Abstract:The noise-shaping (NS) SAR ADC is an emerging hybrid architecture that achieves high resolution and power-efficiency simultaneously by combining the merits of the SAR ADC and the AIADC, making it attractive to sensor readout and healthcare applications. To implement NS, most prior works adopted the classic cascaded integrator feed-forward (CIFF) structure for noise filtering [1-5]. Opamp-based integrators were used in [1-3] to achieve a relatively sharp noise transfer function (NTF), but at the cost of power and scaling friendliness. Reference [4] demonstrated 2 <sup>nd</sup> -order NS using fully passive switched-capacitor (SC) integrators, but has limited NS and thermal noise performance. Reference [5] combines passive SC filters with a dynamic amplifier (D-amp) to achieve good noise and power, but is vulnerable to process-voltage-temperature (PVT) variations. In addition, no prior NS SAR has realized complex NTF zeros for optimum NS. This presents a need for an NS SAR ADC that can combine optimized NTF, power efficiency and PVT robustness. To overcome the limitations of existing work, instead of adopting the CIFF structure, this paper presents a 2 <sup>nd</sup> -order NS SAR ADC using an error-feedback (EF) structure. It highlights the capability of realizing optimized complex NTF zeros by simply using charge sharing summation, a passive SC FIR and a comparator-reused dynamic amplifier with PVT tracking. This work achieves sharp NS performance while maintaining both hardware and power efficiency merits of the NS SAR with improved robustness. The prototype chip, fabricated in 40nm CMOS, achieves a 79dB SNDR at an OSR of 8 using a 9b SAR, resulting in a peak Schreier FoM of 178dB.

A Two-Phase Linear-Exponential Incremental ADC with Second-order Noise Coupling.

An 18-Bit 2MSPS SAR ADC with Double Passive Noise-Shaping Calibration

A Two-step Linear-Exponential Incremental ADC with Slope Extended Counting.

Modeling of a 14-bit, 100-MS/s pipelined ADC with digital nonlinearity calibration

A Two-Phase Multi-Bit Incremental ADC with Variable Loop Order

A Fully Dynamic 4-Channel 13b Simultaneous Sampling Incremental ΔΣ ADC Using Cascoded Floating-Inverter-Amplifier and Code Division Multiplexing Technique

A Zoom Architecture Using Linear-Exponential Incremental ADC

A Maximum-Likelihood-Estimation-Based Digital Background Calibration Technique for Interstage Gain Error in Pipelined ADCs

A 10.12μw 101.98Db-Sndr Three-step Incremental Analog-to-Digital Converter

A 95-Db DR Second Order Incremental ΣΔ ADC for Multi-Channel Healthcare Application

An 828-Μ W 100.9-Db SNDR 20-Khz BW Zoom-Linear-Exponential Incremental ADC with Split Positive Feedback and Duty-Cycle Amplifier

A 13-Enob 2nd-Order Noise-Shaping Sar Adc Realizing Optimized Ntf Zeros Using An Error-Feedback Structure

A High-Resolution Discrete-Time Second-Order ΣΔ ADC with Improved Tolerance to KT/C Noise Using Low Oversampling Ratio

Analysis and Optimization Scheme of a 2Nd-Order Passive Noise Shaping SAR ADC Architecture

A Second-Order Noise-Shaping SAR ADC with Passive Integrator and Tri-Level Voting

Recent Advances in High-Resolution Hybrid Discrete-Time Noise-Shaping ADCs

A Second-Order Purely VCO-Based CT $\delta\sigma$ ADC Using a Modified DPLL Structure in 40-Nm CMOS

A 13-Bit ENOB Third-Order Noise-Shaping SAR ADC Employing Hybrid Error Control Structure and LMS-Based Foreground Digital Calibration

A $130\mu \mathrm{w}$ Three-Step DT Incremental $\displaystyle \delta\sum$ ADC Achieving 107.6db DR and 99.3db SNDR with Zoom and Extended-Range Counting

A 0.029-Mm2 17-Fj/conversion-step Third-Order CT $\delta\sigma$ ADC with a Single OTA and Second-Order Noise-Shaping SAR Quantizer

A 98.5-dB DR Incremental ΔΣ ADC with Dynamic Zoom and Extended Counting for Audio Application