Abstract:This paper presents a flexure-based displacement reduction mechanism driven by a voice coil motor to improve the motion resolution and eliminate the hysteresis nonlinearity of the traditional piezo-actuated micropositioning/nanopositioning stages. The mechanism is composed of three groups of compound bridge-type displacement reduction mechanisms, which adopt distributed-compliance rectangular beams to reduce the concentration of stress and improve the dynamic performance of the mechanism. The symmetrical distribution of the structure can eliminate the parasitic displacement of the mechanism and avoid the bending moment and lateral stress applied to the voice coil motor. Firstly, the analytical model of the mechanism is obtained by the stiffness matrix method. The theoretical displacement reduction ratio, input stiffness, and natural frequency of the displacement reduction mechanism are obtained by solving the analytical model. Then, through the static analysis and modal analysis of the mechanism with the Ansys software, the accuracy of the analytical model is verified, and the experimental prototype is also constructed for performance tests. The results show that the maximum stroke of the mechanism is 197.43 μm with motion resolution of 40 nm. The natural frequency is 291 Hz, and the input stiffness is 28.50 N/mm. Finally, the trajectory tracking experiment is carried out to verify the positioning performance of the mechanism. The experimental results show that the designed feedback controller has good stability, and the introduction of the feedforward controller and disturbance observer can greatly reduce the tracking errors.

Design, Pseudostatic Model, and PVDF-Based Motion Sensing of a Piezo-Actuated <italic>XYZ</italic> Flexure Manipulator

Design, pseudo-static model and PVDF-based motion sensing of a piezo-actuated XYZ flexure manipulator

Design and Control of a Piezoelectric Ceramic-actuated and Flexure Hinge-based Micromanipulator

Optimal Design of a Piezo-Actuated 2-DOF Millimeter-Range Monolithic Flexure Mechanism with a Pseudo-Static Model

Design, modeling, analysis and testing of a novel piezo-actuated XY compliant mechanism for large workspace nano-positioning

Dynamics and Distributed Vibration Controls of Flexible Manipulators; Integrated Distributed Sensing and Active Piezoelectric Actuator

A Hybrid Photovoltaic/flexoelectric Actuation Mechanism Applied to Precision Actuation and Vibration Control of Beams

A 3-DOF sandwich piezoelectric manipulator with low hysteresis effect: Design, modeling and experimental evaluation

An Integrated Modeling Method for Piezo-Actuated Compliant Mechanisms

Design and testing of a hybrid polymeric electrostrictive/piezoelectric beam with bang–bang control

A New Hybrid Piezo-Actuated Compliant Mechanism with Self-Tuned Flexure Arm

Redundantly Piezo-Actuated XYθ Z Compliant Mechanism for Nano-Positioning Featuring Simple Kinematics, Bi-Directional Motion and Enlarged Workspace

Vibration Suppression of Piezoelectric Integrated Flexible Manipulators Using H∞ Optimized Disturbance Rejection Control

A Novel Hybrid Actuation Mechanism Based XY Nanopositioning Stage with Totally Decoupled Kinematics

A Kinetostatic and Dynamic Modeling Method of Piezo-Actuated Compliant Mechanisms Based on Dynamic Stiffness Matrix Method

Model and Control of a Compact Long-Travel Accurate-Manipulation Platform

Implementation and displacement self-sensing of a 4-DOF piezoelectric micromanipulator

Design, Modeling, Testing, and Control of a Novel Fully Flexure-Based Displacement Reduction Mechanism Driven by Voice Coil Motor

Design and Kinematic Modeling of A Planar Piezo-Actuated Multistage Compliant Mechanism

Analysis and design of spatial compliant mechanisms using a 3-D dynamic stiffness model

Design and Characterization of a Flexure-Based Hybrid Mechanism for Precise Micro/Nano Positioning

Design, Pseudostatic Model, and PVDF-Based Motion Sensing of a Piezo-Actuated &lt;italic&gt;XYZ&lt;/italic&gt; Flexure Manipulator