Separation of Mixtures of 3-Methylpyridine with 4- Methylpyridine

Xiao GuoMin

2004-01-01

Abstract:3-Methylpyridine and 4-methylpyridine are useful products of considerable commercial interest.They are used as intermediates in the preparation of pesticide,pharmaceutical products,dyes and the like.Various processess for separating 3-methylpyridine and 4- methylpyridine are reviewed in this paper.And the developing trend is also discussed.

What problem does this paper attempt to address?

New Synthetic Method of 2-Amino-3-methylpyridine

LI Xiao-juan,DAI Li-yan,WANG Xiao-zhong,CHEN Ying-qi

DOI: https://doi.org/10.3969/j.issn.0367-6358.2006.02.013

2006-01-01

Abstract:2-Amino-3-methyl pyridine was prepared with 2-cyano-methylpyridine as raw material via hydrolysis in dilute basic solution using H_2O_2 as oxidant and Hofmann degradation with NaBrO.The feasible reaction conditions were as follows:hydrolysis,(50°C),5% NaOH,3.5 h,10% of H_2O_2;Hofmann degradation,(60°C),12% NaOH,0.5 h.The overall yield was 74%(mol).The product obtained was identified by GC-MS、IR、()~1H NMR and elemental analysis.
Progress of Preparation of 3-methylpyridine

Jiang Feng,Xiao Guomin,Lv Jianhua

DOI: https://doi.org/10.3969/j.issn.1002-154X.2009.10.015

2009-01-01

Abstract:The application and productive situation of 3-methylpyridine are introduced briefly.Its synthesis methods studied at home and abroad are also reviewed.Thare are 12 sorts of methods in 5 classes,such as acrolein and ammonia method,aldehyde and ammonia method,triallylamine method,2-methylglutaronitrile method and pyridine methylation method.et al.Acrolein method and pyridine methylation method are described in detail.The critical point is the explore of efficient catalysts.
A New Method for the Synthesis of 4-Methoxyl-2,3,5-trimethylpyridine

TC Liu,XY Lu,PD Wu

DOI: https://doi.org/10.3321/j.issn:0253-2786.2002.02.009

2002-01-01

Chinese Journal of Organic Chemistry

Abstract:A new and efficient method for the synthesis of 4-methoxyl-2,3,5-trimethylpyiidine with an overall yield of 76% from cheap and easily available 2,3,5-trimethylpyridine was developed. The structure of related compounds was identified by IR, H-1 NMR and C-13 NMR. The method could be carried out economically on a huge scale.
3‐Methylpyridine: Synthesis and Applications

Zihang Yin,Yanwei Cao,Wen Sun,Gang Chen,Xianjie Fang,Lin He

DOI: https://doi.org/10.1002/asia.202400467

2024-06-25

Chemistry - An Asian Journal

Abstract:3‐Methylpyridine holds a pivotal role in organic chemistry as it constitutes a fundamental structure in numerous biologically active compounds. Its significance is underscored by its involvement in synthesizing vitamin B3 and developing pyridine insecticides, garnering considerable attention. Consequently, chemists have dedicated efforts to devising efficient and environmentally friendly methods for its preparation. This review systematically reviews several synthetic routes to 3‐methylpyridine, alongside recent advancements, while summarizing its application progress in various organic transformations.

chemistry, multidisciplinary
Separation and Purification of 2-Chloro-5-trichloromethylpyridine from Products of Photochemical Chlorination of 3-Methylpyridine Using Preparative Liquid Chromatography

Su Li,Zhang Yong,Huang Keming

DOI: https://doi.org/10.3321/j.issn:1000-8713.2006.06.009

2006-01-01

Chinese Journal of Chromatography

Abstract:A preparative high performance liquid chromatographic technique was used to separate and purify 2-chloro-5-trichloromethylpyridine from the products of photochemical chlorination with 3-methylpyridine as raw material. The elution mode, the flow rate of the mobile phase and injection volume were optimized. The optimum operation parameters were selected as follows: Zorbox-C,18 reversed-phase column with the flow rate gradient elution of 30% acetonitrile in water as the mobile phase (gradient elution program: 0 - 8 min at 4 mL/min, 8 - 14 min at 10 mL/min), and a diode array detector with wavelength set at 240 nm, injecting volume of 100 microL. The average recovery rate was 82.7% and relative standard deviation (RSD) was 4.0% (n = 5). High purity (99.01%) product was obtained. The effective and accurate method has been successfully applied to the preparation of pure 2-chloro-5-trichloromethylpyridine.
Separation of the binary system with 2-mehtylpyridine and water by azeotropic distillation

