A New Potential Natural Chalcopyrite Reference Material for in Situ Copper Isotope Microanalysis

Yuan Fang,Hui-Min Yu,Lie-Wen Xie,Shu-Bin Fang,Fang Huang,Wang-Ye Li

DOI: https://doi.org/10.1039/d3ja00105a

2023-01-01

Journal of Analytical Atomic Spectrometry

Abstract:TQ-Ccp chalcopyrite with homogeneous Cu isotope compositions provides a potential reference material for in situ Cu isotope measurement.

What problem does this paper attempt to address?

A study on a natural pyrite sample as a potential reference material for simultaneous measurement of sulfur and iron isotopes using fs-LA-MC-ICP-MSs

Lie-Wen Xie,Xiao-Jun Wang,Hui-Min Yu,Jian-Feng Gao,Lei Xu,Chao Huang,Guo-Qiang Tang,Qian Mao,Lian-Jun Feng,Yue-Heng Yang,Shi-Tou Wu,Hao Wang

DOI: https://doi.org/10.1039/d3ja00351e

2024-01-01

Journal of Analytical Atomic Spectrometry

Abstract:A natural pyrite sample has been meticulously examined and identified as a promising reference material. It is ideally suitable for the simultaneous measurement of S and Fe isotopic compositions in pyrite samples using LA-MC-ICP-MS.

spectroscopy,chemistry, analytical
New Potential Sphalerite, Chalcopyrite, Galena and Pyrite Reference Materials for Sulfur Isotope Determination by Laser Ablation‐MC‐ICP‐MS

Nan Lv,Zhian Bao,Kaiyun Chen,Chunlei Zong,Yan Zhang,Honglin Yuan,Lv Nan

DOI: https://doi.org/10.1111/ggr.12440

2022-05-24

Geostandards and Geoanalytical Research

Abstract:The sulfur isotope system is important in tracing a variety of geochemical processes. However, the availability of matrix‐matched reference materials for in situ sulfur isotope ratio measurement is limited. This study analysed four sulfide specimens to investigate their potential as reference materials for in situ sulfur isotope determination, including three natural sulfide minerals (sphalerite SPH‐1, chalcopyrite GC‐1, galena NWU‐GN), and one resin preserved pyrite powder (RPPY). These four sulfides were analysed independently in four laboratories using both bulk and microbeam analysis techniques, all of which gave equivalent results within uncertainty with comparable accuracy and precision. The sulfur isotopes of these four sulfides are homogeneous based on a large number of isotope determinations by solution nebulisation multi‐collector inductively coupled plasma‐mass spectrometry (MC‐ICP‐MS) and laser ablation (LA) MC‐ICP‐MS. The mean δ34S values for SPH‐1, RPPY, GC‐1 and NWU‐GN determined by gas source isotope ratio mass spectrometry (GS‐IRMS) and solution nebulisation MC‐ICP‐MS are ‐7.13 ± 0.41‰ (2s), 3.66 ± 0.24‰ (2s), ‐0.65 ± 0.28‰ (2s), 28.21 ± 0.17‰ (2s) relative to the Vienna‐Canyon Diablo troilite (V‐CDT) reference value, respectively, and which are proposed as potential preferred values. Over 400 spot analyses performed on randomly selected fragments of each sulfide by LA‐MC‐ICP‐MS yielded highly consistent δ34S values with the preferred values. Thus, SPH‐1, GC‐1, NWU‐GN and RPPY are considered a set of candidate matrix‐matched sulfide reference materials for in situ sulfur isotope determination.

geochemistry & geophysics
Copper Isotope Ratio Measurements of Cu-Dominated Minerals Without Column Chromatography Using MC-ICP-MS

Yan Zhang,Zhian Bao,Nan Lv,Kaiyun Chen,Chunlei Zong,Honglin Yuan

DOI: https://doi.org/10.3389/fchem.2020.00609

IF: 5.5

2020-07-16

Frontiers in Chemistry

Abstract:This study performed a series of comparable experiments (with or without column chromatography) to evaluate whether non-deviated Cu isotope ratios can be obtained directly by Nu Plasma II multi-collector inductively coupled plasma-mass spectrometry (MC-ICP-MS) using standard-sample bracketing with Ga as internal mass bias correction model (C-SSBIN) without column chromatography. Twelve Cu-dominated minerals (copper plate, native copper, chalcopyrite, bornite, chalcocite, digenite, covellite, tetrahedrite, azurite, malachite, atacamite, and cyanotrichite) displayed little drift in δ65Cu values compared with those of minerals with column chromatography, with Δδ65Cuwithout−with ranging from −0.04 to +0.02‰. This means that Cu isotope ratios in Cu-dominated minerals can be achieved without column chromatography, due to the simple matrix and the stability of the machine by using C-SSBIN mode. The acidity and internal standard concentration mismatch effects, as well as the matrix effect, were strictly assessed by Nu Plasma II MC-ICP-MS in a wet-plasma mode in the State Key Laboratory of Continental Dynamics (SKLCD). Finally, a long-term reproducibility of better than ±0.03‰ [n = 38, 2 standard deviations (2s)] were achieved by repeatedly measuring chalcopyrite without column chromatography over 4 months.

