Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Efficient fault identification method for dual rotor-supporting system using model-based method

Research on Vibration Response of a Multi-Faulted Rotor System Using LMD-based Time-Frequency Representation

Effective Model Based Fault Detection Scheme for Rudder Servo System

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Fault Identification of Rotor Machine Based on Optimized Method

Identification Of Multi-Concurrent Fault In A Steam Turbine Rotor System Using Model-Based Method

IDENTIFIABILITY OF FAULT MODEL AND ITS APPLICATION

Modeling and simulation analysis of dual-rotor vibration system with multiple faults

Improved High Resolution Estimation Approach for Rotor Fault Diagnosis

On-line Unbalance Identification of Flexible Rotor System

Application of Multiple-Model Estimation Method to Rotor Fault Diagnosis

Hybrid Model Based Identification of Local Rubbing Fault in Rotor Systems

Fault Detection in Rotor-Bearing System Using Measured Vibration Data

Technique for Diagnosing Fault of Rotor Vibration Based on Improved Fuzzy SVM

A New Dynamic Balance Framework Based on Blind Source Separation under Multiple Fault Conditions

Identification of Multi-Fault in Rotor-Bearing System Using Spectral Kurtosis and EEMD

An Identification Method for Excitation Location and Its Application in Faults Location

Modelica-based Object-Orient Modeling of Rotor System with Multi-Faults

Research on the Rotor Fault Diagnosis Method Based on QPSO-VMD-PCA-SVM

Fault Diagnosis for Rotor Based on Multi-Sensor Information and Progressive Strategies

Rotor Vibration Fault Diagnosis Method Based on WCFSE-FSVM