Abstract:For more than a century, rail corrugation has been exposed as one of the most serious problems experienced in railway networks. It also comes with a series of problems for maintenance, such as rolling noises and structural vibrations that can reduce lifetime of both train and track. This periodical phenomenon on rail surface is closely linked to wheel-rail contact dynamic, which depends on friction, train dynamics… To better understand corrugation birth conditions, a numerical model is suggested to complement the experimental limitations and to instrument a wheel-rail contact both locally and dynamically. At first, an appropriate tool was chosen to create the dynamic wheel-rail contact model to reproduce straight-track corrugation, also called “short-pitch” corrugation. The implicit dynamic finite element code Abaqus was chosen to investigate the dynamic local contact conditions. Both the origin and the evolution of straight-track corrugation under transient conditions (acceleration / deceleration) are studied. The parametrical sensibility of corrugation is thus investigated both with single/multiple wheel passing(s) and with geometric defect. A stick-slip phenomenon, linked to both wheel and rail dynamics coupled through the contact, is identified as the root of straight-track corrugation under transient conditions. Secondly, results obtained with the previous model have highlighted a quick decrease of corrugation amplitude with the increase of wheel passings over the rail. This last result seems to be in contradiction with reality. This problem comes from the difficulty to reliably manage contact dynamics, and particularly with local impacts, with the use of classical finite element models such as the one implemented in Abaqus. To compensate for this lack, a mass redistribution method is implemented in Abaqus and used with the previous case. The results show a more realistic corrugation growth according to the number of wheel passings.

Numerical Analysis of Wheel/Rail Wear Based on 3D Dynamic Finite Element Model

Wheel Tread Wear Prediction of High-Speed Railway Train

Wear modelling in wheel–rail contact problems based on energy dissipation

A wheel wear prediction model of non-Hertzian wheel-rail contact considering wheelset yaw: Comparison between simulated and field test results

Numerical calculation of wear in rolling contact based on the Archard equation: Effect of contact parameters and consideration of uncertainties

Predicting railway wheel wear by calibrating existing wear models: Principle and application

A finite element thermomechanical analysis of the development of wheel polygonal wear

Three-dimensional elastic–plastic stress analysis of wheel–rail cyclic rolling contact using finite element method

The mechanism of polygonal wheel wear considering a three-dimensional profile

Influence of material properties on the high-speed wheel-rail rolling contact behaviour

Multiscale analysis of wheel-rail rolling contact wear and damage mechanisms using molecular dynamics and explicit finite elements

Numerical Prediction of Wear in SAG Mills Based on DEM Simulations

Numerical tribology of the wheel-rail contact : Application to corrugation defect

A study on wear evaluation of railway wheels based on multibody dynamics and wear computation

Fatigue crack growth in wheel-rail rolling-sliding contact: A perspective of elastic-plastic fracture mechanics criterion

The effect of 3D wear state of wheel polygon on wheel–rail system dynamics

Simulation of Steady-State Rolling Non-Pneumatic Mechanical Elastic Wheel Using Finite Element Method

Wheel wear prediction for high-speed trains by considering wheel-rail elastic deformation

Finite Element Analysis for Tread Wear of Radial Tire

Research on the prediction method for the three-dimensional wear state of the polygon wheel

Numerical investigation on wheel-rail impact contact solutions excited by rail spalling failure