chemistry, multidisciplinary
High Precision In-Situ Pb Isotopic Analysis of Sulfide Minerals by Femtosecond Laser Ablation Multi-Collector Inductively Coupled Plasma Mass Spectrometry

HongLin Yuan,Cong Yin,Xu Liu,KaiYun Chen,ZhiAn Bao,ChunLei Zong,MenNing Dai,ShaoCong Lai,Rong Wang,ShaoYong Jiang

DOI: https://doi.org/10.1007/s11430-015-5095-5

2015-01-01

Science China Earth Sciences

Abstract:An in-situ microanalysis of Pb isotopic compositions in sulfide minerals is carried out by using femtosecond laser-ablation multi-collector inductively coupled plasma mass spectrometry(fs LA-MC-ICP-MS).High-temperature-activated carbon was used to filter Hg contained in the carrier gas,which reduced the Hg background signal by 48%and also lowered the detection limit of the analysis.Fractionation and mass discrimination effects existing in the ICP-MS analytical processes were corrected using an internal reference Tl in conjunction with an external reference NIST SRM 610.The proposed method was used to analyze the Pb isotopic compositions of chalcopyrite,pyrite,and sphalerite from the Dulong Sn-Zn-In polymetallic ore district.The results showed that in this ore district,the sulfide minerals and different grains of the same sulfide mineral show a large variation in Pb content up to 1000-fold.The studied pyrites show relatively higher Pb contents and homogeneous Pb isotopic compositions,whereas the sphalerites have low Pb contents but most variable Pb isotopic compositions.It is suggested that the large variation of Pb isotopic composition may reflect a late hydrothermal superimposition on the primary sulfide formation.In addition,radiogenic Pb accumulated by radioactive decay of trace amounts of U over time in the host minerals may also be one of the causes for the large variation range of Pb content and Pb isotopic composition of those low-Pb sphalerites.Chalcopyrite and sphalerite grains with Pb content greater than 10 ppm presented a consistent Pb isotopic distribution,whereas all the sulfide grains with Pb content greater than 100 ppm had consistent Pb isotopic composition within 2s measurement uncertainties.The in-situ analysis of Pb isotopic composition agreed well with the results obtained by conventional chemical methods within2s measurement uncertainties,indicating that the data obtained by fs LA-MC-ICP-MS are reliable.Additionally,this study indicates that the Pb isotopic composition could truthfully record the source of ore-forming minerals only for sulfide minerals with high Pb content.On the contrary,the Pb isotopic composition of low-Pb sulfide minerals may be affected by trace amounts of U in the host minerals that may lead to a highly radiogenic Pb isotope ratio.Alternatively,it is also possible that late fluid metasomatic overprinting may alter the Pb isotopic compositions.
In situ Hf isotope analysis of cassiterite by LA-MC-ICP-MS: protocol and applications

Ming Yang,Yue-Heng Yang,Rolf L. Romer,Shi-Tou Wu,Tao Wu,Hao Wang

DOI: https://doi.org/10.1039/d2ja00340f

2023-01-01

Journal of Analytical Atomic Spectrometry

Abstract:We report the laser ablation multi-collector inductively coupled plasma mass spectrometry (LA-MC-ICP-MS) Hf-176/Hf-177 ratios for cassiterite of a known age and demonstrate that the Hf-176/Hf-177 ratios can be measured accurately and reproducibly with adequate precision for cassiterite with Hf contents around 100 mu g g(-1). Although cassiterite only has minor rare earth elements (REEs), corrections for Yb and Lu interferences are required as they may affect the determination of the Hf-176/Hf-177 ratios. Among the investigated samples, Rond-A has a homogeneous Hf isotopic composition. We recommend cassiterite sample Rond-A as a primary reference material for in situ Hf isotope analysis. The Kard sample has a homogeneous Hf isotopic composition and is suitable as a primary reference material once its Hf isotopic composition has been confirmed by solution-based MC-ICP-MS. Samples BB#7, 19MP, and 19GX showed minor variations in their Hf isotopic compositions and, therefore, can only be used as secondary reference materials.
A potential stibnite reference material for sulfur isotope determination by LA-MC-ICP-MS

Zhi-hui Dai,Shan-ling Fu,Yue-fu Liu,Yu-miao Meng,Zhi-an Bao,Ke-jun Hou,Ting-guang Lan

DOI: https://doi.org/10.1039/d3ja00308f

2024-01-01

Journal of Analytical Atomic Spectrometry

Abstract:A natural stibnite (BJ-Snt) is recommended as a potential reference material for S isotope analysis employing laser ablation multicollector inductively coupled plasma-mass spectrometry (LA-MC-ICP-MS).