Ying YANG,Kaigong FAN,Peng BAI,Xianghai GUO

DOI: https://doi.org/10.16085/j.issn.1000-6613.2016-2065

2017-01-01

Abstract:Azeotropic distillation was used to separate 2-methylpyridine and water azeotropic mixture. First,cyclohexane was chosen as the azeotropic entrainer. Second,Aspen Plus were used to simulate the continuous azotropic distillation process. The effects of entrainer flow rate and output quantity at the bottom and feed location on the product purity and heat duty were analyzed to get the optimal operation parameters. The result indicated that when the theoretical stage number was 21,the entrainer flow rate was 3600kg/h,the output quantity at the bottom was 888kg/h,and the feed location was 15, the purity of 2-methylpyridine and water can achieve as 99.54％ and 99.97％,respectively. Finally,in order to investigate the effectiveness of the solvent,the batch azeotropic distillation experiments were carried out. The results showed that the purity of 2-methylpyridine and water can achieve as 99.85％ and 99.96％,respectively,which revealed that cyclohexane was an ideal azeotropic agent and the azeotropic distillation was useful in the separation of 2-methylpyridine and water system.
Application and Technical Development of 3-Methylpyridine Derivates

WANG Qi,YANG Yi,XIAO Guo-min

2005-01-01

Abstract:In this paper, the synthesis routes of several 3-methylpyridine derivates such as 2-chloro-5-chloromethylpyridine , 2 -chloro-5-trifluomethyl pyridine , 2,3-dichloro-5-trifluomethylpyridine were discussed . Their applica-tion as the intermediates of pesticide were discribed . And the development trend of nicotine pesticide was put forward.
Progress on Preparation of 2-Chloro-5-methyl-pyrid Ine

乔萍,闻建平

DOI: https://doi.org/10.3321/j.issn:0253-4320.2001.12.005

2001-01-01

Abstract:chloro 5 methyl pyridine is an important intermediate for producing high efficient,low poisonous,low residual pesticides such as imidacloprid,acetamiprid,etc.The different technical routes of 2 chloro 5 methyl pyridine at home and abroad are considerably described,as well as their advantages and disadvantages.There are seven methods to synthesize 2 chlor methyl pyridine: such as oxidation of 3 methylpyridine,cyclocondensation of benzyl amine,diazotization,melting salt,cyclization,pyridone,one step chlorination of 3 methylpyridine.The problems existing in the synthesis of 2 chloro 5 methyl pyridine and solutions for it are put forward.Prospect of its developing tendency is also forecasted.
Thermodynamic and Quantum Chemical Investigation of MIBK As a Liquid Phase Extraction Solvent for Separating Pyridine Compounds from Water

Erkang Li,Yujie Zhen,Lu Chen,Xuqiang Li,Lei Li,Wenxue Lu,Tao Li,Qingsong Li,Yingmin Yu

DOI: https://doi.org/10.1016/j.molliq.2024.124876

IF: 6

2024-01-01

Journal of Molecular Liquids

Abstract:Pyridine compounds play a crucial role in the synthesis of fine chemicals and pharmaceuticals; however, the generation of a large amount of wastewater may pose a threat to the ecological environment and human health. Considering environmental factors and economic benefits, it is essential to explore efficient methods for separating pyridine compounds from water. In this study, pyridine compounds were separated from water by liquid-liquid extraction using MIBK as solvent. Liquid-liquid equilibrium (LLE) data for the ternary system water + pyridine compounds(pyridine, 2-methylpyridine, 3-methylpyridine, 2,6-dimethylpyridine, and 2,4,6-trimethylpyridine) + MIBK were measured at 303.2 K and 101.3 kPa. Subsequently, the distribution coefficient (D) and separation factor (S) were calculated based on the obtained data, serving as indicators to evaluate the performance of the extractant. The LLE data were then correlated with NRTL and UNIQUAC models to obtain binary interaction parameters. The accuracy of the regressed binary interaction parameters was assessed through Gibbs energy topology analysis. To explore the intrinsic mechanism of extraction between MIBK and pyridine or alkylpyridines, the sigma-profile was used to investigate the interaction form between MIBK and pyridine or alkylpyridines. Based on this, quantum chemical calculations and wave function analysis were used to reveal the molecular-level separation mechanism. The interaction behavior of the MIBK and pyridine or alkylpyridines systems was systematically investigated. The results indicate that van der Waals forces are the main intermolecular interactions, and it is through these strong forces that MIBK can efficiently separate pyridine and alkylpyridines from water.
Separation and Purification of Natural Pyrethrins by Reversed Phase High Performance Liquid Chromatography

