Abstract:Organic solar cells (OSCs) are a promising next-generation photovoltaic technology that can be used to harvest clean and renewable solar energy. OSCs are typically composed of donor:acceptor blends as photo-active materials. Compared to the conventional inorganic silicon solar cells, OSCs are suitable for large-scale production using roll-to-roll technology, promising low-cost and the potential to avoid environmental pollution. The last few years have witnessed the rapid development of OSCs. The power conversion efficiencies (PCEs) of OSCs have surpassed similar to 14%-16%, benefiting from the design of novel materials, optimization of blend morphology, and deep understanding of the charge generation mechanism. Currently, the most widely used processing solvents for preparing high-efficient OSCs are chlorinated or aromatic solvents including chlorobenzene, dichlorobenzene, and chloroform, which are highly detrimental to the environment and human health, and may not be utilized for future in industry. Thus, replacing these highly toxic solvents with environmentally friendly alternatives called "green solvents" is an important topic in OSC research. Herein, poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b']dithiophene)-co-(1,3-di(5-thiophene-2-yl)-5,7-bis(2-ethylhexyl)benzo[1,2-c:4,5-c']dithiophene-4,8-dione)] (PBDB-T) was used as a reference material to design and synthesize a novel conjugated polymer (PBDB-DT) by extending the alkyl side chains and enlarging the conjugated side groups. The thermal stability of the polymer donor was examined via thermogravimetric analysis, showing that the polymers exhibit very good stability at >400 degrees C. Importantly, PBDB-DT exhibits good solubility in low-toxic solvent tetrahydrofuran (THF) due to its longer alkyl side chains, and shows a strong aggregation effect in THF due to the larger conjugated side groups. A favorable PCE of 10.2% was achieved for the THF-processed PBDB-DT:IT-M based OSC device. In contrast, PBDB-T has limited solubility in THF. The solar cell device based on PBDB-T:IT-M delivered a moderate PCE of 6.41%. The investigation of blend morphology via atomic force microscope suggested that the PBDB-DT:IT-M has a smooth surface, which is favorable for charge generation and transport. These results demonstrate that molecular optimization is a promising strategy to modulate the solubility and achieve high efficiency for organic photovoltaic materials processed using green solvents.

Innovative Fabrication, Characterisation and Real-World Lifetime Study of Organic Photovoltaic Devices

Tackling Energy Loss for High-Efficiency Organic Solar Cells with Integrated Multiple Strategies.

Mastering morphology of non-fullerene acceptors towards long-term stable organic solar cells

Durable Organic Photovoltaics Enabled by a Morphology‐Stabilizing Hole‐Selective Self‐Assembled Monolayer

Device engineering of non-fullerene organic photovoltaics with extrapolated operational T80 lifetime over 45,000 h in air

Pathways to Upscaling Highly Efficient Organic Solar Cells Using Green Solvents: A Study on Device Photophysics in the Transition from Lab‐to‐Fab

Recent Progress in Thick‐film Organic Photovoltaic Devices: Materials, Devices, and Processing

Improving the Thermal Stability of Organic Solar Cells via Crystallinity Control

Lifetime over 10000 hours for organic solar cells with Ir/IrOx electron-transporting layer

Enhancing Efficiency and Stability in Organic Photovoltaics through Advanced Material Design and Synthesis Strategies

Enhance Photo‐Stability of Up‐Scalable Organic Solar Cells: Suppressing Radical Generation in Polymer Donors

High Efficiency Air Stable Organic Photovoltaics with an Aqueous Inorganic Contact.

Non-fullerene Acceptor Organic Photovoltaics with Intrinsic Operational Lifetimes over 30 Years.

Unraveling High Reproducibility and Broad Composition Tolerance in High‐Efficiency Organic Solar Cells via Sequential Deposition

A Molecular Nematic Liquid Crystalline Material for High-Performance Organic Photovoltaics

Towards Efficient and Stable Organic Solar Cells: Fixing the Morphology Problem in Block Copolymer Active Layers with Synergistic Strategies Supported by Interpretable Machine Learning

Highly efficient organic photovoltaics with enhanced stability through the formation of doping-induced stable interfaces

Interface-enhanced organic solar cells with extrapolated <i>T</i><sub>80</sub> lifetimes of over 20 years

Realizing Green Solvent Processable Organic Solar Cells by Modulating the Chemical Structure of Conjugated Polymers

Stability of organic solar cells: toward commercial applications

High-performance All Polymer Solar Cells Fabricated with Non-halogenated Solvent