Abstract:In this paper, a balanced-to-balanced filtering directional coupler (FDC) that can realize a 3 dB coupling degree directional coupler with high isolation and directivity is proposed. The design of the proposed FDC is primarily based on microstrip/slotline transition structures, resonance structures, and odd–even mode phase velocity compensation structures. A U-type microstrip feed line integrated with a stepped-impedance slotline resonator is adopted at the input and output ports, which makes the differential-mode (DM) responses independent of the common-mode (CM) ones, and brings superior DM transmission and CM suppression. In addition, by loading the microstrip stub-loaded resonators (SLRs), a DM passband with sharp filtering performance is realized, and transmission zeros (TZs) can be added into the design, which makes it more selective. Moreover, phase compensating slotlines are added into the coupling structure to enhance the isolation. In order to verify the feasibility of the proposed design method, an FDC prototype circuit was made and tested. The simulation results are in good agreement with the measured results. The designed coupler’s DM operating band covers 2.65 GHz to 3 GHz (FBW = 12.4%), and the insertion and return losses are 4.6 dB and 20 dB, respectively. The isolation degree is better than 15 dB, and the CM suppression is more than 55 dB. The total coupler size is about 67.7 mm × 63.8 mm. The designed balanced-to-balanced FDC can be widely used in S-band wireless communication systems.

A Compact Directional Coupler with High Directivity Using Ferrite Cores

A Broadband Directional Coupler Based On Ferrite Cores

A Dual-Band Coupled-Line Coupler with an Arbitrary Coupling Coefficient

Compact Microstrip Line Directional Coupler with High Directivity

A Highly Reconfigurable Low-Power CMOS Directional Coupler

A Symmetrical Broadband Tight-Coupled Directional Coupler with High Directivity Using Three-Folded-Coupled Lines

A novel compact directional coupler with high directivity based on CRLH transmission lines

A Lumped-Element Directional Coupler for Bandwidth Enhancement, Impedance Matching, and Harmonic Suppressions

An Inductive and Capacitive Integrated Coupler and Its LCL Compensation Circuit Design for Wireless Power Transfer

Design of high-power small-size directional coupler

Design of Broadband Miniaturized Dual Directional Coupler

Design. Fabricate and Test of A New Kind of High Power Microwave Directional Coupler

Compact Directional Coupled-Line Coupler with Independent Power Division Ratios at Dual Bands

The Design of S-band Broadband Directional Coupler

DIRECTIONAL COUPLER USING MULTI-STAGE COUPLED STRUCTURE THEORY

A Compact Dielectric Waveguide Directional Coupler Utilizing A Tapering Left-Handed Slab Core

Design of a Compact Wideband Easy-to-integrate Stripline Directional Coupler

A Novel Design Of Ku Band Coaxial - Waveguide Directional Coupler Used For The Measurement Of The Short-Circuited Line Method

A Compact Circular Waveguide Directional Coupler for High-Order Mode Vacuum Electronic Devices

A MINIATURIZED DIRECTIONAL COUPLER USING COMPLEMENTARY SPLIT RING RESONATOR AND DUMBBELL-LIKE DEFECTED GROUND STRUCTURE

A Balanced Filtering Directional Coupler with Wide Common-Mode Suppression Based on Slotline Structure