Duan Wei,Li Zhengguo,Wang Guomin,Yang Yingwu,Li Yingguo,Xia Yuxian

DOI: https://doi.org/10.1016/s1872-2040(07)60021-8

2006-01-01

Abstract:Pyrethrum is an important insecticidal plant. Natural pyrethrins are a mixture of six active compounds from the pyrethrum. Because of the similarity of their structure, pyrethrins are very difficult to be separated and purified. The conditions of reversed-phase high performance liquid chromatography (HPLC) were optimized, and the six compounds were separated from the pyrethrins oil and purified. The purity of the six compounds was above 99%. The structures of the separated six compounds were confirmed by gas chromatography-mass spectrometry (GC-MS). This study provides an effective method of separating and purifying the six compounds by reversed-phase HPLC from the extract of pyrethrins, which would be a very useful aid in detection of the residue of pyrethrins in foods and would enhance functional research and pure product production of the pyrethrins' six compounds.
New Advances in the Production and Separation Technology of Mesitylene

张卫江,王文喜,曲红梅,孙兴华,王凤东

DOI: https://doi.org/10.3969/j.issn.1004-9533.2002.03.012

2002-01-01

Abstract:Mesitylene is important and applied extensively in preparation of fine chemicals.The developments of the production technology of Mesitylene are reviewed.A new technology—“The combination of isomerization and alkylation used in producing high purity Mesitylene and Durene”is reported.Isomerization can get more mesitylene but the separation becomes difficult because of the accumulation of methylethlbenzene;alkylation can eliminate methylethlbenzene but the yield of Mesitylene is lower than Durene.Therefore,it is good to combine Isomerization and alkylation.In the separating process of products,a novel operation of batch distillation—the conbination of varying pressure and top accumulation is proposed and used efficiently.The separating efficiency is increased,the operating time is shortened and production cost is reduced greatly.This advanced technique has been industrialized successfully with large profits and 600t Mesitylene/y has been produced with a purity of 98.5%.
Separation of picolines by dissociation extraction

Huan ZHAO,Guomin XIAO,Jianhua Lü

DOI: https://doi.org/10.3969/j.issn.1003-7985.2005.01.015

2005-01-01

Abstract:The separation of the by-product (The volume fraction of 3-picoline is 68.4722% and 4-picoline 26.5176%.) in the synthesis of pyridine by dissociation extraction was studied.Six separation conditions of the dissociation extraction-the kind and the dosage of extractant and organic solvent,the concentration of the extractant and separation temperature-were investigated.Different levels of each factor were chosen to form an orthogonal test of six factors and five levels.The results show that the volume ratio of 3-picoline and 4-picoline in organic phase is the highest when 24 mL picolines are separated at 0 ℃ by 2.0 mol/L p-toluenesulfonic and n-heptane whose dosages are 40mL and 48mL,respectively.The effect of the separation is considerably improved with repetition test.This process of dissociation extraction has commendable potential for industrial exploitation.
Synthesis and Application of 2,3-Dimethylpyrazine

姚光源,冯亚青

DOI: https://doi.org/10.3969/j.issn.1004-9533.2003.04.010

2003-01-01

Abstract:In this paper,various syntheses of 2,3-dimethylpyrazine are reviewed,which raw materials includes from biacetyl and ethylene diamine,or from 2,3-butylene-glycol and ethylene diamine etc. Its application in medicine,pesticides, perfume and analytical chemistry also is described.Furthermore, we think the catalytic reaction in gas-solid phase is the superior developing trend and in this reaction,2,3-butylene-glycol should be replaced by cheap biacetyl.
Separation Of 2-Chloropyridine/3-Chloropyridine By Nonporous Adaptive Crystals Of Pillararenes With Different Substituents And Cavity Sizes

