Abstract:Experiments of vertical water entry for a cylinder with different inclined angles are performed at a low Froude number to investigate the cavity evolution and hydrodynamics. Unique phenomena of double cavities and separated cavity are observed. The accurate trajectories and attitude angles for the inclined cylinders are proposed, which are extracted by utilizing the method of digital image correlation from the image sequence recorded by a high-speed camera. The raw data of trajectory and attitude angle are fitted using the method of quintic smoothing spline, with which, the velocity and acceleration of the cylinders during water entry are estimated, and the cylinder characteristics of motion and hydrodynamic force are studied. The experimental results demonstrate that the unique cavity phenomena are observed for the inclined cylinder during water entry, such as cavity separation and double cavities. The acceleration increases quickly after the cylinder penetrates into water and achieves the maximum value after cavity separation occurs. After that, the acceleration decreases quickly and tends to zero. The vertical velocity of the cylinder with a large initial inclined angle decreases faster than that with a small inclined angle, while the corresponding horizontal velocity increases rapidly. The trajectories of the cylinder with different initial inclined angles generally present the characteristics of first moving in the upstream direction and then in the downstream direction. With respect to the properties of inclined angle, the angular acceleration responds very quickly to the hydrodynamic force, and it generally first increases and then decreases. In addition, the angular speed of cylinder for a large initial inclined angle increases faster than that for a small inclined angle. The inclined angle shows the same trend as well. The cylinder drag and lift coefficients rapidly increase after the cylinder enters the water, and then slowly increase after the cavity pinches off. Moreover, the force coefficients increase more quickly for the cylinder with a large initial inclined angle.

Numerical Investigation on Entry of an Inclined Cylinder into Water under Uniform Current and Wind

Numerical simulation of water entry of an inclined cylinder

Multiphase Flow Simulation of Water Entry of a Structure with Complex Geometry Using a Three-Dimensional Parallel Compressible Model

Numerical Simulation of Water Entry of Two-Dimensional Structures with Complex Geometry Using a CIP-based Model

Numerical study of vertical water entry of cylinder under the influence of wind and current

Numerical Simulation of Viscous Flow Past an Oscillating Square Cylinder Using A Cip-Based Model

Numerical Investigation of the Water Entry of Inclined Cylinders Using Dynamic Sliding Mesh Method

Numerical Study of the Interaction Between an Internal Solitary Wave and a Submerged Extended Cylinder Using OpenFOAM

A Numerical Study of Water Entry of Asymmetric Wedges Using a CIP-based Model

Numerical investigation on the cavity dynamics and multiphase flow field evolution for water entry of vertical cylindrical shell

Numerical Simulation of Water Entry of Wedges Based on the Cip Method

Experimental Investigation on Motion Hydrodynamics of Water Entry for Inclined Cylinders

Large Eddy Simulation and Experimental Investigation on the Cavity Dynamics and Vortex Evolution for Oblique Water Entry of a Cylinder

Experimental and numerical studies on vertical water entry of a cylinder under the influence of current

Numerical Simulation of Cavity Dynamics and Motion Characteristics for Water Entry of a Hydrophobic Sphere at Various Speeds and Angles

Experimental and Numerical Study on the Oblique Water-Entry Impact of a Cavitating Vehicle with a Disk Cavitator

Numerical study on the fluid dynamics for tandem water entries of two cylinders

Numerical study on vertical water-entry of a cylindrical structure with positive buoyancy and un-closed solid cavity

Investigation on cylinder water entry in regular wave field using large eddy simulation

Experimental investigation on the multiphase flow characteristics of oblique water entry of semi-closed cylinder

Numerical Simulation on the Cavitation Flow of High Speed Oblique Water Entry of Revolution Body