Abstract:In this paper, a novel magnetohydrodynamic attitude adjustment method is proposed, which only uses a spherical magnetohydrodynamic attitude controller for three-axis attitude adjustment. The electromagnetic field equations and fluid flow equations are simultaneously solved using a finite volume method. The purpose of the simulation is to analyze the influences of changing parameters of geometric design of the proposed mechanism on the magnetic field distribution, flow field distribution, angular momentum, and output torque. Also, the influences of different numbers of poles and slots on the magnetic field distribution, flow field distribution, and attitude adjustment parameters are studied. It was found that the magnetic induction intensity, fluid velocity, angular momentum, and torque produced by the electromagnetic actuator with 4 poles and 24 slots are almost the largest in the proposed mechanism. Therefore, 4 poles and 24 slots are selected as the design parameter of the electromagnetic actuator. Furthermore, the magnetic field distribution, flow field distribution, angular momentum, and the output torque in four different fluid domains are studied. It was found that the angular momentum increases with the increase in the range of flow field. However, for a certain range of flow, the increase in angular momentum is minimum. In addition, the output torque produced by the fluid does not change basically with the flow field range. According to the numerical results, a combination of pole and slot numbers and the range of flow field are proposed for the physical design of the proposed mechanism. Note that this study can provide a reference for the optimal design of the proposed mechanism. Key words: Magnetohydrodynamic, fluid momentum controller, numerical simulation, angular momentum, output torque. Tables 3, Figs 20, Refs 22.

NUMERICAL SIMULATION OF THE INFLUENCE OF GEOMETRIC PARAMETERS ON A SPHERICAL MAGNETOHYDRODYNAMIC ATTITUDE CONTROLLER

Numerical Simulation of the Coupled Magnetic and Liquid Flow Fields in a Spherical Magnetohydrodynamic Attitude Control Device

Numerical Simulation of the Fluid Motion in a Spherical Magnetohydrodynamic Attitude Controller

Numerical Calculation of the Magnetic Field in a Spherical Magnetohydrodynamic Attitude Controller

Sun-pointing Safe Control for Atmospheric Environment Monitoring Satellite Using Magnetic Actuation

Relative roll control of satellite docking using electromagnetic coils

Numerical simulation of the flow field in a spherical MHD attitude controller

Numerical Simulation of Thermal Distribution under Steady State in a Spherical Magnetohydrodynamic Attitude Controller

Shape Optimization of the Momentum Ring Cross Section for Satellite Attitude Control Based on Magnetohydrodynamics

An Evaluation of Torque Characteristics of a Spherical Magnetohydrodynamic Attitude Control Device

Numerical Simulation Study of Fluid Field Based on a Magnetohydrodynamics Momentum Ring

Design and Optimization of a Magnetically Levitated Inductive Reaction Sphere for Spacecraft Attitude Control

Design and Analysis of MHD-based Momentum Ring for Satellite Attitude Adjustment

Robust Proportional-Differential Control Via Eigenstructure Assignment for Active Magnetic Bearings-Rigid Rotor Systems

Multi-Objective Optimal Design of Μ–controller for Active Magnetic Bearing in High-Speed Motor

Vibration Control for Active Magnetic Bearing High-Speed Flywheel Rotor System with Modal Separation and Velocity Estimation Strategy

Modeling and Design of a 3-DOF Magnetic Bearing with Toroidal Radial Control Coils

Reconfigurable Asymmetric Embedded Magnetorquers for Attitude Control of Nanosatellites

Hybrid Actuator Optimal Angular Momentum Management with Analytical Solution for Spacecraft Attitude Agile Maneuvering Mission

Output Feedback Dynamical Compensation Via EigenStructure Assignment for Active Magnetic Bearings-Rigid Rotor Systems.

Study on Inverter-fed Three-pole Active Magnetic Bearing