spectroscopy,chemistry, analytical
Three new potential sulfur reference materials (pyrite, gypsum, and arsenopyrite) for in situ sulfur isotope analysis by laser ablation MC-ICP-MS

Deyi Peng,Zhian Bao,Kaiyun Chen,Lv Nan,Xiaojuan Nie,Jing Tian,Honglin Yuan

DOI: https://doi.org/10.1039/d4ja00200h

2024-07-25

Journal of Analytical Atomic Spectrometry

Abstract:Sulfur isotopes serve as critical tracers for understanding the material sources and cycling in earth science. The in situ sulfur isotope ratio analysis by laser ablation multiple-collector inductively coupled plasma-mass spectrometry (LA-MC-ICP-MS) has been a proven important technique, yet the precision and accuracy of measurement are limited by matrix-matched reference materials. In this study, we investigated three new potential reference materials (pyrite NWU-Py, gypsum NWU-Gy and arsenopyrite NWU-Apy) for sulfur isotope ratio analysis by LA-MC-ICP-MS. The ultra-fine powders of pyrite, gypsum and arsenopyrite were synthesized into a solid block using the fast-hot-pressing sintering method (FHP). The reliability of these reference materials was evaluated by large quantities of sulfur isotope measurements by LA-MC-ICP-MS, with mean δ 34 S values of 3.48 ± 0.26‰ (2SD, n = 787) for NWU-Py, 18.19 ± 0.32‰ (2SD, n = 290) for NWU-Gy, and −0.19 ± 0.32‰ (2SD, n = 383) for NWU-Apy, which are highly consistent with those obtained from isotope ratio mass spectrometry (IRMS). Furthermore, the F -testing and H-index indicate that the three materials have excellent homogeneity of sulfur isotope compositions. Therefore, NWU-Py, NWU-Gy, and NWU-Apy can serve as bracketing matrix-matched reference materials for in situ sulfur isotope measurement by LA-MC-ICP-MS.

spectroscopy,chemistry, analytical
Basaltic and Solution Reference Materials for Iron, Copper and Zinc Isotope Measurements

Jin Li,Suo-han Tang,Xiang-kun Zhu,Zhi-hong Li,Shi-Zhen Li,Bin Yan,Yue Wang,Jian Sun,Yao Shi,Aiguo Dong,Nick S. Belshaw,Xingchao Zhang,Sheng-ao Liu,Ji-hua Liu,Deli Wang,Shao-yong Jiang,KeJun Hou,Anthony S. Cohen

DOI: https://doi.org/10.1111/ggr.12241

2018-01-01

Geostandards and Geoanalytical Research

Abstract:Iron, Cu and Zn stable isotope systems are applied in constraining a variety of geochemical and environmental processes. Secondary reference materials have been developed by the Institute of Geology, Chinese Academy of Geological Sciences (CAGS), in collaboration with other participating laboratories, comprising three solutions (CAGS‐Fe, CAGS‐Cu and CAGS‐Zn) and one basalt (CAGS‐Basalt). These materials exhibit sufficient homogeneity and stability for application in Fe, Cu and Zn isotopic ratio determinations. Reference values were determined by inter‐laboratory analytical comparisons involving up to eight participating laboratories employing MC‐ICP‐MS techniques, based on the unweighted means of submitted results. Isotopic compositions are reported in per mil notation, based on reference materials IRMM‐014 for Fe, NIST SRM 976 for Cu and IRMM‐3702 for Zn. Respective reference values of CAGS‐Fe, CAGS‐Cu and CAGS‐Zn solutions are as follows: δ56Fe = 0.83 ± 0.07 and δ57Fe = 1.20 ± 0.13, δ65Cu = 0.57 ± 0.06, and δ66Zn = −0.79 ± 0.12 and δ68Zn = −1.65 ± 0.24, respectively. Those of CAGS‐Basalt are δ56Fe = 0.15 ± 0.07, δ57Fe = 0.22 ± 0.10, δ65Cu = 0.12 ± 0.08, δ66Zn = 0.17 ± 0.13, and δ68Zn = 0.34 ± 0.26 (2s).
In situ carbon stable isotope measurement for graphite using LA-MC-ICP-MS

Jihao Zhang,Chao Li,Xinwei Li,Wei Wang,PengYue Yu,Limin Zhou,Wenjun Qu,Pengyue Yu

