Abstract:A polyoxymethylene/graphene nanocomposite is fabricated. Graphene is modified using liquid‐phase exfoliation and KH‐550. Enhanced tribomechanical behavior is achieved with 0.5 wt% graphene, ameliorated load transfer and lubricious transfer film on the interface. In this study, a viable route to the development of a high‐performance polyoxymethylene (POM)‐based nanocomposite is proposed to overcome tribomechanical‐related issues in high‐precision sliding parts. Prior to melt‐blending, graphene nanoplatelet (GNP) filler was processed via a series of liquid‐phase exfoliation and surface modification with 3‐aminopropyltriethoxysilane. Results indicate that GNP is successfully exfoliated with minimum defect ratio and improves interfacial bonding within the matrix. Uniform dispersion and stable load‐transfer capability of POM/GNP with 0.5 wt% loading significantly enhanced flexural, tensile and impact strength by overall 26.4%, in contrast to unfilled POM. Dry friction tests against a steel ball also showed the lowest reduction in friction coefficient and wear rate by 22% and 40.6%, respectively, at the same amount of GNP loading due to the large specific surface coverage and lubricious transfer film chelation onto the steel counterface. Furthermore, dissipated energy accumulation by friction work was calculated in the sliding interfaces based on friction force–displacement hysteresis loop where the POM/GNP 0.5 wt% wear surface consumed ca 21.7% less energy in a dry frictional shearing process compared to neat POM. However, lack or excess loading of processed GNP exhibited insufficient or poor matrix–filler adhesion and led to deterioration of the composite properties due to particle agglomeration which can cause stress concentration and serve as a failure site. The adoption of the proposed methodology would demonstrate excellent material characteristics in thin‐walled precision parts where both mechanical and tribological performances are the primary concern. © 2024 Society of Chemical Industry.

Unique Rheological Response of Ultrahigh Molecular Weight Polyethylenes in the Presence of Reduced Graphene Oxide

Rheology of Ultra High Molecular Weight Polystyrene

Influence of Reduced Graphene Oxide on the Rheological Response and Chain Orientation on Shear Deformation of High Density Polyethylene

Thermal and Mechanical Properties of Ultrahigh-Molecular-Weight Ethylene/1-Hexene Copolymers Prepared by Living Polymerization with Fluorinated Bis(Phenoxy-Imine) Titanium(Iv) Catalyst

Performance Evolution of Alkylation Graphene Oxide Reinforcing High-Density Polyethylene

Enhanced Mechanical and Tribological Properties of Epoxy Composites Reinforced by Novel Hyperbranched Polysiloxane Functionalized Graphene/ MXene Hybrid

Heterogeneous Distribution of Entanglements in a Nonequilibrium Polymer Melt of UHMWPE: Influence on Crystallization Without and with Graphene Oxide

Synthesis and Tribological Performance Study of Ultrahigh Molecular Weight Polyethylene Composites Reinforced with Graphene Oxide

Superhigh-exfoliation Graphene with a Unique Two-Dimensional (2D) Microstructure for Lubrication Application

Architecture & Functionalization Evolution of RGO Affect Physicomechanical Properties of Polyolefin/rgo Composites

Effects of graphene oxide and graphene spatial orientation on tribological properties of UHMWPE composites

Preparation and Enhanced Electro-Responsive Characteristic of Reduced Graphene Oxide/polypyrrole Composite Sheet Suspensions

Thermal, Electrical and Rheological Behavior of High-Density Polyethylene/graphite Composites

Optimization through combined compromise solution and weight determination through SHANNON-ENTROPY for multi criteria decision making in tribological testing of ultrahigh molecular weight polyethylene nano-composite in SBF environment and compression testing with it's invitro analysis

Influence of an Ultralow Graphene Content on the Physical and Mechanical Characteristics of UHMWPE-Based Composites

Dielectric Polarization And Electrorheological Response Of Poly(Ethylaniline)-Coated Reduced Graphene Oxide Nanoflakes With Different Reduction Degrees

Tribological and mechanical endowments of polyoxymethylene by liquid‐phase exfoliated graphene nanofiller

Effect of Graphene on the Mechanical Properties of Recycled High-Density and High-Molecular-Weight Polyethylene Blends

The Rheological and Structural Properties of Aqueous Graphene Oxide Dispersions: Concentration and pH Dependence

The Effects of Graphene Oxide and Iron Oxide (II) Co-addition on Properties of a Polypropylene/high-density Polyethylene Blend

Size Effect on the High-Strength and Electrically Conductive Polyolefin/Reduced Graphene Oxide (RGO) Composites