Abstract:In this study, a novel approach is proposed by integrating the finite element tearing and interconnecting (FETI) method into the B-differentiable equations (BDEs) method for the analysis of 3D elastic frictional contact problem with small deformations. The contact blocks are divided into several nonoverlapping substructures with nonconforming meshes on the contact surface and the interface between two adjacent substructures. The enforcement of contact conditions and interface continuity conditions is achieved by using dual Lagrange multipliers discretized on the slave surface, typically defined with fine meshes. The modified Boolean transformation matrix is utilized to convert the contact stress into the equivalent nodal force. For large-scale elastic contact problems, the equilibrium equations for substructures and the relationship between the relative displacements and contact stresses on the contact surfaces and interfaces (i.e., the contact flexibility matrix) are efficiently computed using the FETI method. Subsequently, the governing equations consisting of the contact equations, interface continuity equations, and equilibrium equations for each floating substructure are uniformly formulated as the BDEs. These BDEs can be solved using the B-differentiable damped Newton method (BDNM). The proposed method harnesses the parallel scalability of the FETI method and extends the applicability of the BDEs algorithm, benefiting from its ability to precisely satisfy the contact constraints and theoretically ensure convergence when solving large-scale contact problems. The Hilber/Hughes/Taylor (HHT) time integration scheme is employed to investigate elastic dynamic contact problems. Numerical examples demonstrate the accuracy, convergence rate, and parallel scalability of the proposed algorithm.

Moving and Rolling Contact of 2D Elastic Bodies with Defects Using Boundary Element Method

A Scheme of Boundary Element Method for Moving Contact of 3d Elastic Solids

Numerical Simulation of 2D Moving and Rolling Contact Using Boundary Element Method

A NEW SCHEME OF BEM FOR MOVING CONTACT OF 3D ELASTIC SOLIDS

Study for 2d Moving Contact Elastic Body with Closed Crack Using Bem

Solving Two-Dimensional Moving Contact Problems with a Hole Near the Contact Interface Using the Boundary Element Method

The Boundary Contour Method for Magneto-Electro-Elastic Media with Linear Boundary Elements

Modeling of cracks in two-dimensional elastic bodies by coupling the boundary element method with peridynamics

A Scaled Boundary Finite-Element Method with B-Differentiable Equations for 3D Frictional Contact Problems

A FETI B-differentiable equation method for elastic frictional contact problem with nonconforming mesh

Simulation of 2D Elastic Bodies with Randomly Distributed Circular Inclusions Using the BEM

Boundary Element Method for non-adhesive and adhesive contacts of a coated elastic half-space

Elasto-Plastic Analysis Of Two-Dimensional Orthotropic Bodies With The Boundary Element Method

Direct Error Estimate for the Boundary Element Method for a 3-D Contact Problem

Simulation On Non-uniform Velocity DynamicCrack Growing By TDBEM

Boundary element method for normal non-adhesive and adhesive contacts of power-law graded elastic materials

An efficient method for electro-thermo-mechanical coupling effect in electrical contact on rough surfaces

A study on boundary integral equations for dynamic elastoplastic analysis for the plane problem by TD-BEM

Study on Implementation of Boundary Element Method Simulation for Lamb Wave Interaction with Defects in Elastic Plate

Analysis of the effects of rigid and elastic boundary conditions in the elastic-plastic finite element analysis of rolling contact

An Enriched Polyhedral-based Simulation for the Contact Modeling with Form Defects and Mechanical Loads