Abstract:With the rapid development of modern electronic technology, addressing the heat dissipation problem of devices has become more and more urgent. Herein, the effects of molybdenum disulfide (MoS2) and hybrid hexagonal boron nitride (h-BN)/MoS2 fillers on the thermal conductivity of polydimethylsiloxane (PDMS) were investigated by reverse non-equilibrium molecular dynamics (RNEMD) simulation with fully atomistic model. Firstly, we simulated the thermal conductivity of MoS2 and BN fillers. It was found that the thermal conductivity of the two fillers enhanced with the increase of their sizes. The intrinsic thermal conductivity of MoS2 and BN obtained via the extrapolation were 52 W/(m·K) and 606 W/(m·K) separately. For 1-5 layers, the number of layers has almost no effect on the thermal conductivity of MoS2, but as the number of layers increase, the thermal conductivity of BN first decreases and then reaches a plateau. Then, we studied the thermal conductivity of the PDMS-based composites. Due to the existence of holes in the PDMS/MoS2 system, the thermal conductivity of PDMS/MoS2 composites is not much improved compared with that of PDMS. Therefore, we then introduced a hybrid BN/MoS2 filler into the composite to solve the void problem in the system. The results proved that this method was effective. The introduction of the hybrid BN/MoS2 filler effectively promoted the dispersion of the two fillers in the PDMS matrix and greatly reduced the holes in the composites. Compared with the composites filled with only one kind of filler, PDMS/BN/MoS2 composites possess better thermal conductivity. The most surprising finding is that there exists an optimal loading ratio of the two fillers, and the thermal conductivity of the composite reached the maximum when the mass ratio of the two fillers is approximately 1:1, attributed to the change of the volume fraction of holes(<math>Φ</math>). In addition, with the increase of hybrid BN/MoS2 filler content, the thermal conductivity of the composites is also increasing. The oscillating shear can also promote the orientation of the filler along the shear direction and improve the thermal conductivity of composites along that direction. Therefore, composites based on hybrid BN/MoS2 nano-fillers can be used to improve the thermal conductivity of insulating polymer materials. The findings should shed some light on the design and preparation of polymer composites with excellent thermal conductivity and electrical insulation properties.

Thermal Conductivity of Epoxy Composites Modified by Microspheric Molybdenum Disulfide

Preparation of molybdenum disulfide microspheres and their effect on the thermal conductivity of epoxy resin

Epoxy composites with functionalized molybdenum disulfide nanoplatelet additives

Unlocking Epoxy Thermal Management Capability Via Hierarchical Ce-MOF@MoS2 Hybrid Constructed by In-Situ Growth Method

Unlocking epoxy thermal management capability via hierarchical Ce-MOF@MoS 2 hybrid constructed by in-situ growth method

The Enhancement of the Thermal Conductivity of Epoxy Resin Reinforced by Bromo-Oxybismuth

Designing high thermal conductivity of polydimethylsiloxane filled with hybrid h-BN/MoS2 via molecular dynamics simulation

Surface modification of spherical silica micro‐powder using silane coupling agents and their application in epoxy resin‐based composite materials

Liquid-exfoliated MoS2 by Chitosan and Enhanced Mechanical and Thermal Properties of Chitosan/mos2 Composites

Tribological Properties of Molybdenum Disulfide and Helical Carbon Nanotube Modified Epoxy Resin

Heterostructured three-dimension MXene/short carbon fiber to enhance thermal, mechanical and tribological properties of epoxy composites

Study on thermal conductivity of micron BN-nano SiO2 combined modified epoxy resin composites

Effect of molybdenum disulfide functionalized multiwalled carbon nanotubes based hybrid on morphology, mechanical and thermal properties of epoxy nanocomposites

Interface optimization of silicone rubber/molybdenum disulfide composites for enhanced mechanical and thermal properties

Improving Fracture Toughness of Tetrafunctional Epoxy with Functionalized 2D Molybdenum Disulfide Nanosheets

Investigation of mechanical properties and thermal expansion coefficient of epoxy composites modified with MXene nanofluids

Fabrication of high-performance thermally conductive and electrically insulating polymer composites with siloxane/multi-walled carbon nanotube core-shell hybrids at low filler content

Improved thermal conductivity of epoxy resins using silane coupling agent‐modified expanded graphite

Modification of epoxy resin matrix by high-performance mesoporous silica@graphene nanocomposites

In situ synthesis, morphology, and fundamental properties of polymer/MoS 2 nanocomposites

Enhanced thermal conductivity of epoxy composites via bridged Al 2 O 3 network with in situ formed silver nanoparticles