DOI: https://doi.org/10.1039/d3ja00402c

2024-02-08

Journal of Analytical Atomic Spectrometry

Abstract:Graphite, a nonmetallic mineral composed of carbon, relies on carbon stable isotopes for tracing the material source, growth enrichment and mineralization processes. In this study, we leverage laser ablation multi-collector inductively coupled plasma mass spectrometry (LA-MC-ICP-MS) to establish an in situ analysis method with medium resolution (∼5000) for carbon stable isotopes. Two potential in-house graphite reference materials from the Lutang deposit in Hunan Province and the Changshouyuan deposit in Jiangxi Province, China, were prepared using the tableting method. Twenty measurements on each of the two samples indicate relatively homogeneous carbon stable isotope composition with a RSD of uncorrected 13 C/ 12 C ratios at approximately 0.030% (LTSM: 0.032%, CSY: 0.027%). Additionally, the laser repetition rate was gradient changed (2–20 Hz) to investigate the influence of concentration effect caused by changes in the signal-to-noise ratio (SNR) on the measurement results. When the SNR > 1.23, 13 C/ 12 C-2SE no longer drops significantly. Constructing working curves of the SNR and isotope ratio can correct the concentration effect. No matrix effect was observed between the two graphite samples. A slight matrix effect was observed between graphite and dolomite and a strong matrix effect exists between graphite and calcite. The δ 13 C analysis of graphite from six different mining areas was conducted, and the LA-MC-ICP-MS results, when corrected using the standard-sample-bracketing (SSB) method and LTSM samples, exhibit reasonable agreement with the δ 13 C values reported in previous and current studies using IRMS. This study demonstrates the feasibility of in situ measurement of carbon stable isotopes in graphite using LA-MC-ICP-MS, characterized by high efficiency, cost-effectiveness and high spatial resolution. The two types of graphite are suitable to be used as reference materials for in situ measurement of carbon stable isotopes in graphite using LA-MC-ICP-MS.

spectroscopy,chemistry, analytical
Characterisation of Five Natural Magnetite Reference Materials for In Situ Iron Isotope Measurement with Application to Magmatic Ni‐Cu Sulfide Mineralisation

Yantong Feng,Wen Zhang,Yawen Bao,Xianli Zeng,Hong Liu,Tao Luo,Zhaochu Hu,Mingjie Zhang,Yu Wang,Yan Yang,Shengjiang Liu

DOI: https://doi.org/10.1111/ggr.12592

2024-11-27

Geostandards and Geoanalytical Research

Abstract:Key Points Fe isotope ratios are characterised for five natural magnetite crystals using SN‐MC‐ICP‐MS and LA‐MC‐ICP‐MS. These magnetite crystals are homogeneous in terms of Fe isotopes and are available as reference materials. Significant variations in Fe isotope ratio are observed in Jinchuan magnetites, indicating potential value in elucidating magmatic Ni‐Cu sulfide mineralisation. Iron isotope ratios in magnetite have been widely used to reveal critical geological and biological processes. Laser ablation multi‐collector inductively coupled plasma‐mass spectrometry (LA‐MC‐ICP‐MS) is ideally suited for measurement of Fe isotope ratios, however the lack of suitable reference materials poses a significant challenge for in situ Fe isotopic measurements in magnetites. In this study, five high‐quality natural magnetite crystals were characterised for Fe isotope ratios using solution nebulisation (SN)‐MC‐ICP‐MS and LA‐MC‐ICP‐MS. The effects of LA‐MC‐ICP‐MS analytical conditions were investigated to obtain precise and accurate Fe isotope ratios. The yielded intermediate measurement precisions for the δ56Fe values in the five investigated magnetites were ± 0.05–0.06‰ (2s) using SN‐MC‐ICP‐MS and ± 0.08–0.14‰ (2s) using LA‐MC‐ICP‐MS. Magnetites with homogeneous Fe isotopic compositions in hand‐specimen measurements and microanalysis can serve as potential reference materials for in situ Fe isotopic measurement. Furthermore, the Fe isotope ratios in the magnetites from the Jinchuan Ni‐Cu‐PGE sulfide deposit were measured using LA‐MC‐ICP‐MS with natural magnetite as the bracketing calibrator. The increase in the Fe isotopic composition with magmatic sulfide evolution was primarily dominated by oxygen fugacity (fO2) and hydrothermal fluids. This finding implies that the Fe isotopic composition of magnetite can serve as a potential geochemical indicator of magmatic Ni‐Cu sulfide mineralisation.

geochemistry & geophysics
Speciation and Distribution of Copper in A Mining Soil Using Multiple Synchrotron-Based Bulk and Microscopic Techniques

Jianjun Yang,Jin Liu,James J. Dynes,Derek Peak,Tom Regier,Jian Wang,Shenhai Zhu,Jiyan Shi,John S. Tse

