Abstract:At present, the degree of industrialization in China is deepening, and various types of production equipment appear. However, during the startup and operation of mechanical equipment, fracture and wear will occur due to various factors. Therefore, once the mechanical equipment fails, it must be diagnosed as soon as possible to avoid serious economic losses and casualties. Rotating machinery is an important power device, so it is necessary to regularly detect and monitor equipment signals to avoid the consequences of wrong control methods. In this study, the fault diagnosis of rotating machine based on adaptive vibration signal processing is studied under the safe environmental conditions. The fault diagnosis process of rotating machinery is to first collect vibration signals, then process signal noise reduction, and then extract fault characteristic signals to further identify and classify fault status and diagnose fault degree. This study briefly introduces several rotating machinery vibration signal processing methods and identifies the fault state of the rotating machine based on the high-order cumulant. By building a DDS fault diagnosis test bench, the chaotic particle swarm parameter optimization algorithm is used to calculate the accurate stochastic resonance parameters. After noise processing, the high-frequency part is significantly reduced. The results show that, after stochastic resonance wavelet decomposition and denoising processing, the number of intrinsic functions can be significantly reduced, the fault frequency can be increased, the high-frequency noise can be reduced, and the fault analysis accuracy can be improved. We identify the fault state of rotating machinery based on the high-order cumulant, train the four states of the bearing, and compare the four types of faults, no fault, inner ring fault, rolling element fault, and outer ring fault through the comparison of the actual test set and the predicted test set. It is concluded that the rotating machinery fault belongs to the rolling element fault and the identification accuracy rate is 95%. Finally, based on the LMD morphological filtering, the rotating machinery fault diagnosis is carried out, and the feature extraction is carried out based on the LMD algorithm to decompose the bearing fault signal. Finally, the result after the morphological filtering and LMD decomposition and extraction can avoid noise interference.

Identification Method of Unbalanced Fault Characteristics of Horizontal Shaft of Rotary Table of Drilling Rig

A New Procedure for Extracting Fault Feature of Multi-Frequency Signal from Rotating Machinery

Research on Vibration Response of a Multi-Faulted Rotor System Using LMD-based Time-Frequency Representation

Signal Acquisition and Analysis of Shaft Unbalance Vibration Test

Fault Diagnosis of Rotary Parts of a Heavy-Duty Horizontal Lathe Based on Wavelet Packet Transform and Support Vector Machine

Improved High Resolution Estimation Approach for Rotor Fault Diagnosis

Unbalance Identification of Nonlinear Rotor System Based on Holospectrum Analysis

Unbalanced Feature Identification of Rotor System Based on Fused Cross‐Correlation Fast Fourier Transform

On-Line Identification and Diagnosis of Unbalance Forces of the Rotor of Rotating Machines

On-line Unbalance Identification of Flexible Rotor System

Fault Diagnosis of Rolling Bearing Based on Wavelet Packet and Fourier Analysis

Self-recovery Principle and Method for Unbalanced Vibration of Rotating Machinery

Fault Detection in Rotor-Bearing System Using Measured Vibration Data

A vibration analysis method based on hybrid techniques and its application to rotating machinery

Multiple Frequency Modulation Components Detection and Decomposition for Rotary Machine Fault Diagnosis

Rotating Machinery Fault Diagnosis Based on Adaptive Vibration Signal Processing under Safety Environment Conditions

A new multi-disk shaft balancing method for rotating machinery using strain gauges

A tacholess order tracking method based on the STFTSC algorithm for rotor unbalance fault diagnosis under variable-speed conditions

Research on the Rotor Fault Diagnosis Method Based on QPSO-VMD-PCA-SVM

Rotor imbalance detection and quantification in wind turbines via vibration analysis

Fault detection and classification of the rotor unbalance based on dynamics features and support vector machine