Abstract:The metallic interconnects are essential components of energy devices such as fuel cells and electrolysis cells, batteries, as well as electronics and optoelectronic devices. In recent years, 3D printing processes have offered complementary routes to the conventional photolithography- and vacuum-based processes for interconnect fabrication. Among these methods, the confined electrodeposition (CED) process has enabled a great control over the microstructure of the printed metal, direct printing of high electrical conductivity (close to the bulk values) metals on flexible substrates without a need to sintering, printing alloys with controlled composition, printing functional metals for various applications including magnetic applications, and for in situ scanning electron microscope (SEM) nanomechanical experiments. However, the metal deposition rate (or the overall printing speed) of this process is reasonably slow because of the chemical nature of the process. Here, we propose using the CED process to print a single layer of a metallic trace as the seed layer for the subsequent selected-area electroless plating. By controlling the activation sites through printing by the CED process, we control, where the metal grows by electroless plating, and demonstrate the fabrication of complex thin-film patterns. Our results show that this combined process improves the processing time by more than 2 orders of magnitude compared to the layer-by-layer printing process by CED. Additionally, we obtained Cu and Ni films with an electrical resistivity as low as ∼1.3 and ∼2 times of the bulk Cu and Ni, respectively, without any thermal annealing. Furthermore, our quantitative experiments show that the obtained films exhibit mechanical properties close to the bulk metals with an excellent adhesion to the substrate. We demonstrate potential applications for radio frequency identification (RFID) tags, for complex printed circuit board patterns, and resistive sensors in a Petri dish for potential biological applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01890?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01890</a>.SEM images of the single-layer printed Cu and Ni lines with a nozzle diameter of ∼250 μm for different nozzle speeds; The optical images of single-layer Cu and Ni lines printed with different nozzle speeds, and the width and thickness of the printed Cu and Ni lines vs the nozzle speed; The FIB-sectioned cross-sectional images of Cu and Ni films; and The schematic of an unpinned (top) and pinned (bottom) indentation-induced buckle (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01890/suppl_file/am1c01890_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Metal Scale Replicas Prepared Via Electroless Deposition

Imprinting Of Metal Receptors Into Multilayer Polyelectrolyte Films: Fabrication And Applications In Marine Antifouling

Biomimetic method for metallic nanostructured mesoscopic models fabrication

Metallic Butterfly Wing Scales

Voxelated Meniscus-Confined Electrodeposition of 3D Metallic Microstructures

Recent Development of Electrochemical Deposition of Biologically Functionalized Coatings

Interconnect Fabrication by Electroless Plating on 3D-Printed Electroplated Patterns

New metal-plastic hybrid additive manufacturing strategy: Fabrication of arbitrary metal-patterns on external and even internal surfaces of 3D plastic structures

Metal Painting by Plasma Jet

Characterization and Application of Materials Grown by Electron-Beam-Induced Deposition

Generation of Metal Patterns by Topography-Directed Deposition

Atomic-Scale Imprinting by Sputter Deposition of Amorphous Metallic Films

Mass fabrication technique for polymeric replicas of arrays of insect corneas

With no Color and Scent (part II): Metal and Alloy Microstructures-Handmade Replicas of Natural Objects

Creating Highly Ordered Metal, Alloy, and Semiconductor Macrostructures by Electrodeposition, Ion Spraying, and Laser Spraying

Shaped metal deposition technique in additive manufacturing: A review

Non-Cyanide Thick Silver Electrodeposition Base on Instantaneous Nucleation for 3D Microstructures with High Performance

Additive manufacturing of Cu/Ni by selective electrochemical deposition on local conductive substrate

Paste-based 3D printing of metallic materials: effect of binders and precursor sizes

Durable Metallization of Resin Surfaces via Sacrificial Nanotransfer Lithography

Electrochemical 3D printing of Ni–Mn and Ni–Co alloy with FluidFM