Abstract:MgB2 has a large coherence length, and it is relatively easy to prepare Josephson junction-based electronic devices with simple processes and good repeatability. Therefore, it is more advantageous to use MgB2 thin films to prepare Josephson junctions. Based on the above background, the research content of this paper is the electron microscope research of the high critical temperature superconducting material MgB2 Josephson junction. This paper proposes the metal chemical vapor deposition method to prepare MgB2 superconducting thin film. This method uses diborane as the B source, and organic magnesium MgCP2 gas as the magnesium source. In the original traditional chemical vapor deposition system, a gas channel for introducing the organic magnesium source is added, so that the organic magnesium gas is thermally decomposed into Mg atoms and some functional groups. Then it reacts with B to form MgB2 film, which has better superconducting properties. Finally, through experimental simulations, the results prove that when the deposition temperature is higher, the obtained B precursor film tends to change from amorphous B film to crystalline B film. After energy spectrum testing, it is found that the surface of the film has only two components of boron and oxygen, and The ratio of boron atoms to oxygen atoms is about 88.72: 11.28. The MgB2-B-MgB2 Josephson junction was successfully prepared using the crystalline form B film, which proved that the crystalline form B is reasonable and feasible as the dielectric layer of the Josephson junction.

A Comparative Study of the Dendritic Avalanche in MgB2 Thin Films Synthesized by Pulsed Laser Deposition and Hybrid Physical Chemical Vapor Deposition Methods

Comparative study of in situ and ex situ MgB2 films deposited by pulsed laser deposition

Interplay of dendritic avalanches and gradual flux penetration in superconducting MgB2 films

Intrinsic Flux Pinning Mechanisms in Different Thickness MgB2 Films

Local threshold field for dendritic instability in superconducting MgB2 films

Study on In Situ annealing superconducting MgB2 films Prepared by pulsed laser deposition

Pulsed Laser Deposition and Its Application in Magnetic Films

Angular-Dependent Vortex Pinning Properties of YBa 2 Cu 3 O 7− δ /Y 2 O 3 Quasi-Multilayers

Correlation between cation disorder and flux pinning in the YBa2Cu3O7 coated conductor

Thickness Dependence of Critical Current Density in Mgb2 Films Fabricated by Hybrid Physical-Chemical Vapor Deposition

A Study on the Components of MgB2 Thick Film Prepared Via HPCVD

Electron Microscopic Analysis of Josephson Junction of Mgb2 Superconducting Material with High Critical Temperature

Growth mechanism of superconducting MgB2 films prepared by various methods

Effective Pinning Energy in Li-doped MTG-YBa2Cu3Oycrystals

Superconducting MgB2 thin films by pulsed laser deposition

GROWTH AND PROPERTIES OF SUPERCONDUCTING MgB_2 THIN FILM FABRICATED ON Al_2O_3 SUBSTRATE BY HYBRID PHYSICAL CHEMICAL VAPOR DEPOSITION

Effect of PVA doping on flux pinning in Bulk MgB2

Critical Current Density Behaviors Across a Grain Boundary Inclined to Current with Different Angles in YBa 2 Cu 3 O 7-Δ Bicrystal Junctions

Angular-Dependent Vortex Pinning Properties of YBaCuO/YO Quasi-Multilayers

The Al Doping Effect on Epitaxial (In,Mn)As Dilute Magnetic Semiconductors Prepared by Ion Implantation and Pulsed Laser Melting

Rigid Vortices in MgB2