μC/OS-Ⅱ through an application is explained.
OS-Level IPC Implementation in Complementary Multi-processor Systems

Ke Pei,Gang Zhang,Chang Qing

DOI: https://doi.org/10.1109/APWCS.2010.26

2010-01-01

Abstract:Most of embedded multiprocessor platforms are ideal for running diverse operating systems and implementing different applications. Inter-processor communication interface makes it possible for an embedded multi-processor system to easily support multiple subsystems parallel processing. This paper propose a kind of OS-level communication interface implementing method based-on HPI in the Complementary Multi-processor System and present the primary principles and corresponding DSP side code structure for HPI. Take a single-board embedded multimedia system which was integrated three embedded microprocessors (PXA255, TMS320DM642 and SM501) as hardware platform, detailed description of how implement tasks communication and data transform by HPI between different embedded OS(ARM-Linux and μC/OS-II) running on ARM and DSP separately.
Design of infrared guidance control information data processing system based on dual DSP chips

ZHANG Wan-zhen,SUN Ai-zhong,GUO Xing-ping,LIU Bing,XIE Tao,LUAN Qian-jin

DOI: https://doi.org/10.3969/j.issn.1004-373X.2013.07.010

2013-01-01

Abstract:A design scheme of information data processing system based on master-slave type dual DSP chips(TMS320C6202B and ADSP-2187NBST-320)is put forward by function analysis of the infrared guidance control information da ta processing system.The design and implementation methods are introduced in three aspects(working principle,hardware and software).The mission management,dispatch and calculation of entire data processing system are executed by master DSP.The analog magnitude acquisition and output,and discrete magnitude acquisition and output of I/O module are dealt by slave DSP.This design scheme has high generality and scalabitity,and can simplify the design procedure of system.
Application of the Dsp Technology in Feeder Terminal Unit (Ftu)

YP Meng,SL Ha,ZQ Shi

DOI: https://doi.org/10.1109/tdc.2002.1177785

2002-01-01

Abstract:In this paper, a type of feeder terminal unit that adopts 16 bit fixed-point DSP TMS320F206 as its core is developed. The DSP has good features of low price and high data processing capacity that is 20 MIPS (Million Instructions Per Second), which are fully used by the FTU to improve its performance. Some algorithms are adopted in software to realize AC synchronized sampling which greatly simplify the hardware design and enhance the measuring accuracy. This type FTU puts together such functions as protection, control, measure, communication, display, etc. Further more, it supports multiprotocols and can constitute a fully integrated distribution system with various on-pole switches. Compared with other FTU constituted with general microprocessors, this feeder terminal unit based on DSP technology possesses features of lower power consumption, higher real-time processing speed, higher measuring accuracy, smaller volume and higher stability, and its function can be extended more easily.
Transplantation and Application of Embedded OS Μc/os-Ii in ARM

赵宁,陈明,何鹏举

DOI: https://doi.org/10.3969/j.issn.1674-5795.2004.04.011

2004-01-01

Abstract:The main process of transplanting the open-source embedded operating system μC/OS-II to ARM processor is described. An example of embedded internet multi-tasks run system is given. It shows many advantages such as low cost, portability and expansibility, and it can be widely used.
Technology on PC Serial Communication with DSP

王六顺,陈小平,于盛林

DOI: https://doi.org/10.3969/j.issn.1671-4598.2001.04.021

2001-01-01

Abstract:Serial communication is a simple method used w idely. Because of DSP characteristic itself, DSP communication with PC is differ ent from common Single Chip Micyoco (SCM). According to the experience of PC ser ial communication with TMS320F206, a method of PC serial communication with DSP is introduced in this paper.
DEVELOPMENT OF DIGITAL SIGNAL PROCESSOR BASED MEASURING AND CONTROLLING UNIT FOR INTELLIGENT BREAKER

吴晓峰,张浩

DOI: https://doi.org/10.3321/j.issn:1000-3673.2003.07.018

2003-01-01

Abstract:The design of measuring and controlling unit for intelligent breaker using TMS320LF2407 Digital Signal Processor (DSP) is presented in which the measuring, protection, control, communication and display are integrated, therefore, the microprocessor-based automation of breaker is implemented. This unit also possesses the operation charac-teristics of three-sect current protection and grounding current leakage protection through monitoring the signals of currents and voltages. The modular design is applied to the software and hardware of the unit. As the kernel of measuring and controlling unit, in digital signal processing system the DSP is used and its functional modules, such as signal processing, CPLD, clock and communication interface, are described. In software design the new digital filtering algorithm and the protection algorithm are adopted, the real-time multitasking operation system is applied to the overall architecture and the interrupt flag bits are circularly retrieved in main program. The whole program is divided into two parts, i.e., the main program and the interruption subroutine. The flow chart of main program and partial interruption subroutines are given. The prototype of the unit is put into operation and the desired results are achieved.
Programming of Drivers for DSP Extension Bus Interface in Embedded Linux

盛健,王锋,季晓勇

DOI: https://doi.org/10.3969/j.issn.2095-347x.2004.01.021

2004-01-01

Abstract:This paper discusses the programming of drivers for DSP extension bus interface on embedded Linux platform, and implements the communication between MCF5272 MCU and TMS320C6202 DSP. The cooperation to each other makes both powerful enough to meet those occasions that requires high speed computations, controls and communications.

实时操作系统μC／OS-II在DSP上的移植

Design and implementation of RTU based on the embedded operation system μC/OS-II

Constructing of Software Platform Based on Μc/os-ⅱ

The Floppy Driver Control System Based on DSP

Design and Implementation of Software On-line Update Mechanism Based on TMS320VC55x DSP

Porting Μc/os-Ii to TMS320F2812

Design and Implementation of Serial Communication Based on DSP

Design and Implementation of Rtu Based on the Embedded Operation System Mu C/Os-Ii

Research on the Programming of Transplanting the Entire DSP Program from On-Chip FLASH to RAM

In-application Programming Technology of On-chip Flash in TMS320F28x DSP

Application of Μc/os II in RealTime Monitoring System

An Audio Acquisition and Release System Based on DSP

Design of Virtual Device System Based on DSP

The Achievement of IEC870-5-102 Protocol in μC/OS-Ⅱ Based on TMS320F2812

OS-Level IPC Implementation in Complementary Multi-processor Systems

Design of infrared guidance control information data processing system based on dual DSP chips

Application of the Dsp Technology in Feeder Terminal Unit (Ftu)

Transplantation and Application of Embedded OS Μc/os-Ii in ARM

Technology on PC Serial Communication with DSP

DEVELOPMENT OF DIGITAL SIGNAL PROCESSOR BASED MEASURING AND CONTROLLING UNIT FOR INTELLIGENT BREAKER

Programming of Drivers for DSP Extension Bus Interface in Embedded Linux