Numerical Simulation Study on Combustion Characteristics and NOx Emission of COREX Gas Swirl Burner and Boiler

Jingwen Liu,Yifan Zhu,Hao Zhou

DOI: https://doi.org/10.1016/j.fuel.2023.129128

IF: 7.4

2023-01-01

Fuel

Abstract:To tackle the problem of high nitrogen oxide (NOx) emissions and low combustion efficiency when burning COREX gas, a type of high-calorific gas that is a by-product of the Ouye furnace, a low-NOx burner with broad applicability was designed. In this study, the feasibility of flue gas recirculation technology applied to a swirl burner of COREX gas was investigated through Fluent numerical simulation, and the effect of central flue gas recirculation ratio on burner combustion characteristics and NOx generation rate was analyzed. The results indicated that the implementation of central flue gas recirculation reduced the NOx concentration from 288.4 mg/m3 to 101.48 mg/m3. To further reduce nitrogen oxide emissions, an interlayer structure for flue gas was proposed to be installed between the COREX gas and internal secondary air. Flue gas was extracted from the tail of the boiler and introduced into the interlayer structure, thereby delaying the fuel and internal secondary air mixing while achieving uniform diffusion of low-temperature and low-oxygen flue gas into the combustion zone. Compared with the structure without flue gas interlayer, the NOx concentration can be reduced from 101.48 mg/ m3 to 61.54 mg/m3 by passing the flue gas through the central passage and flue gas interlayer with a mass ratio of 3:5.The study demonstrated that the low-NOx burner designed in this paper had sound inhibition effects on thermal and prompt NOx. Based on both actual operation and simulation results, it was observed that the outlet NOx concentration could be regulated within 100 mg/m3 across varying boiler loads. This marks the first application of a low-NOx burner for the combustion of COREX gas in China.