Abstract:Recent advances in lower-cost processing of titanium, coupled with its potential use as a light weight material in engines and brakes has renewed interest in the tribological behavior of titanium alloys. To help establish a baseline for further studies on the tribology of titanium against various classes of counterface materials, pin-on-disk sliding friction and wear experiments were conducted on two different titanium alloys (Ti–6Al–4V and Ti–6Al–2Sn–4Zr–2Mo). Disks of these alloys were slid against fixed bearing balls composed of 440C stainless steel, silicon nitride, alumina, and polytetrafluoroethylene (PTFE) at two speeds: 0.3 and 1.0m/s. The friction coefficient and wear rate were lower at the higher sliding speed. Ceramic sliders suffered unexpectedly higher wear than the steel slider. The wear rates, ranked from the highest to the lowest, were alumina, silicon nitride, and steel, respectively. This trend is inversely related to their hardness, but corresponds to their relative fracture toughness. Comparative tests on a Type 304 stainless steel disk supported the fracture toughness dependency. Energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD) analyses confirmed the tendency of Ti alloys to transfer material to their counterfaces and suggested possible tribochemical reactions between the ceramic sliders and Ti alloy disks. These reaction products, which adhere to the ceramic sliders, may degrade the mechanical properties of the contact areas and result in high wear. The tribochemical reactions along with the fracture toughness dependency helped explain the high wear on the ceramic sliders.

Effect of Counterface on the Tribological Behavior of Ti 3 AlC 2 at Ambient

Tribological Properties of Ti3SiC2 Coupled with Different Counterfaces

Reciprocating Friction and Wear Behavior of Ti3AlC2 and Ti3AlC2/Al2O3 Composites Against AISI52100 Bearing Steel

Effect of V Doping on the High Temperature Tribological Properties of (ti1−xvx)3alc2 Solid Solutions Sliding Against Different Counterparts

Dry-sliding Tribological Behavior of Fe–28Al–5Cr/TiC Composites

Tribological performance of Ti3SiC2 enhanced Ni3Al matrix composites

Tribological Behavior of Ti 3 AlC 2 Against SiC at Ambient and Elevated Temperatures

Insights into Wear Behavior of (tic + TiB)/TC4 Composites Against Different Counterface Materials

Tribological Behaviors and Mechanisms of Ti 3 AlC 2

Effects of Al substitution with Si and Sn on tribological performance of Ti3AlC2

Tribological Properties of Fe3Al–Fe3AlC0.5 Composites under Dry Sliding

Effects of Temperature on Friction and Wear Behaviors of TiAl Alloy and SiC Counterpart

Effect of Substrates Characteristics on Tribological Behaviors of AlTiN-Based Coated WC–Co Cemented Carbides

Tribological Behaviour of Fe–28Al–5Cr Alloy Reinforced by TiC under Acid Environment

Friction and wear of titanium alloys sliding against metal, polymer, and ceramic counterfaces

Ti3AlC2 - A soft ceramic exhibiting low friction coefficient

Effect of Ti3AlC2 Content on Electrical Friction and Wear Behaviors of Cu–Ti3AlC2 Composites

The Tribological Behaviour of Fe–28Al–5Cr/TiC under Liquid Paraffine Lubrication

Microstructural, mechanical and tribological properties of Al matrix composites reinforced with Cu coated Ti3AlC2

Tribological Behavior of Fe40Mn20Cr20Ni20 HEA Sliding Against Various Counterface Materials

Tribological Behavior of Ti3SiC2 Sliding Against Ni-based Alloys at Elevated Temperatures