Abstract:For the inverted organic solar cells (OSCs), the interface contacts between the ZnO electron transporting layer and the organic active layer play an important role in the device performance and stability. Since the solution-processed ZnO surface always contains some base or zinc salt contaminants, we explored how the surface pH conditions influence the performance and stability of the nonfullerene acceptor (NFA) cells. A tight relationship between the surface pH condition and the device performance and stability was established. Specifically, device performance and stability were improved by treating the ZnO films with acid solutions but worsened after base treatment. The large number of hydroxyl groups on the surface of the solution-processed ZnO films was proved to be the main reason for the surface pH condition-related performance, which caused oxygen-deficient defects and unfavorable vertical phase separation in the blend films, hindered the photogenerated charge transfer and collection, and consequently resulted in low short-circuit current density and power conversion efficiency (PCE). The surface -OH groups also boosted the photocatalytic activity and led to fast degradation of the nonfullerene acceptor. Removal of the surface -OH groups can alleviate such problems. Different acid solutions, ZrAcac, 2-phenylethylmercaptan (PET), and glutamic acid (GC), were used to treat the ZnO films, and PET treatment was the most effective treatment for performance improvement. An efficiency of 16.46% was achieved for the PM6:Y6 cells and the long-term stability under continuous illumination conditions was significantly improved with a <i>T</i><sub>80</sub> lifetime of over 4000 h (4410 h), showing the excellent long-term stability of this heterojunction solar cell. Our understanding of the surface pH condition-related device performance and stability would guide the development of a feasible method for solving the interface problems in OSCs. We also provide a practical strategy to modify ZnO with acid solutions for high-performance and stable NFA OSCs.

High Efficiency Air Stable Organic Photovoltaics with an Aqueous Inorganic Contact.

Ultrathin and Efficient Organic Photovoltaics with Enhanced Air Stability by Suppression of Zinc Element Diffusion

Design of a Rigid Scaffold Structure Toward Efficient and Stable Organic Photovoltaics

Nonhalogenated Photoactive Layer PBDB‐T:BTP‐M‐Based Organic Solar Cells with Efficient and Stable Performance

Durable Organic Photovoltaics Enabled by a Morphology‐Stabilizing Hole‐Selective Self‐Assembled Monolayer

Highly efficient organic photovoltaics with enhanced stability through the formation of doping-induced stable interfaces

Vacuum‐Free, All‐Solution, and All‐Air Processed Organic Photovoltaics with over 11% Efficiency and Promoted Stability Using Layer‐by‐Layer Codoped Polymeric Electrodes

Organic–inorganic hybrid cathode interlayer for efficient flexible inverted organic solar modules

High-Efficiency All-Ambient Air, All-Solution and Low-Temperature Processed Nonfullerene Photovoltaics with Layer-by-Layer Co-Doped Polymeric Anodes

Organic Photovoltaics: A Cost‐Effective, Aqueous‐Solution‐Processed Cathode Interlayer Based on Organosilica Nanodots for Highly Efficient and Stable Organic Solar Cells (Adv. Mater. 38/2020)

Efficient and stable inverted structure organic solar cells utilizing surface-modified SnO 2 as the electron transport layer

Organic Ligand‐Free ZnO Quantum Dots for Efficient and Stable Perovskite Solar Cells

High Performance Inverted Organic Photovoltaics Without Hole Selective Contact

An Efficiency of 16.46% and a T 80 Lifetime of Over 4000 h for the PM6:Y6 Inverted Organic Solar Cells Enabled by Surface Acid Treatment of the Zinc Oxide Electron Transporting Layer

Highly Durable Inverted Inorganic Perovskite/Organic Tandem Solar Cells Enabled by Multifunctional Additives

Achieving over 18 % Efficiency Organic Solar Cell Enabled by a ZnO‐Based Hybrid Electron Transport Layer with an Operational Lifetime Up to 5 Years

An Efficiency of 16.46% and a T80 Lifetime of over 4000 H for the PM6:Y6 Inverted Organic Solar Cells Enabled by Surface Acid Treatment of the Zinc Oxide Electron Transporting Layer.

Organic Solar Cells: Controllable ZnMgO Electron‐Transporting Layers for Long‐Term Stable Organic Solar Cells with 8.06% Efficiency after One‐Year Storage (adv. Energy Mater. 4/2016)

Li-Doped ZnO Electron Transport Layer for Improved Performance and Photostability of Organic Solar Cells

Efficient Inverted Ito-Free Organic Solar Cells Based On Transparent Silver Electrode With Aqueous Solution-Processed Zno Interlayer

Inverted Organic Solar Cells Based on Aqueous Processed ZnO Interlayers at Low Temperature