Abstract:In recent years, metal halide perovskite solar cells have developed rapidly, with certified power conversion efficiency of over 25% for single-junction solar cells. However, these devices still face challenges such as low efficiency and poor reproducibility, where the quality of the absorbing layer is an essential factor affecting the performance of perovskite solar cells. The triple-cation perovskite thin films prepared based on the two-step method have residuals of lead iodide and a large number of grain boundaries and other defects, leading to the charge carrier recombination and thus to degrade the cell photovoltaic performance. Solvent annealing is a method to improve the performance of perovskite solar cells and has been proven to improve the efficiency and reproducibility. Herein, this work introduced chlorobenzene solvent annealing during the preparation of the organic layer of the perovskite thin film. The results show that the treated perovskite film have increased the grain size of the perovskite thin film and meanwhile reduced its defects. At the same time, this treatment significantly reduced the residual lead iodide in the perovskite film, resulting in an improvement in the reproducibility of the devices. Moreover, this treatment also contributed to enhance the specific gravity of radiative recombination and to prolong the carrier lifetime in the film, thus improving the efficiency of the solar cell. As a result, the cell efficiency and reproducibility were improved, where the average and the highest efficiencies were increased by 16.38% and 5.87%, respectively, compared to the perovskite solar cells prepared without the chlorobenzene solvent annealing treatment. Therefore, this work provides a promising idea for improving the quality of perovskite films and further optimizing the efficiency of perovskite solar cells.

Improvement of Photovoltaic Performance of the Inverted Planar Perovskite Solar Cells by Using CH3NH3PbI3−xBrx Films with Solvent Annealing

Optimization of the Photoelectric Properties and Photo-Stability of CH3NH3PbBrXI3-X Films for Efficient Planar Perovskite Solar Cells

A Halide Exchange Engineering for CH3NH3PbI3−Br Perovskite Solar Cells with High Performance and Stability

Microstructure Modulation Of The Ch3nh3pbi3 Layer In Perovskite Solar Cells By 2-Propanol Pre-Wetting And Annealing In A Spray-Assisted Solution Process

Mixed-solvent-vapor Annealing of Perovskite for Photovoltaic Device Efficiency Enhancement

(Invited) Improvement of Perovskite Films and the Perovskite/TiO2Interface

Improving the photovoltaic performance of planar heterojunction perovskite solar cells by mixed solvent vapor treatment

Thermal Assisted Oxygen Annealing for High Efficiency Planar CH3NH3PbI3 Perovskite Solar Cells

CH3NH3PbI3-xBrx Perovskite Solar Cells Via Spray Assisted Two-Step Deposition: Influence of Bromide on the Device Performance

CH 3 NH 3 PbI 3−x Br X Perovskite Solar Cells Via Spray Assisted Two-Step Deposition: Impact of Bromide on Stability and Cell Performance

Chlorobenzene solvent annealing of perovskite thin films for improving efficiency and reproducibility of perovskite solar cells

Growth of Compact CH3NH3PbI3 Thin Films Governed by the Crystallization in PbI2 Matrix for Efficient Planar Perovskite Solar Cells.

Enhanced Performance of CH3NH3PbI3−x Cl X Perovskite Solar Cells by CH3NH3I Modification of TiO2-perovskite Layer Interface

Vacuum-Assisted Thermal Annealing of CH3NH3PbI3 for Highly Stable and Efficient Perovskite Solar Cells

Solvent annealing process for wide bandgap perovskite solar cells

Influence of halide composition on the structural, electronic, and optical properties of mixed CH$_3$NH$_3$Pb(I$_{1-x}$Br$_x$)$_3$ perovskites calculated using the virtual crystal approximation method

Facile fabrication of large-grain CH 3 NH 3 PbI 3− x Br x films for high-efficiency solar cells via CH 3 NH 3 Br-selective Ostwald ripening

Fast Thermal Annealing of CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3-x</sub>Cl<sub>x</sub> Films for Improving Hybrid Photovoltaics

Improved performance of CH3NH3PbBr3 perovskite solar cells utilizing PbI2 precursors

Effect of Br Content on Phase Stability and Performance of H2N=CHNH2Pb(I1−xBrx)3 Perovskite Thin Films

Post-annealing of MAPbI3 Perovskite Films with Methylamine for Efficient Perovskite Solar Cells