Abstract:In the present study, vegetable castor oil was utilized to prepare cost-effective polyurethane for encapsulating solar cells. In addition to its affordability and straightforward preparation, polyurethane encapsulant demonstrated an inherent capability to absorb ultraviolet (UV) radiation (UV-blocking). This polymer's unique quality is valuable for shielding solar cells from damaging UV radiation without requiring extra UV-blocker substances. Additional UV-blockers can cause the encapsulant to turn yellow, diminishing light transmission to the cell and ultimately reducing the photogenerated current in the enclosed solar cell. Through the current work, the inherent UV-blocking capability of the polyurethane encapsulant was confirmed through both optical transmission measurement of the encapsulant and quantum efficiency measurement of the encapsulated solar cells. As the polyurethane thickness increased, optical transmission analyses revealed a successive increase in UV-blocking, while the transparency of the encapsulant material in the visible spectrum remained approximately 92%. The external and internal quantum efficiencies of the silicon solar cell were quenched within the wavelength range of 300–400 nm after encapsulation with different polyurethane compositions. However, an increase in polyurethane thickness resulted in a successive decrease in quantum efficiencies, exhibiting a behavior agreed with that observed in UV-blocking through polyurethane's optical transmission. The quantum efficiencies measurements revealed that the applied temperature up to 150 °C did not change the UV-blocking capability of the polyurethane encapsulant. Through the current work, it can be affirmed that the affordable and readily available polyurethane is suitable for encapsulating solar cells in various conditions, including high temperatures (reaching up to 150 °C), low solar intensity (owing to its impressive transmission of up to 92%), and excessive UV radiation (thanks to its UV-blocking capability). Furthermore, the existing polyurethane encapsulant can be formulated and poured into solar cells with varying compositions. These compositions can span from a flexible form, which proves beneficial for flexible solar cell applications, to a rigid form that exhibits a glass-like structure. This encapsulation material eliminates the need for a glass cover sheet to protect the solar cells, eliminates the need for extra UV-blocker materials, and shields the solar cell against harmful UV radiation.

Cationic Polymerization Ultraviolet Curing Method for Preparing Epoxy Resin Encapsulation of Solar Cell: Used for Portable Photovoltaic Devices

Vinyl-Functionalized Polyolefins for Fast Photovoltaic Cell Encapsulation

Castor oil-based polyurethane for affordable solar cell encapsulation

Recent Advances in UV-Cured Encapsulation for Stable and Durable Perovskite Solar Cell Devices

Mechanically Robust and Self-Cleaning Antireflective Coatings for Photovoltaic Modules

Highly Flexible All‐Polymer Solar Cells Processed Without Post‐Treatment Achieving 13.56% Efficiency

Epoxy resin composite for high-power LED (light-emitting diode) encapsulation and preparation method thereof

Preparation and characterization of transferable encapsulated dye-sensitized solar cells

Inherent UV-blocking capability of polyurethane prepared from vegetable oil for solar cell encapsulation

Encapsulation of PV Modules Using Ethylene Vinyl Acetate Copolymer as the Encapsulant

Progress of the Encapsulants for Photovoltaic Modules

An Effective Encapsulation for Perovskite Solar Cells Based on Its Building Integration Photovoltaics

Room temperature nondestructive encapsulation via self-crosslinked fluorosilicone polymer enables damp heat-stable sustainable perovskite solar cells

Novel EPE co-extruded encapsulating films with UV down-conversion power gain effect for highly efficient solar cells

UV-induced frontal polymerization for optimized in-situ curing of epoxy resin for excellent tensile and flexural properties

Solution Processed PVB/Mica Flake Coatings for the Encapsulation of Organic Solar Cells

Electrostatically‐sprayed Flexible Encapsulation for High‐performance III‐V Solar Cells

Recent developments of polymer-based encapsulants and backsheets for stable and high-performance silicon photovoltaic modules: materials nanoarchitectonics and mechanisms

Photoinduced Cross Linkable Polymerization of Flexible Perovskite Solar Cells and Modules by Incorporating Benzyl Acrylate

UV Encapsulated Monolithic Perovskite/Silicon Tandem Solar Cells for Hundred-Watt Power System

Synthesis of Epoxy-Modified Methyl Phenyl Silicone Resins for LED Encapsulation