Abstract:In this paper, the synthesis of poly(3,4-ethylenedioxythiophene) (PEDOT) by cyclic voltammetry (CV) electrochemical deposition and its application in the counter electrode of solid-state dye-sensitized solar cells were studied. The influence of cycle times (10 similar to 50 times) on the morphology, thickness and optical properties of PEDOT films were explored by Fourier transform infrared spectroscopy (FTIR), atomic force microscope (AFM), scanning electron microscope (SEM) and ultraviolet-visible spectroscopy (UV-Vis). The photoelectrochemical properties of solid-state dye-sensitized solar cells based on PEDOT transparent counter electrode were characterized by J-V, electrochemical impedance spectroscopy (EIS), intensity modulated photocurrent spectrum/photovoltage spectrum (IMPSNS) and Tafel analysis. The results showed that an un-uniform film with the thickness of 0.5 mu m and light transmittance of 80% was formed when CV cycle times was 10, where the PEDOT film was not completely covered on the substrate. When the CV cycles reached 30 similar to 40, a uniform and dense transparent film was obtained and the highest photo-electric conversion efficiency of the corresponding solid-state dye-sensitized solar cells reached 5.34%. This is because uniform and dense surface, good optical properties and high photo- electric catalysis properties (J(0) =2.51 X 10(-3) A.cm(-2)) for I-3 in the electrolyte, made the device obtain larger diffusion coefficient (D-n=28.80 mu m(2).ms(-1)) and carrier diffusion length (L = 21 .41 mu m), which were favorable for charge transfer. When the number of CV cycles was further increased to 50 times, showing greater roughness, the PEDOT fihn was no longer growing uniformly. The PEDOT film deposited on the FTO surface underwent some dissolution and desorption, the PEDOT film became uneven, and the catalytic activity of PEDOT electrode to I-3(-) in electrolyte was reduced. The device with PEDOT transparent counter electrode fihn deposited by cyclic voltammetry could also achieve double-side illumination with good catalytic activity to the electrolyte. Under the condition of double-side illumination, the photoelectric performance of the device using electrodeposited PEDOT as transparent counter electrode was improved by about 20%. The improvement of the photoelectric performance of the device is mainly due to the increase in the absorption of photons by the double-sided illumination.

A facile preparation of SiO 2 /PEDOT core/shell nanoparticle composite film for electrochromic device

A Poly(3,4-Ethylenedioxythiophene):Poly(styrene Sulfonic Acid)/titanium Oxide Nanocomposite Film Synthesized by Sol–gel Assisted Electropolymerization for Electrochromic Application

A Dual-Type Electrochromic Device Based on Complementary Silica/Conducting Polymers Nanocomposite Films for Excellent Cycling Stability

Preparation of Multicolor Electrochromic Polymer Composite Film with Laminated Structure

Solution-Processed Interfacial PEDOT:PSS Assembly into Porous Tungsten Molybdenum Oxide Nanocomposite Films for Electrochromic Applications

Improved electrochromic device based on mesoporous TiO2 and NiO films

Novel WO3–PEDOT core–shell inverse opal films with enhanced electrochromic performance for smart windows

Synthesis and Electrochemical Properties of a Novel Poly(ether Sulfone) with Oligoaniline Pendants

An Electrochromic Copolymer Based on Pyrrole and 3,4-Ethylenedioxythiophene Electrodeposited in Aqueous Micellar Solution

An In-Situ Synthesized Pedot:Pss/Tio2 Nanocomposite Film by Electropolymerization and Its Enhanced Electrochromic Properties

High-Performance PVDF-HFP Based Gel Polymer Electrolyte Modified by Core-Shell SiO2-PMMA for Electrochromic Devices

Soluble Polymer Facilely Self-Grown in Situ on Conducting Substrates at Room Temperature Towards Electrochromic Applications.

An all-solid-state polymeric electrochromic device based on two well-matched electrodes with fast switching time and excellent cycling stability

Electrochemical, spectroelectrochemical, and electrochromic characterization of silicon(IV) phthalocyanine with axially ligated electropolymerizable 3,4-ethylenedioxythiophene moieties

Aqueous in‐situ electrosynthesis and electrochromic performance of PEDOT:PSS/Reline film

Fabrication of All-Solid Organic Electrochromic Devices on Absorptive Paper Substrates Utilizing a Simplified Lateral Architecture

Preparation of a PB@SiO 2 Photonic Crystal Composite with Enhanced Electrochromic Performance

Improving the electrochromic properties of the composite films for electrochromic device

Electrochemical Synthesis of PEDOT and Its Application in Solid-State Dye-sensitized Solar Cells

Facile, low-cost and scalable preparation of V2O5/PEDOT:PSS inks for solution-processed multicolor electrochromic films

Electrochromic Polymers Based on 1,4-Bis((9H-carbazol-9-yl)methyl)benzene and 3,4-Ethylenedioxythiophene Derivatives as Promising Electrodes for Flexible Electrochromic Devices