Abstract:In recent years, humanity has experienced the effects of using unsustainable energy sources that pollute the environment while being inefficient. Most of the primary energy input used in energy conversion processes is lost in the form of heat. Thermoelectric generators (TEGs) have the potential to recover some of this wasted heat; however, their low energy conversion efficiency needs to be addressed. Previous literature has shown effective optimization of thermoelectric generation systems through statistical tools such as the Taguchi method that optimized all the parameters that affect the outcome of the system. To this date, no research has considered wind speed for convection heat transfer as one of the optimizable parameters. This study aims to optimize the operating conditions of commercially available TEGs that are cooled by forced convection simulating naturally occurring wind speeds and operate under low-quality waste heat temperatures to improve the TEG performance further. Two commercially available TEGs are optimized via the Taguchi method. The Taguchi method is implemented with three parameters and three levels, making an L 9 orthogonal array. The objective function is the maximum output power. The optimized parameters are the hot side temperature, the heat sink size, and the wind airspeed. Analysis of variance (ANOVA) is used alongside the Taguchi orthogonal array for the statistical analysis of the results. The optimization results show that the hot side temperature is the most influential parameter to the output power. In addition, the change in the heat sink size also significantly influences the output power, whereas the impact of the wind speed is not as significant. In addition, interaction analysis between the parameters is performed. The Taguchi method yields satisfactory optimization results. The optimized system yields 0.65 W of power at 140 °C hot side temperature, Model K402 heat sink, and 3.7 m·s −1 wind speed. The influence of the air velocity of 1.73% is minimal on the output power compared to the hot side temperature, with a level of influence of 75.67% and a heat sink size of 22.43% for the shorter module. The results also show that the TEG with a smaller TE leg height yields the best output power at low load resistance ranging from 0.2 Ω to 2 Ω, as the TEG with a taller TE leg renders better performance at higher load resistance ranging from 3 Ω to 16 Ω at the optimal conditions. The results show that the hot side temperature remains the most important parameter in the optimization process. Furthermore, convection cooling from naturally occurring winds has a minimal but positive effect on the output of the presented TEG system.

Intelligent Design and Tuning Method for Embedded Thermoelectric Cooler (TEC) in 3-D Integrated Microsystems

Design Optimization of Thermoelectric Cooling Systems for Applications in Electronic Devices

Optimization of heat sink of thermoelectric cooler using entropy generation analysis

Experimental Study and Taguchi Analysis on LED Cooling by Thermoelectric Cooler Integrated with Microchannel Heat Sink

A system level optimization of on-chip thermoelectric cooling via Taguchi-Grey method

Thermal management of a flexible controlled thermoelectric energy conversion-utilization system using a multi-objective optimization

Dynamic Thermal Management for 3-D ICs with Time-Dependent Power Map Using Microchannel Cooling and Machine Learning

Performance enhancement of a novel thermoelectric self-cooling system for electronic devices

Machine Learning for 3D-IC Electric-Thermal Simulation and Management

Machine Learning-Assisted Thermoelectric Cooling for On-Demand Multi-Hotspot Thermal Management

Efficient Thermoelectric Cooler for Localized Cooling in Electronic Devices

Real-time optimization of thermoelectric coolers' performance based on energy and exergy analysis

Thermoelectric Coolers for Hotspot Thermal Management of 3D Stacked Chips

Intelligent Codesign Strategy for Thermal Management and Cost Control of 3-D Integrated System With TTSV

Numerical Analysis and Design of Thermal Management System for Lithium Ion Battery Pack Using Thermoelectric Coolers

Performance optimization of the transient thermoelectric cooling for the temperature control of the chip working under dynamic power

Investigation of the impact of the thermoelectric geometry on the cooling performance and thermal—mechanic characteristics in a thermoelectric cooler

Taguchi optimization and analysis of variance for thermoelectric generators with forced convection air cooling

Enhancing the cooling performance of thermocouples: a power-constrained topology optimization procedure

Simultaneous optimization of cooling temperature difference and efficiency for multi-stage thermoelectric device

Thermo-mechanical optimization of thermoelectric generators using deep learning artificial intelligence algorithms fed with verified finite element simulation data