Xinru Sheng,Errui Li,Yujuan Zhou,Run Zhao,Weijie Zhu,Feihe Huang

DOI: https://doi.org/10.1021/jacs.0c01274

IF: 15

2020-01-01

Journal of the American Chemical Society

Abstract:Two monochloropyridine isomers, 2-chloropyridine (2-CP) and 3-chloropyridine (3-CP), are in need of a more effective separation method besides rectification. Herein we offer a facile and energy-saving adsorptive separation strategy using nonporous adaptive crystals of perethylated pillar[5]arene (EtP5), perethylated pillar[6]arene (EtP6), perbromoethylated pillar[5]arene (BrP5), and perbromoethylated pillar[6]arene (BrP6), which possess different cavity sizes and substituents and have never been employed in the separation of single-substituted heterocyclic aromatic compounds. BrP6 crystals show a marked preference for 2-CP in the equimolar mixture of 2-CP and 3-CP, affording it with 96.4% purity. Single crystal diffraction experiments demonstrate that BrP6 has stronger host-guest interactions with 2-CP than 3-CP. The cycling experiments demonstrate that BrP6 crystals can be used at least five times without losing their adsorption selectivity or capacity.
Separation of the diastereomers and enantiomers isomers of synthetic pyrethroids

TA Na,LI Xiang,FENG Jian-fang,LIU Ting-feng,SUN Cheng

DOI: https://doi.org/10.3321/j.issn:1000-6923.2006.01.019

2006-01-01

Abstract:Separation of the diastereomers and enantiomers of synthetic pyrethroids was performed by high performance liquid gromatography (HPLC) with different columns in normal phase. The Supelcosil LC-CN column was applied to separate the diastereomers of commonly used pyrethroids such as cypermethrin etc.; the Supelcosil LC-CN precolumn and the Chiralcel OD-H column were chained to separate the enantiomers of pyrethroids such as cypermethrin etc.; the Supelcosil LC-CN column and the Chiralcel OD-H column were chained to separate the enantiomers of pyrethroids such as cypermethrin etc.. All diastereomers and enantiomers were sufficiently separated in a rather short time. The retention time and resolution of the diastereomers and enantiomers of pyrethroids were remarkably affected by the proportion of isopropyl alcohol in mobile phase. The resolution and retention time were increased while the proportion of isopropyl alcohol in mobile phase was decreased. There was no apparent change in the chiral recognization ability but observable change in the retention time when column temperature was increased from 0 to 30°C.
Progress in Separation-Friendly Mitsunobu Reactions

Qi Na,Guo Jian,He Yun

DOI: https://doi.org/10.6023/cjoc201606029

2016-01-01

Chinese Journal of Organic Chemistry

Abstract:The Mitsunobu reaction is famous for its mild conditions, good stereoselectivities and extensive applications. But it is also infamous for difficult purification in organic synthetic chemistry, because of the formation of by-products such as phosphine oxide and hydrazine derivatives. To simplify the separation and improve the efficiency of purification is a hot topic in the research of Mitsunobu reaction. Various emerging strategies for product isolation in Mitsunobu reactions are reviewed. Special stress is laid on the principle, advantages and disadvantages of these strategies.
Extraction and Isolation of Methylquinol and Chimaphilin in Pyrola Rotundifolia

Guo Hui,Wang Changli,Li Hui

DOI: https://doi.org/10.13424/j.cnki.mtcm.2010.05.041

2010-01-01

Abstract:Objective To study the extracting and isolating conditions of methylquinol and chimaphilin in pyrola rotundifolia.Methods Coarse grain was obtained by water decocting,alcohol precipitaion,extraction and column chromatography.The coarse grain was qualitatively invesitgated by FeCl3 reaction,magnesium hydrochloride powder experiment,ultraviolet spectrum and mass spectrometry.It was further isolated and purified by thin layer chromatography and column chromatography.Results Mass spectrometry indicated that two compounds——methylquinol and chimaphilin——were obtained.Conclusion The extracting and isolating conditions of methylquinol and chimaphilin in pyrola rotundifolia were applicalbe,which is the basis for further pharmacological activity experiment.
Separation of the Mixture Pyridine + Methylbenzene Via Several Acidic Ionic Liquids: Phase Equilibrium Measurement and Correlation

