Abstract:This study endeavors to realize the concurrent utilization of marine soft clay (MSC) and industrial waste, specifically calcium carbide residue (CCR) and fly ash (FA), through a series of experimental investigations. The optimal ratio between CCR and FA, as well as the efficacy of the composite agent (CF–1), were examined, and an empirical equation associating the unconfined compressive strength ( q u ) of stabilized MSC was developed through unconfined compressive strength (UCS) tests. Microscopic analyses, including X–ray diffraction (XRD), scanning electron microscopy (SEM), and energy–dispersive spectroscopy (EDS), were employed to unveil the intrinsic mechanisms underlying CF–1 stabilized MSC. Subsequently, the suitability of CF–1 solidified MSC as a roadbed filler was ascertained through laboratory tests. Results revealed the optimum CCR:FA ratio for CF–1 to be 4:1, demonstrating superior curing effects compared to individual components such as Portland cement (PC), CCR, and FA, with commendable environmental and economic benefits. The developed empirical equation exhibited effectiveness in predicting the q u of CF–1 solidified MSC under varying curing dates ( T ) and dosages ( W g ) conditions. Characterization through XRD, SEM, and EDS identified the primary products formed within the stabilized MSC matrix with CF–1 as comprising calcium–silicate–hydrate (C–S–H) gel, calcium–aluminate–hydrate (C–A–H) gel, and a minor amount of calcite. As T and W g increased, the reduction in pores between soil particles enhanced the structural integrity and macro–strength of the cured MSC. The failure pattern of CF–1–solidified MSC elementary samples depended on the CF–1 dosage and curing duration. The solidification mechanism of CF–1 on MSC involved pozzolanic, ion exchange, and carbonation reactions. CF–1 solidified MSC satisfied all the specified requirements for roadbed filler in the relevant code, demonstrating substantial potential for in–situ solidification projects involving MSC.

Experimental Study on Dynamic Resilient Modulus of Subgrade with Circulating Fluidized Bed Combustion Ash As Filler

Experimental research on long-term dynamic characteristics of unsaturated road base and subbase mixtures

Mechanical Properties and Numerical Analyses of Basalt Fiber Crumb Rubber Mortars in Soft Rock Roadways

Experimental study on the stabilization of marine soft clay as subgrade filler using binary blending of calcium carbide residue and fly ash

Experimental Investigation into the Shakedown State of Unsaturated Road Base Aggregate at Various Fine Contents and Matric Suctions

Water Retention Behavior and Shear Strength of Artificially Cemented Granite Residual Soil Subjected to Free Drying

Impact of Cementitious Materials on the Resilient Modulus and Damping Ratio of Weak Subgrade

Resilient and permanent deformation behaviors of construction and demolition wastes in unbound pavement base and subbase applications

Influence of Matric Suction on the Long-Term Behavior of Fouled Road Base Materials Under Traffic Loading

Study on Performance Tests and the Application of Construction Waste as Subgrade Backfill

Enhancing Dynamic Shear Resistance and Efficient Micro-Void Reduction of Expansive Soil Using Activated Nano-Desilicated Fly Ash

Study on the Permanent Deformation and Dynamic Stress–Strain of Coarse-Grained Subgrade Filler under Cyclic Loading

Characterising the resilient behaviour of pavement subgrade with construction and demolition waste under Freeze–Thaw cycles

Effect of Binary Blended Fillers on the Durability Performance of Recycled Cold-Mix Asphalt

Experimental Study on Consolidation-Creep Behavior of Subgrade Modified Soil in Seasonally Frozen Areas

Functional and structural assessment of an experimental section gap graded modified with sugarcane bagasse ash

Experimental Study on the Dynamic Modulus of an Asphalt Roadbed Grouting Mixture under the Influence of Complex and Multiple Factors

Comparative Analysis of Using Laboratory Testing and Nondestructive Testing to Obtain Subgrade Resilient Moduli

Mechanical and microstructural properties of silt roadbed filling improved with cement, red mud and desulfurization gypsum

Strength characterisation of fiber reinforced expansive subgrade soil stabilized with alkali activated binder

Quantitative assessment and mechanism analysis of modification approaches for cold recycled mixtures with asphalt emulsion