DOI: https://doi.org/10.1007/s11356-013-2214-8

2013-01-01

Environmental Science and Pollution Research International

Abstract:Molecular-level understanding of soil Cu speciation and distribution assists in management of Cu contamination in mining sites. In this study, one soil sample, collected from a mining site contaminated since 1950s, was characterized complementarily by multiple synchrotron-based bulk and spatially resolved techniques for the speciation and distribution of Cu as well as other related elements (Fe, Ca, Mn, K, Al, and Si). Bulk X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectroscopy revealed that soil Cu was predominantly associated with Fe oxides instead of soil organic matter. This agreed with the closest association of Cu to Fe by microscopic X-ray fluorescence (U-XRF) and scanning transmission X-ray microscopy (STXM) nanoanalysis, along with the non-occurrence of photoreduction of soil Cu(II) by quick Cu L3,2-edge XANES spectroscopy (Q-XANES) which often occurs when Cu organic complexes are present. Furthermore, bulk-EXAFS and STXM-coupled Fe L3,2-edge nano-XANES analysis revealed soil Cu adsorbed primarily to Fe(III) oxides by inner-sphere complexation. Additionally, Cu K-edge μ-XANES, L3,2-edge bulk-XANES, and successive Q-XANES results identified the presence of Cu2S rather than radiation-damage artifacts dominant in certain microsites of the mining soil. This study demonstrates the great benefits in use of multiple combined synchrotron-based techniques for comprehensive understanding of Cu speciation in heterogeneous soil matrix, which facilitates our prediction of Cu reactivity and environmental fate in the mining site.
Natural Clinopyroxene Reference Materials for in situ Sr Isotopic Analysis via LA-MC-ICP-MS

Han Zhao,Xin-Miao Zhao,P. J. Le Roux,Wen Zhang,Hao Wang,Lie-Wen Xie,Chao Huang,Shi-Tou Wu,Jin-Hui Yang,Fu-Yuan Wu,Yue-Heng Yang

DOI: https://doi.org/10.3389/fchem.2020.594316

IF: 5.5

2020-12-09

Frontiers in Chemistry

Abstract:Clinopyroxene is a major host mineral for lithophile elements in the mantle lithosphere, and therefore, its origin is vital for constraints on mantle evolution and melt generation. In situ Sr isotopic measurement of clinopyroxene has been available since the recent development of laser ablation multicollector inductively coupled plasma mass spectrometry (LA-MC-ICP-MS) in the 2000s. Therefore, there is an increasing demand for natural clinopyroxene reference materials for Sr isotope microanalysis. In this contribution, we present six natural clinopyroxene reference materials from South Africa (JJG1424) and China (YY09-47, YY09-04, YY09-24, YY12-01, and YY12-02) for Sr isotope microanalysis. The Sr content of these clinopyroxenes ranges from 50 to 340 μg g −1 , which covers most natural clinopyroxene compositions. Homogeneity of these potential reference materials were investigated and evaluated in detail over a 2-year period using 193-nm nanosecond and 257-nm femtosecond laser systems coupled to either a Neptune or Neptune Plus MC-ICP-MS. Additionally, the major and trace element of these clinopyroxenes were examined by electron probe microanalyzer (EPMA) as well as solution and laser ICP-MS. The in situ 87 Sr/ 86 Sr values obtained for the six natural clinopyroxene reference materials agree well with data obtained using the thermal ionization mass spectrometer (TIMS) method. The Sr isotopic stability and homogeneity of these clinopyroxenes make them potential reference materials for in situ Sr microanalysis to correct instrumental fractionation or as quality control materials for analytical sessions. The new Sr isotope data provided here might be beneficial for microbeam analysis in the geochemical community.

chemistry, multidisciplinary
Potential Orthopyroxene, Clinopyroxene and Olivine Reference Materials for in Situ Lithium Isotope Determination

Ben‐Xun Su,Xiao‐Yan Gu,Etienne Deloule,Hong‐Fu Zhang,Li,Xian‐Hua Li,Nathalie Vigier,Yan‐Jie Tang,Guo‐Qiang Tang,Yu Liu,Kwan‐Nang Pang,Aaron Brewer,Qian Mao,Yu‐Guang Ma

DOI: https://doi.org/10.1111/j.1751-908x.2014.00313.x

2015-01-01

Geostandards and Geoanalytical Research

Abstract:Over 1400 electron probe and 700 ion probe microanalyses were performed on eleven mineral separates to evaluate their potential as reference materials for in situ Li isotopic determination. Our results suggest the homogenous distributions of major elements, Li and its isotopes for each sample. Hence, these samples are suitable to be used as reference materials for in situ measurements of Li abundance and Li isotopes by secondary ion mass spectrometry (SIMS) or laser ablation‐inductively coupled plasma‐mass spectrometry (LA‐ICP‐MS). These samples have the advantage of mitigating probable matrix effects during calibration owing to the wide range of compositions. The effect of composition on the δ7Li of olivine measured by SIMS is a linear function of composition, with δ7Li increasing by 1.0‰ for each mole per cent decrease in forsterite component.
Columbite SN3: A New Potential Reference Material for U-Pb Dating by LA-ICP-MS

