Abstract:How processing solvents influence the overall photovoltaic performances of polymer solar cells (PSCs) remains unclear in various recently emerged new material systems. Here we systematically studied this issue by integrating an extensively used poly (3-hexylthiophene) (P3HT), or a recently developed conjugated polymer P2F-EHp, with different non-fullerene acceptors. The P3HT based devices processed with the non-halogenated solvent, 2-methylanisole in presence of 1-methylnaphthalene as solvent additive, exhibit reduced bimolecular and trap-assisted monomolecular recombination, facile charge extraction and enhanced charge carrier mobilities. Morphological investigation reveals that the optimizing crystallites, phase purity as well as nanofibrous structure is effective to the enhancement of charge generation and transport. Note that P3HT:O-IDTBR based devices processed with these non-halogenated solvents exhibit an impressive power conversion efficiency of 7.1% with a high fill factor of 75.09% on a device area of 0.05 cm2, and the efficiency remained 6.89% even in a device with large active layer area of 1 cm2 with promising thermal stability. It is also noted that efficient PSCs consisting of P2F-EHp and non-fullerene acceptors of IT-4F and IT-4Cl were developed via optimizing non-halogenated toluene:o-xylene co-solvent. The detailed investigation of film morphology demonstrated that the co-solvent appeared to assist the manipulation of crystal coherent lengths and effectively decrease the phase separation of the corresponding blend films. Of particular importance is that this material system is compatible with the low-cost blade-coating technique and can be processed under ambient conditions without post-treatment. A remarkable power conversion efficiency of 10.1% was achieved by blade-coating the P2F-EHp:IT-4F:IT-4Cl blends in air. The results indicated that using non-halogenated solvents is a promising candidate for constructing efficient PSCs toward practical applications.

Solvent Tuning of the Active Layer Morphology of Non‐Fullerene Based Organic Solar Cells

Balancing Solvent Polarity and Drying‐Kinetics for Processing Non‐Fullerene Acceptors towards High Performance Organic Solar Cells

Unraveling the Effect of Solvent Additive and Fullerene Component on Morphological Control in Organic Solar Cells

Improving Photovoltaic Performance of Non‐Fullerene Polymer Solar Cells Enables by Fine‐Tuning Blend Microstructure via Binary Solvent Mixtures

Investigating the Effect of Cosolvents on P3HT/O-IDTBR Film-Forming Kinetics and Film Morphology

Enhanced Performance of P3HT-based Non-Fullerene Polymer Solar Cells by Optimizing Film Morphology Using Non-Halogenated Solvent

Effect of solvent additive on active layer morphologies and photovoltaic performance of polymer solar cells based on PBDTTT-C-T/PC71BM

Fine‐Tuning Active Layer Morphology via Modification of Both Side Chains and Terminal Groups toward High‐Performance Organic Solar Cells

Improving Efficiency of Non-Fullerene Polymer Solar Cells by Using Non-Halogenated Solvents

Mixed Solvent as a Critical Factor in Optimizing Phase Separation of All Small Molecule Organic Solar Cells

Enabling High Efficiency of Hydrocarbon‐Solvent Processed Organic Solar Cells through Balanced Charge Generation and Non‐Radiative Loss

Effect of Different Solvents on the Performance of Ternary Polymer Solar Cells Based on Ptb7: Pc71bm: F8bt

Synergistic Effect of Solvent and Solid Additives on Morphology Optimization for High-Performance Organic Solar Cells

Solvent‐Induced Polymorphism in Non‐Fullerene‐Based Organic Solar Cells

Control of the Crystallization and Phase Separation Kinetics in Sequential Blade‐Coated Organic Solar Cells by Optimizing the Upper Layer Processing Solvent

Improved Charge Transport and Reduced Carrier Recombination of Nonfullerene Organic Solar Cells with the Binary Solvent

Revealing the underlying solvent effect on film morphology in high-efficiency organic solar cells through combined ex situ and in situ observations

Optimizing the solvent and blend morphology results in an additive-free organic photovoltaic achieving 17.8% efficiency

Improve the Performance of the All‐Small‐Molecule Nonfullerene Organic Solar Cells through Enhancing the Crystallinity of Acceptors

Effect of Solvent-Assisted Nanoscaled Organo-Gels on Morphology and Performance of Organic Solar Cells

Asymmetrical Elongation of Branched Alkyl Chains in Non‐Fullerene Acceptors for Large‐Area Organic Solar Modules