Abstract:All-inorganic CsPbBr3 perovskite solar cells (PSCs) have attracted more attentions due to the excellent environmental stability, however, the wide bandgap and relatively poor crystallinity of CsPbBr3 have been the main obstacle to improve their power conversion efficiency (PCE). Herein, we proposed an efficient and simple strategy of precursor additive in the two-step aqueous-solution method, the resulted CsPbBr3 film has achieved more uniform grain size, almost pure perovskite phase, smoother surface, less defects, enhanced light absorption and longer carrier lifetime. This is due to the rapid evaporation of additive (IPA and CH3OH) in the CsBr/H2O precursor leads to a relatively higher local CsBr concentration on the surface of PbBr2, which can provide more nucleation sites and accelerate the crystallization of perovskite. Further, when utilizing the optimal additive of 5% (in volume) IPA, the HTM-free carbon-based CsPbBr3 PSCs obtained a PCE improvement from 9.09% to 10.29%, and an ultrahigh fill factor (FF) of 85.21%. What is more, by adding 0.1 mol/L PbCl2 into the PbBr2 solution in the first step, the open circuit voltage of device has increased from 1.36 V to 1.48 V, the champion PCE reached 10.37% (steady output PCE of 10.17%), and the non-encapsulated device could maintain 85% of its initial efficiency after 50 d in the air. This work provides a cost-effective approach to grow CsPbBr3 film and boosts the efficiency benchmark of the CsPbBr3 PSCs to more than 10%, it is desirable that the highly efficient and stable CsPbBr3 PSCs can be developed in future.

Modulated CH 3 NH 3 PbI 3−x Br x film for efficient perovskite solar cells exceeding 18%

Modulated CH3NH3PbI3−xBrx Film for Efficient Perovskite Solar Cells Exceeding 18%

Stable Hole-Free, Carbon-Based CsPbI3 Perovskite Solar Cells Achieving 12.45 %-Efficiency at a Low Temperature with Mn Doping and Excess CsBr Simultaneously

Tunable Br-doping CH 3 NH 3 PbI 3−x Br X Thin Films for Efficient Planar Perovskite Solar Cells

Uniform CH3NH3PbI3-xBrx Film for Efficient Planar Perovskite Solar Cells Via Facile PbBr2 Pre-Coating Layer Treatment

A Halide Exchange Engineering for CH3NH3PbI3−Br Perovskite Solar Cells with High Performance and Stability

Optimization of the Photoelectric Properties and Photo-Stability of CH3NH3PbBrXI3-X Films for Efficient Planar Perovskite Solar Cells

High-quality CsPbBr3 films prepared by introducing methylammonium iodide into PbBr2 precursor for efficient perovskite solar cells

Improvement of Photovoltaic Performance of the Inverted Planar Perovskite Solar Cells by Using CH3NH3PbI3−xBrx Films with Solvent Annealing

Facile fabrication of large-grain CH 3 NH 3 PbI 3− x Br x films for high-efficiency solar cells via CH 3 NH 3 Br-selective Ostwald ripening

Fabrication of Porous Lead Bromide Films by Introducing Indium Tribromide for Efficient Inorganic CsPbBr3 Perovskite Solar Cells

Improved Photovoltaic Performance of CsPbI2Br Perovskite Films Via Bivalent Metal Chloride Doping

NaBr-Modified CsPbI2Br Improves the Comprehensive Performance of the Solar Cells

Ultrahigh Fill-Factor All-Inorganic CsPbBr3 Perovskite Solar Cells Processed from Two-Step Solution Method and Solvent Additive Strategy

Promoted Charge Extraction in All-Inorganic CsPbBr3 Perovskite Solar Cells by a CsPbX3 (X = Br and I) Quantum Dot Interface Layer

Highly Crystalline CsPbI2Br Films for Efficient Perovskite Solar Cells Via Compositional Engineering

CH3NH3PbI3-xBrx Perovskite Solar Cells Via Spray Assisted Two-Step Deposition: Influence of Bromide on the Device Performance

Enhanced performance of CH3NH3PbI3 perovskite solar cells by excess halide modification

Regulated film quality with MABr addition in two-step sequential deposition for boosting the performance of perovskite solar cells

CH 3 NH 3 PbI 3−x Br X Perovskite Solar Cells Via Spray Assisted Two-Step Deposition: Impact of Bromide on Stability and Cell Performance

Regulated Film Quality With Methylammonium Bromide Addition In A Two-Step Sequential Deposition To Improve The Performance Of Perovskite Solar Cells