Abstract:To address the issues of large imaging errors for small defects and the difficulty in depth evaluation using local wavenumber estimation for surface defect imaging, a novel three-dimensional (3D) evaluation method for surface defects using broadband laser-generated Rayleigh waves with wavenumber analysis is proposed. A finite element model is established to investigate the interaction between the Rayleigh wave and the surface defect and reveal the wavenumber change mechanism of the non-dispersive Rayleigh wave in the case of defects. It is discovered that when the Rayleigh wave encounters the surface defect, various mode-converted scattered waves are generated, resulting in the appearance of new components with wavenumbers lower than that of the incident Rayleigh wave in the wavenumber domain. Additionally, the maximum amplitude of the Rayleigh wave in the B-scan image increases as the defect depth increases. Based on the simulation analysis, a 3D evaluation method for surface defects is proposed. Firstly, the scattered Rayleigh wave caused by the defect is extracted using frequency-wavenumber analysis. Secondly, a space-frequency-wavenumber analysis is used to determine the local wavenumber of the scattered Rayleigh wave for defect imaging. Finally, the defect depth is estimated by analyzing the maximum amplitude of the Rayleigh wave. A surface defect detection experiment is conducted to verify the effectiveness of the proposed method, and the experimental results demonstrate that the proposed method can suppress noise interference and accomplish high-precision imaging of small surface defects compared to the traditional method. Moreover, the method can establish a linear mapping relationship between the defect depth and the maximum amplitude of the Rayleigh wave for depth evaluation. The research results can provide a potential application for the 3D evaluation of surface defects.

Simulation for Embedded-Defects Foam Terahertz Images of Active Bifocal Terahertz Imaging System at 0.22 THz Based on Geometric Optics

Modeling of a Multireflector Terahertz Imaging System Using a Geometrical Optics Model Based on Angular Spectrum Theory.

Research on Internal Defect Detection of Epoxy Glass Fiber Composites Based on Terahertz Imaging Technology

Numerical simulation research and applications on scattering imaging of surface defects on optical components

Surface defects evaluation system based on electromagnetic model simulation and inverse-recognition calibration method

Effects of Diffuse and Specular Reflections on Detecting Embedded Defects of Foams With a Bifocal Active Imaging System at 0.22 THz

Distortion Correction in Surface Defects Evaluating System of Large Fine Optics

A Novel 3D Evaluation Method for Surface Defects Using Broadband Laser-Generated Rayleigh Waves with Wavenumber Analysis.

Quantifying Hidden Defect In Multi-Layered Structures By Using Eddy Current System Combined With A Scanner

Width and Depth Gauging of Rectangular Subsurface Defects Based on All-Optical Laser-Ultrasonic Technology

A simulation imaging method for actual optical system and results analysis

Quantitative Measurement for the Structure of Defects on Optical Surface with Lensless Fourier Transform Digital Holographic Microscopy

Detection of Double-layer Air Gap Defects Based on Terahertz Imaging Method

Bifocal Dual Reflector System for Active Terahertz Imaging.

Scanning Track of an Active Bifocal Terahertz Imaging System

Terahertz Imaging Method for Composite Insulator Defects Based on Edge Detection Algorithm.

Structural Design and Simulation of a Multi-Channel and Dual Working Condition Wafer Defect Inspection Prototype

Research on terahertz real-time near-field spectral imaging

Practical Dual-Band Terahertz Imaging System.

3D simulation for scatter light distribution of optical surface defects

Optical Far-Field Detection of Sub-λ/14 Wide Defects by Conjugate Structured Light-Field Microscopy (C-Sim)