Lianzheng Zhang,Dongmei Xu,Jun Gao,Mi Zhang,Zhiming Xia,Yixin Ma,Shixue Zhou

DOI: https://doi.org/10.1016/j.fluid.2017.03.009

IF: 2.745

2017-01-01

Fluid Phase Equilibria

Abstract:For the purpose of selecting the effective solvents to separate basic N-compound pyridine from coal tar, three acidic imidazolium-based ILs, 1-butyl-3-methylimidazolium hydrogen sulfate, [Bmim][HSO4], 1-butyl-3-methylimidazolium dihydrogen phosphate, [Bmim][H2PO4], and 1-butyl-3-methylimidazolium perchlorate, [Bmim][ClO4], were chosen for the extraction process. The liquid-liquid equilibrium tie-line data for the ternary systems of [Bmim][HSO4], [Bmim][H2PO4] and [Bmim][ClO4] + pyridine + methylbenzene were measured at T = 298.15 K under 101.3 kPa. Meanwhile, the interaction energies between the ILs, and pyridine and methylbenzene respectively were calculated. The results indicated that the selected ILs had strong interactions with pyridine than with methylbenzene, which were also verified by the distribution ratio and selectivity calculated from the experimental data. In addition, the experimental LLE data were correlated by the NRTL and UNIQUAC models, and the NRTL model showed good agreement in correlation than the UNIQUAC. The average RMSDs for the NRTL and UNIQUAC models of the investigated systems are 0.0153 and 0.0161, respectively.
A Circular Microreaction Method to the Safe and Efficient Synthesis of 3-Methylpyridine-n-oxide

Funing Sang,Jinpei Huang,Jianhong Xu

DOI: https://doi.org/10.1016/j.cjche.2020.02.002

IF: 3.8

2020-01-01

Chinese Journal of Chemical Engineering

Abstract:3-Methylpyridine-N-oxide is an essential intermediate in the preparation of 2-chloro-5-methylpyridine, which can be used to synthesize nicotine insecticides such as imidacloprid and acetamiprid. The traditional method of production of 3-methylpyridine-N-oxide is catalytic oxidation of 3-methylpyridine in semi-batch reactors. Due to strong exothermic reaction and explosive property of 3-methylpyridine, the reaction efficiency and safety is low using batch technology. Therefore, the development of a safer and efficient 3-methylpyridine-N-oxide pro-duction process is very necessary in industrial production. In this paper, microreaction systems were introduced into the preparation of 3-methylpyridine-N-oxide. The comparison of three different methods (traditional semi-batch method, co-current microreaction method, and circular microreaction method) showed that the circular microreaction method was the most applicable, with relative higher product yield (~90%), less side reaction and better reaction control.
Production.application and Market Analysis of Pyridine

LI Tao

2005-01-01

Abstract:This review introduced the production status of pyridine at home and abroad , and analysed its application and mardet prospect.

Separation of Mixtures of 3-Methylpyridine with 4- Methylpyridine

New Synthetic Method of 2-Amino-3-methylpyridine

Progress of Preparation of 3-methylpyridine

A New Method for the Synthesis of 4-Methoxyl-2,3,5-trimethylpyridine

3‐Methylpyridine: Synthesis and Applications

Separation and Purification of 2-Chloro-5-trichloromethylpyridine from Products of Photochemical Chlorination of 3-Methylpyridine Using Preparative Liquid Chromatography

Separation of the binary system with 2-mehtylpyridine and water by azeotropic distillation

Application and Technical Development of 3-Methylpyridine Derivates

Progress on Preparation of 2-Chloro-5-methyl-pyrid Ine

Thermodynamic and Quantum Chemical Investigation of MIBK As a Liquid Phase Extraction Solvent for Separating Pyridine Compounds from Water

Separation and Purification of Natural Pyrethrins by Reversed Phase High Performance Liquid Chromatography

New Advances in the Production and Separation Technology of Mesitylene

Separation of picolines by dissociation extraction

Synthesis and Application of 2,3-Dimethylpyrazine

Separation Of 2-Chloropyridine/3-Chloropyridine By Nonporous Adaptive Crystals Of Pillararenes With Different Substituents And Cavity Sizes

Separation of the diastereomers and enantiomers isomers of synthetic pyrethroids

Progress in Separation-Friendly Mitsunobu Reactions

Extraction and Isolation of Methylquinol and Chimaphilin in Pyrola Rotundifolia

Separation of the Mixture Pyridine + Methylbenzene Via Several Acidic Ionic Liquids: Phase Equilibrium Measurement and Correlation

A Circular Microreaction Method to the Safe and Efficient Synthesis of 3-Methylpyridine-n-oxide

Production.application and Market Analysis of Pyridine