Abstract:High precision accelerometers play a vital role in the measurement of the Earth’s gravitational field. They can be used in the rotating-accelerometer-based gravity gradient instrument (GGI) to detect the change of the gravity gradient. For that application, the high precision accelerometers should have a noise floor of below 1 $\text{n}{g}/ (Hz)^{1/2}$ , and both have a measurement range with dozens of $\text{m}{g}$ for working on a shipborne or airborne moving platform. Therefore, the high precision accelerometers require a wide dynamic range of at least 150 dB. However, the off-the-shelf accelerometers with 150-dB dynamic range cannot meet the requirement of the GGI due to their high self-noise floor. In this article, a metal flexure electromagnetic rebalance accelerometer with both low noise and wide dynamic range is proposed. For the spring-mass structure design, a pair of metal leaf springs is applied to support the proof mass with a fundamental frequency of 8.3 Hz and a large cross-axis rejection ratio of 2913.4. The detailed noise analysis of the proposed accelerometer is conducted to ensure the self-noise of the accelerometer can meet the target noise floor. Finally, the proposed accelerometer is evaluated and calibrated with the results showing the scale factor of (398.6 ± 0.2) V/ ${g}$ , the measurement range of ±27 $\text{m}{g}$ , and the self-noise of 0.5 $\text{n}{g}/ (Hz)^{1/2}$ at 0.4–2 Hz. In this case, the dynamic range of the proposed accelerometer can be derived as 152 dB at 0.4–2 Hz, which meets the current requirement of the GGI and other high precision applications.

Nano-g Optical Accelerometer with a Large Dynamic Range and Low Noise Floor

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

Nano-g Micro-Optics Accelerometer With Force Feedback Control and Improved Dynamic Range

Optical Design and Analysis of a High Resolution MOEMS Accelerometer Based on Diffraction Grating

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Optical Acceleration Measurement Method with Large Non-ambiguity Range and High Resolution Via Synthetic Wavelength and Single Wavelength Superheterodyne Interferometry

Single Chip-Based Nano-Optomechanical Accelerometer Based on Subwavelength Grating Pair and Rotated Serpentine Springs

A Novel Scheme Design of a High-G Optical NEMS Accelerometer Based on a Single Chip Grating with Proper Sensitivity and Large Bandwidth

Design and Modification of a High-Resolution Optical Interferometer Accelerometer

A Seismic-Grade Optical MEMS Accelerometer with Force Feedback Control

An Opto-mechanical MEMS Accelerometer with Noise Floor of 40 ng/Hz<sup>1/2</sup>

Design and Demonstration of an Electromagnetic Force-Rebalanced Sub-10-Hz Interferometric MEMS Accelerometer

A Nano-g Electromagnetic Accelerometer with 152-Db Wide Dynamic Range

Microseismic Observation Enabled by High-Sensitivity Micromechanical Interferometers

An Optical Interferometry Based MEMS Accelerometer Applicable to Seismic-Grade Measurement

High-precision Vibration Detection Based on Nano-Cavity Optomechanical Accelerometer

A microchip optomechanical accelerometer

Nano-g Optical Fiber Accelerometer with Double-Leaf Spring Structure

A Miniature Optical Force Dual-Axis Accelerometer Based on Laser Diodes and Small Particles Cavities

High Sensitivity Optical MEMS Accelerometer Based on a Metal Fabry–Pérot Microcavities Wavelength Modulation System

A Sensitive Micromachined Resonant Accelerometer for Moving-Base Gravimetry