Abstract:YAG:Ce3+ phosphor and CASN:Eu2+ phosphor were synthesized by conventional solid-state reaction, and the phosphor films were prepared from the synthesized YAG:Ce3+ phosphor and CASN:Eu2+ phosphor by a simple spin coating method. The influence on the concentration of the red phosphor and the different packaging structure of the phosphor films on the optical and electrical properties of white LEDs were investigated. The red and green phosphor were coated layer by layer to investigate the spectral absorption effect of phosphors in the films. The phosphor film placing green phosphor adjacent to the chips is named as G–R structure, likewise, the red phosphor close to the chips is labeled as R–G structure. The results show that the emission spectra of the phosphor films with G–R structure exhibit obvious red shift with the increase of the proportions of red phosphor due to the red phosphor have a reabsorption effect on the green light. Then, the phosphor films with G–R and R–G structures were packaged on the LED respectively, and the light efficiency and the correlated color temperature (CCT) of the LEDs gradually decrease with the increase of the proportions of red phosphor. The luminous efficacy of LEDs packaged by G–R structured phosphor film is higher than that of LEDs packaged by R–G structured phosphor film. The luminous efficiency of LEDs packaged by G–R structured phosphor film can reach 128.95 lm/W, the CCT is 4458 K, and the CRI is 65.1. Moreover, the CCT uniformity of LEDs packaged by G–R structured phosphor film is superior to that of LEDs packaged by R–G structured phosphor film. Therefore, the G–R structured phosphor film has potential application values for improving the luminous efficiency and light uniformity of the device.

Dynamic Phosphor Sedimentation Effect on the Optical Performance of White LEDs

Effect of phosphor settling on the optical performance of phosphor-converted white light-emitting diode

Study on Phosphor Sedimentation Effect in White Light-Emitting Diode Packages by Modeling Multi-Layer Phosphors with the Modified Kubelka-Munk Theory

Effects of Phosphor’s Location on LED Packaging Performance

Effects of Phosphor Dispersion on Optical Characteristics of LED Chip Scale Package LEDs

Effects of Packaging Structure on Optical Performances of Phosphor Converted Light Emitting Diodes

Effect of the Substrate Temperature on the Phosphor Sedimentation of Phosphor-Converted LEDs

Phosphor temperature reduction by optimizing the phosphor configuration in white light-emitting diode package

Thermal/luminescence Characterization and Degradation Mechanism Analysis on Phosphor-Converted White LED Chip Scale Packages

A Method to Eliminate the Effect of Phosphor Sedimentation on Led'S Angular Color Uniformity

Effects of phosphor’s thickness and concentration on performance of white LEDs

Effect of Phosphor Composition and Packaging Structure of Flexible Phosphor Films on Performance of White LEDs

Inhibition of phosphor sedimentation for white light-emitting diodes with a facilely realizable and economical method

Studies on Optical Consistency of White LEDs Affected by Phosphor Thickness and Concentration Using Optical Simulation

Thermal, optical and electrical analysis on phosphor-converted white LED Chip Scale Packages with both experiment and simulation

Detailed Study of Optical and Thermal Performance for White Light-Emitting Diodes with Filament-Like Packaging Structures

Opto-Thermal Performances Investigation of Phosphor-in-Glass Based Chip-Scale White LEDs

Near-/Mid-Field Effect of Color Mixing for Single Phosphor-Converted Light-Emitting Diode Package

Influence of Phosphor Particle Size on Visual and Non-Visual Performances of White Light-Emitting Diodes for General Lighting

A Cylindrical Tuber Encapsulant Geometry for Enhancing Optical Performance of Chip-on-Board Packaging Light-Emitting Diodes

Optical Analysis of Phosphor's Location for High-Power Light-Emitting Diodes