Abstract:Background: Robotics is emerging as a promising tool for functional training of human movement. Much of the research in this area over the last decade has focused on upper extremity orthotic devices. Some recent commercial designs proposed for the lower extremity are powered and expensive - hence, these could have limited affordability by most clinics. In this paper, we present a novel un-motorized bilateral exoskeleton that can be used to assist in treadmill training of motor-impaired patients, such as with motor-incomplete spinal cord injury. The exoskeleton is designed such that the human leg will have a desirable swing motion, once it is strapped to the exoskeleton. Since this exoskeleton is un-motorized, it can potentially be produced cheaply and could reduce the physical demand on therapists during treadmill training. Results: A swing-assist bilateral exoskeleton was designed and fabricated at the University of Delaware having the following salient features: (i) The design uses torsional springs at the hip and the knee joints to assist the swing motion. The springs get charged by the treadmill during stance phase of the leg and provide propulsion forces to the leg during swing. (ii) The design of the exoskeleton uses simple dynamic models of sagittal plane walking, which are used to optimize the parameters of the springs so that the foot can clear the ground and have a desirable forward motion during walking. The bilateral exoskeleton was tested on a healthy subject during treadmill walking for a range of walking speeds between 1.0 mph and 4.0 mph. Joint encoders and interface force-torque sensors mounted on the exoskeleton were used to evaluate the effectiveness of the exoskeleton in terms of the hip and knee joint torques applied by the human during treadmill walking. Conclusion: We compared two different cases. In case 1, we estimated the torque applied by the human joints when walking with the device using the joint kinematic data and interface force-torque sensors. In case 2, we calculated the required torque to perform a similar gait only using the kinematic data collected from joint motion sensors. On analysis, we found that at 2.0 mph, the device was effective in reducing the maximum hip torque requirement and the knee joint torque during the beginning of the swing. These behaviors were retained as the treadmill speed was changed between 1-4 mph. These results were remarkable considering the simplicity of the dynamic model, model uncertainty, non-ideal spring behavior, and friction in the joints. We believe that the results can be further improved in the future. Nevertheless, this promises to provide a useful and effective methodology for design of un-motorized exoskeletons to assist and train swing of motor-impaired patients.

Contralateral Movement Constraint Based Gait Intervention Using a Powered Hip Exoskeleton

Adaptive CPG-Based Impedance Control for Assistive Lower Limb Exoskeleton

Design and Gait Realization of Power-assisted Lower Limbs Exoskeleton

Real Time Gait Planning for a Mobile Medical Exoskeleton with Crutche.

Imposing Healthy Hip Motion Pattern and Range by Exoskeleton Control for Individualized Assistance

Four-legged gait planning method for a mobile medical exoskeleton with a pair of crutches

Hip Exoskeleton Based Indirect Intervention Strategy Towards Gait Training After Total Knee Arthroplasty

Gait Adaptation to Asymmetric Hip Stiffness Applied by a Robotic Exoskeleton

Design and Experimental Verification of a Parallel Hip Exoskeleton System for Full-Gait-Cycle Rehabilitation

Effects of Different Resistance Schemes Applied by Hip Exoskeleton on Lower-Limb Muscle Recruitment and Coordination

Mechatronic Design and Control of a Rigid-Soft Hybrid Knee Exoskeleton for Gait Intervention

Synergetic gait prediction and compliant control of SEA-driven knee exoskeleton for gait rehabilitation

A Multistage Hemiplegic Lower-Limb Rehabilitation Robot: Design and Gait Trajectory Planning

Admittance Control Based Gait Intervention Strategy of Knee Exoskeleton for Stance Phase Support

5-Link model based gait trajectory adaption control strategies of the gait rehabilitation exoskeleton for post-stroke patients

Human-in-the-Loop Control Strategy of Unilateral Exoskeleton Robots for Gait Rehabilitation

Development and control of a robotic lower limb exoskeleton for paraplegic patients

A Real-Time Stability Control Method Through sEMG Interface for Lower Extremity Rehabilitation Exoskeletons

Lower Limb Exoskeleton Using Recumbent Cycling Modality for Post-stroke Rehabilitation

Preliminary Evaluation Of Gait Assistance During Treadmill Walking With A Light-Weight Bionic Knee Exoskeleton

Novel swing-assist un-motorized exoskeletons for gait training