Lu Xiang,Rucheng Wang,Rolf L. Romer,Xudong Che,Huan Hu,Zhimin Tang

DOI: https://doi.org/10.1111/ggr.12500

2023-01-01

Geostandards and Geoanalytical Research

Abstract:Columbite-tantalite LA-ICP-MS U-Pb dating is a fast and useful method to determine the age of rare-metal deposits and fingerprint the provenance of columbite-tantalite ore concentrates. Accurate LA-ICP-MS U-Pb dating requires matrix-matched reference materials. We analysed three columbite-tantalite samples (SN3, HND and RL2) from China using ID-TIMS and LA-ICP-MS to assess their potential as reference materials for in situ U-Pb dating. Coltan 139 and these three columbite-tantalite samples with variable compositions yielded internally consistent LA-ICP-MS U-Pb ages when using each other for calibration and the weighted mean Pb-206/U-238 ages are comparable to respective ID-TIMS ages. Composition-dependent U-Pb fractionation seems to be insignificant under the LA-ICP-MS conditions used. Sample SN3 has a low percentage of heterogeneity for Pb-206/U-238 ages (4%) with low common Pb contributions (f(206) < 1%) and shows a good potential in calibrating unknown samples as primary reference material for LA-ICP-MS analysis. Samples RL2 and HND have altered sections characterised by high LREE contents, flat LREE patterns and old Pb-206/U-238 apparent ages, and are not suited as reference materials. The low Pb-207/Pb-206 intercepts for samples RL2 and HND lack geological meaning but provide strong evidence that the disturbed U-Pb systematics with anomalous apparent Pb-206/U-238 ages is a secondary feature.
OXF: A new natural reference material for use in LA–ICP–MS U–Pb columbite–tantalite geochronology

Liyuan Qing,Tao Luo,Zhaochu Hu,Yang Li,Liang-Liang Zhang,Jia-Run Tu,Wen Zhang,Keqing Zong

DOI: https://doi.org/10.1039/d4ja00195h

2024-06-26

Journal of Analytical Atomic Spectrometry

Abstract:Columbite–tantalite is predominantly found in rare-metal granites and pegmatites, alkaline and carbonatitic rocks, and columbite–tantalite-bearing peraluminous granites. It is recognized as a potentially valuable mineral for use in U–Pb isotopic dating. Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) can be used in the U–Pb dating of columbite–tantalite. LA-ICP-MS requires matrix-matched reference materials for isotopic fractionation/mass bias correction. Some columbite–tantalite reference materials contain common Pb. However, columbite–tantalite reference materials with low contents of common Pb are scarce. Thus, in this study, we proposed a new potential reference material, OXF, with a low common Pb content for use in LA-ICP-MS U–Pb dating of columbite–tantalite. LA-ICP-MS analysis revealed that the average U, Th, and Pb concentrations in OXF are 428 ± 156 ppm (2s), 6.3 ± 2.5 ppm (2s), and 20.0 ± 10.0 ppm (2s), respectively, with a total weight of 336.6 g. Chemical abrasion isotope dilution thermal ionization mass spectrometry (CA-ID-TIMS) revealed that the weighted mean 206Pb/238U age of OXF is 262.85 ± 0.64 Ma (MSWD = 1.8, 2s). The LA-ICP-MS U–Pb ages of the four laboratories in the China University of Geosciences (Wuhan) (CUGW), the China University of Geosciences (Beijing) (CUGB), Wuhan Sample Solution Analytical Technology Co. Ltd., China (WHSS), and the Institute of Geology and Geophysics, Chinese Academy of Sciences (IGGCAS) were determined. The 206Pb/238U ages of the CUGW, the CUGB, WHSS, and the IGGCAS were 262.71 ± 0.33 Ma (2s, n = 151), 263.3 ± 2.3 Ma (2s, n = 46), 263.5 ± 1.3 Ma (2s, n = 42) and 264.3 ± 2.4 Ma (2s, n = 25), respectively. The weighted mean 206Pb/238U age of the four laboratories obtained using LA-ICP-MS and by combining the U–Pb data obtained from the laboratories were 262.83 ± 0.29 Ma (2s, n = 358), which aligns with its value obtained using CA-ID-TIMS after allowing for analytical uncertainties. OXF demonstrated homogeneous U–Pb ages with minimal Pb contributions, indicating that its potential for serving as a primary reference material in LA-ICP-MS calibrations.

spectroscopy,chemistry, analytical
Copper isotopic zonation in the Northparkes porphyry Cu–Au deposit, SE Australia

