Abstract:Multiple degrees-of-freedom (multi-DOF) hydraulic manipulators are usually recognized as hard-to-control systems to achieve dynamic trajectory tracking because of strong nonlinearities, uncertainties, and complex couplings within the dynamics. In practice, when the end-effector of the multi-DOF hydraulic manipulator is tracking a given trajectory continuously, some joints may experience frequent stop-and-go or low-speed motions due to its kinematics. In such situations, dynamic friction becomes one of the main factors that affect the control performance. Inadequate compensation for the dynamic friction can result in undesired crawling or oscillatory behaviors of the manipulator. However, it is challenging to make effective compensation of the dynamic friction in control design due to its complicated and nonlinear properties. In this article, motion control of a multi-DOF hydraulic manipulator with extra consideration on the nonlinear friction for dynamic trajectory tracking is proposed. First, to make a more precise compensation of the nonlinear friction force, an improved LuGre model ensuring continuity and differentiability is developed, along with the method for obtaining nominal values of internal friction state based on desired trajectories. Then, a model-based adaptive robust motion controller is developed for the multi-DOF hydraulic manipulator. The nonlinearities and uncertainties of the high-order dynamics are well addressed in the closed-loop system, and the transient and asymptotic tracking performance can be guaranteed in theory. Finally, experimental validation was conducted, and the comparison with existing methods showed the improved tracking performance.

METHOD TO IMPROVE DYNAMIC TRACKING ABILITY OF SPOT WELDING MANIPULATOR WITH HEAVY PAYLOAD

Adaptive Real-Time Predictive Compensation Control For 6-Dof Serial Arc Welding Manipulator

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

Graded Error Compensation Method for Heavy-Load Manipulators Based on Laser Tracking Measurement

Dynamic Modeling and Trajectory Tracking Control of a Novel Muck-Removal Hydraulic Manipulator

Torque Limitation Control of Industrial Manipulators Based on General Weighted Least Norm Method

Motion Control of a Hydraulic Manipulator with Adaptive Nonlinear Model Compensation and Comparative Experiments

Advanced Motion Control of Hydraulic Manipulator with Precise Compensation of Dynamic Friction

Adaptive PID Saturate Output Feedback Control of Robot Manipulators

A Control Strategy of a Two Degrees-of-Freedom Heavy Duty Parallel Manipulator

Fast and Accurate Tracking Control of Robotic Manipulators Subject to State Constraints and Input Saturation by Effectively Integrating Planning Strategies

Decoupled Dynamic Model and Control of Flexible Space Manipulator

Design of Multi-Axis Motion Controller and Its Application on Manipulators

Design and Tracking Control of an Electro-Hydrostatic Actuator for a Disc Cutter Replacement Manipulator

A model-based PID-like motion control method for flexible-joint manipulator with harmonic drives

Dynamic Feedforward Control of Spatial Cable-Driven Hyper-Redundant Manipulators for On-Orbit Servicing

The Adaptive Robust Tracking Control of Deep-Sea Hydraulic Manipulator Based on Backstepping Design

Robust nonlinear controller design for improving the working rate of forging manipulators

Trajectory Tracking Control of Mobile Manipulator Based on Improved Sliding Mode Control Algorithm

Kinematic calibration and feedforward control of a heavy-load manipulator using parameters optimization by an ant colony algorithm

Method for control optimization based on fuzzy neural network and dynamic programming