Abstract:Geometric complexities and multi-physical phenomena add difficulties for predicting the thermal field and hence thermal management of an electric motor. A numerical design model that combined electromagnetic and thermal-fluid analysis was proposed for disclosing the detailed temperature distributions of each component in an electric motor. The thermal fluid analysis implemented ANSYS-Fluent code to unravel the thermal field of the interior permanent magnet synchronous electric motor fitted with a smooth or novel spirally twisted channel in the cooling water jacket of a stator with and without shaft cooling. In accordance with the thermal powers converted from the various electromagnetic losses of the electric motor, the complex heat conduction model with realistic thermal boundary conditions was formulated. Initially, the turbulent flow structures and channel averaged Nusselt numbers of the spiral channels without and with the sectional twist were comparatively examined for acquiring the convective thermal boundary conditions in the water jacket. With the high thermal conductivity of the aluminum water jacket, the heat-transfer improvements from the smooth-spiral-channel conditions by using the twisted spiral channel were effective for reducing the average temperatures by about 10% but less effective for altering the characteristic thermal field in the water jacket. At 1290 < Dn < 6455 or 5000 < Re < 25,000 for the spiral channel flows, the channel average Nusselt numbers ratios between the smooth and twisted spiral channels were elevated to 1.18–1.09 but decreased with the increase of Dn or Re. A set of heat-transfer correlations for estimating the Nusselt numbers of Taylor flow in the rotor-to-stator air gap was newly devised from the data available in the literature. While the cooling effectiveness of the water jacket and shaft was boosted by the sectional twists along the spiral channel of the water jacket, the presence of Taylor flow in the annual air gap prohibited the effective rotor-to-stator heat transmission, leading to hot spots in the rotor. By way of airflow cooling through the rotating hollow shaft, the high temperatures in the rotor were considerably moderated. As the development of Taylor flow between the rotor and stator was inevitable, the development of active or passive rotor cooling schemes was necessary for extending the power density of an electric motor. Unlike the previous thermal circuit or lumped-parameter thermal model that predicted the overall temperatures of motor components, the present coupled electromagnetic and thermal-fluid model can reveal the detailed temperature distributions in an electric motor to probe the local hot spots of each component in order to avoid overheating at the early design stage.

Temperature Field in a Thrust Magnetic Bearing Rotor System

3D Thermal Analysis of a Permanent Magnet Motor with Cooling Fans

Analysis of Temperature Field Distribution of Magnetic-Fluid Bearing for High-Speed Trains

Static Behavior of a Complex High Temperature Superconductor Thrust Bearings

Electromagnetic and Thermal Coupling Analysis of a Water-Cooled Double-Sided Permanent Magnet Linear Synchronous Motor

On the Influence of the Heating of Thrust Disk on the Static Precision of an AMB Rotor System

Magnetic Field Analysis Using an Analytical Method in a Radial Magnetic Bearing

Analysis of Fluid-Thermal Coupling in Ferrofluid Bearing Used in High Speed Machines

ANSYS Simulation and Performance Analysis Under Eccentricity for Magnetic Fluid Bearings

THE EDDY LOSSES OF A MAGNETIC THRUST BEARING

Numerical and Experimental Investigation on Thermohydrodynamic Performance of Turbocharger Rotor-Bearing System

Thermal Growth Simulations Of The Rotor And Auxiliary Bearing Contact Events

Heat Transfer and Thermal Management of Interior Permanent Magnet Synchronous Electric Motor

Analysis of 3D Transient Temperature Field for Torque Motor in the State of Steady Electromagnetic Field

Magneto-Thermal Coupling Analysis of an Axially Split Phase Spherical Bearingless Flywheel Machine

Temperature Rise Calculation of the High Speed Magnetic Suspension Motor Based on Bidirectional Electromagnetic–Thermal–Fluid Coupling Analysis

Permanent magnet generator 3D transient temperature field analysis based on magnetic-thermal element coupling algorithm

Thermal Analysis and Experimental Validation of a 30 kW 60000 r/min High-Speed Permanent Magnet Motor With Magnetic Bearings

Coupling Analysis of High Power Disc-Type AC Permanent Magnet Synchronous Motor on Temperature Field and Flow Field

A method of heating a spinning metal sphere in an elliptical rotating magnetic field with null-torque

Dynamic Analysis of Turbocharger Rotor Bearing with an Integrated Three Dimensional Thermohydrodynamic Model