Weiqiang Li,Simon E. Jackson,Norman J. Pearson,Stuart Graham

DOI: https://doi.org/10.1016/j.gca.2010.04.003

IF: 5

2010-01-01

Geochimica et Cosmochimica Acta

Abstract:Significant, systematic Cu isotopic variations have been found in the Northparkes porphyry Cu–Au deposit, NSW, Australia, which is an orthomagmatic porphyry Cu deposit. Copper isotope ratios have been measured in sulfide minerals (chalcopyrite and bornite) by both solution and laser ablation multi-collector inductively coupled plasma-mass spectrometry (MC-ICP-MS). The results from both methods show a variation in δ65Cu of hypogene sulfide minerals of greater than 1‰ (relative to NIST976). Significantly, the results from four drill holes through two separate ore bodies show strikingly similar patterns of Cu isotope variation. The patterns are characterized by a sharp down-hole decrease from up to 0.8‰ (0.29±0.56‰, 1σ, n=20) in the low-grade peripheral alteration zones (phyllic–propylitic alteration zone) to a low of ∼−0.4‰ (−0.25±0.36‰, 1σ, n=30) at the margins of the most mineralized zones (Cu grade >1wt%). In the high-grade cores of the systems, the compositions are more consistent at around 0.2‰ (0.19±0.14‰, 1σ, n=40). The Cu isotopic zonation may be explained by isotope fractionation of Cu between vapor, solution and sulfides at high temperature, during boiling and sulfide precipitation processes. Sulfur isotopes also show an isotopically light shell at the margins of the high-grade ore zones, but these are displaced from the low δ65Cu shells, such that there is no correlation between the Cu and S isotope signatures. Fe isotope data do not show any discernable variation along the drill core. This work demonstrates that Cu isotopes show a large response to high-temperature porphyry mineralizing processes, and that they may act as a vector to buried mineralization.
Development of two novel natural calcite reference materials for enhanced in situ elemental and Sr isotopic analysis.

Xuna Yin,Miaohong He,Le Zhang,Guanhong Zhu,Wenfeng Deng,Gangjian Wei

DOI: https://doi.org/10.1039/d4ja00003j

2024-03-15

Journal of Analytical Atomic Spectrometry

Abstract:In situ trace-elemental and Sr isotopic compositions of calcite have become powerful tools to unravel detailed geological processes. However, the accuracy of such analyses is contingent upon the availability of appropriate reference materials, particularly for carbonates with low strontium concentrations. Herein, the homogeneity of Sr isotope and trace elements of two natural calcites, BZS and WS-1 with low and moderate Sr content (212 and 598 μg g‒1), was evaluated through a large number of LA−(MC−)ICP−MS analyses. The result demonstrated that both BZS and WS-1 have homogeneous Sr isotopic compositions with mean 87Sr/86Sr values of 0.71181 ± 0.00013 (2SD, n =183) and 0.70872 ± 0.00009 (2SD, n =184), respectively. These values are consistent with the solution-based MC-ICP-MS measurements, which yield mean values of 0.71181 ± 0.00001 for BZS and 0.70872 ± 0.00003 for WS-1. Additionally, BZS displays uniformity in trace elements of Mn, Sr, Y (RSD <10%) and all REEs (RSD <20%), while WS-1 shows homogeneous Mg, Mn, and Sr (RSD <10%). Notably, their low Rb/Sr ratios (<0.0002) and, Yb and Er contents (< 2.70 μg g‒1 and < 2.86 μg g‒1, respectively) further indicate that these materials have limited isobaric interference of 87Rb and negligible interference of double charge interference of Er2+ and Yb2+ on Sr isotopes analyses. Consequently, BZS and WS-1 could be considered as potential natural calcite reference materials for accurate in situ elemental and Sr isotopic analyses in low-Sr carbonates.

spectroscopy,chemistry, analytical
Variation of chalcophile elements in base metal sulfide minerals from the Jinchuan magmatic Ni Cu sulfide deposit, NW China: Implications for mineral exploration

Long-Jiao Li,Xian-Cheng Mao,Zhan-Kun Liu,Yong-Cai Wang,De-Xian Li,Qi-Xing Ai,Yun-Qi Wang

DOI: https://doi.org/10.1016/j.gexplo.2024.107440

IF: 4.166

2024-02-01

Journal of Geochemical Exploration

Abstract:Magmatic sulfide ores from the western and eastern intrusions of the world's third-largest Jinchuan Ni–Cu deposit are separated into disseminated, net-textured, and massive sulfides, or Fe-rich, transitional, Cu-rich ores. However, the composition of base metal sulfide (BMS) minerals from each intrusion and ore type still lacks investigation. By comparing the variations of chalcophile element composition of BMS minerals from different intrusions, sulfide textures, and ore types, new discriminant diagrams are constructed for subsequent exploration. BMS minerals from the eastern intrusion host more slightly chalcophile elements (Zn As, Sn Cd) because of the higher degree of crustal contamination, and less strongly chalcophile elements (Co, Bi, Se, Re, Ag, Te) due to the lower amount of prior sulfide segregation. R-factor modeling indicates that disseminated sulfides are formed at the highest R-factors, while massive sulfides are formed at the lowest. Correspondingly, R-factor upgrading results in higher concentrations of Se and Ag in BMS minerals from disseminated sulfides compared to net-textured sulfides. Most chalcophile elements in BMS minerals show positive or negative correlations with whole-rock Cu/Nic ratios (Nic represents corrected whole-rock Ni content after deducting Ni in olivine), suggesting extensive chalcophile element fractionation occurred during progressive sulfide fractionation. Furthermore, the elements that are slightly to moderately incompatible with monosulfide solid solution (MSS) while predominately hosted by BMS minerals (e.g., Cd, Se, Ag, and Te in chalcopyrite) show better correlations, making them preferable for tracing the sulfide fractionation. Utilizing the partial least squares-discriminant analysis models, we propose plots of Cd/(Co + As) vs. Bi/(Co + As), Ag vs. Bi/(Ag + Cd), and Co/(Ag + Cd) vs. Bi/(Ag + Cd) to discriminate chalcopyrite from different intrusions, sulfide textures, and ore types, respectively. Additionally, the occurrence of chalcopyrite with increased Bi/(Ag + Cd) and Co/(Ag + Cd) ratios and decreased Ag content presents promising clues for exploring Fe-rich massive sulfide ores.

geochemistry & geophysics
Characterization of reference materials for in situ U-Pb dating of columbite group minerals by LA-ICP-MS

Ming Yang,Yue-Heng Yang,Rolf L. Romer,Xu-Dong Che,Ru-Cheng Wang,Fu-Yuan Wu,Guang-Chun Fei,Yun Deng,Tao Wu

DOI: https://doi.org/10.1039/d3ja00162h

2023-01-01

Journal of Analytical Atomic Spectrometry

Abstract:Columbite group minerals generally incorporate considerable amounts of U, making them promising minerals for in situ U-Pb dating and constraining the time of Nb-Ta mineralization. Columbite group minerals may have uranium-rich inclusions and metamict domains and may show complex internal textures with recrystallization. To avoid such disturbances, isotopic measurements with high spatial resolution are needed. The laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) technique, which is widely used for U-Pb dating with high spatial resolution, requires homogeneous reference materials for external calibration. Herein, we present in situ U-Pb ages, ranging from & SIM;2050 Ma to & SIM;136 Ma and chemical compositions for ten columbite group minerals considered potential reference materials. Our study indicates that CT3, Buranga, Rongi and SN3 contain very limited amounts of common Pb and can be used as primary reference materials for in situ U-Pb dating. Coltan17, ZKW, DDB, HND and RL2 show variable common Pb contents but have robust U-Pb ages that allow them to be used as primary reference materials. Among them, Coltan17 needs to be further characterized by applying the isotope dissolution thermal ionization mass spectrometry (ID-TIMS) method. A new ID-TIMS weighted average Pb-206/U-238 age of Coltan139 of 507.8 & PLUSMN; 1.3 Ma (2s, MSWD = 0.9; n = 6) is reported. This study demonstrates that Coltan139 contains relatively high and variable common Pb contents. Therefore, special attention should be given to the selected measurement areas when using Coltan139 as the primary reference material.

A New Potential Natural Chalcopyrite Reference Material for in Situ Copper Isotope Microanalysis

A study on a natural pyrite sample as a potential reference material for simultaneous measurement of sulfur and iron isotopes using fs-LA-MC-ICP-MSs

New Potential Sphalerite, Chalcopyrite, Galena and Pyrite Reference Materials for Sulfur Isotope Determination by Laser Ablation‐MC‐ICP‐MS

Copper Isotope Ratio Measurements of Cu-Dominated Minerals Without Column Chromatography Using MC-ICP-MS

High Precision In-Situ Pb Isotopic Analysis of Sulfide Minerals by Femtosecond Laser Ablation Multi-Collector Inductively Coupled Plasma Mass Spectrometry

<i>In situ</i> Hf isotope analysis of cassiterite by LA-MC-ICP-MS: protocol and applications

A potential stibnite reference material for sulfur isotope determination by LA-MC-ICP-MS

Three new potential sulfur reference materials (pyrite, gypsum, and arsenopyrite) for in situ sulfur isotope analysis by laser ablation MC-ICP-MS

Basaltic and Solution Reference Materials for Iron, Copper and Zinc Isotope Measurements

In situ carbon stable isotope measurement for graphite using LA-MC-ICP-MS

Characterisation of Five Natural Magnetite Reference Materials for In Situ Iron Isotope Measurement with Application to Magmatic Ni‐Cu Sulfide Mineralisation

Speciation and Distribution of Copper in A Mining Soil Using Multiple Synchrotron-Based Bulk and Microscopic Techniques

Natural Clinopyroxene Reference Materials for in situ Sr Isotopic Analysis via LA-MC-ICP-MS

Potential Orthopyroxene, Clinopyroxene and Olivine Reference Materials for in Situ Lithium Isotope Determination

Columbite SN3: A New Potential Reference Material for U-Pb Dating by LA-ICP-MS

OXF: A new natural reference material for use in LA–ICP–MS U–Pb columbite–tantalite geochronology

Copper isotopic zonation in the Northparkes porphyry Cu–Au deposit, SE Australia

Development of two novel natural calcite reference materials for enhanced in situ elemental and Sr isotopic analysis.

Variation of chalcophile elements in base metal sulfide minerals from the Jinchuan magmatic Ni Cu sulfide deposit, NW China: Implications for mineral exploration

Characterization of reference materials for in situ U-Pb dating of columbite group minerals by LA-ICP-MS