Abstract:Advances in Structural Engineering, Ahead of Print. Because of the excellent tensile and compressive strength and durability of ultra-high-performance concrete (UHPC), a precast UHPC tube filled with normal concrete (NC) (abbreviated as NFUT) has been proposed to accelerate structure construction, reduce maintenance cost, and enhance the bearing capacity. However, the long-term deformation of the NFUT composite column has been rarely studied. To numerically analyze the long-term deformation of the new NFUT composite column due to concrete creep and shrinkage, the individual creep and shrinkage models for the NC column and the precast UHPC tube are needed. The objective of the present research was to conduct the shrinkage and creep tests and determine the creep and shrinkage models for the NFUT structure, fitting the existing models in different codes and standards with collected test data. Results showed that the B3 model effectively simulates the creep and shrinkage of the NC column, and the modified ACI209 model is suited for the creep of the precast UHPC tube. Moreover, a finite element model (FEM) of an actual bridge using the NFUT composite piers is established to verify the proposed models and highlight the structure's advantages. Through the FEM result comparison between the full NC and NFUT composite piers, the maximal vertical deformation of the pier top is reduced by 56.6%, and the average NC stress at the pier bottom is reduced by 19.9% due to the 10-year shrinkage and creep in the composite piers. The NFUT piers significantly reduce the midspan vertical deformation and side-span rotations around the transverse direction, while its effect on the key cross-sectional normal stresses of the main girder is small.

Creep and Shrinkage Monitoring and Modelling of CFST Columns in a Super High-Rise Under-Construction Building

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

In-situ measurements of temperature and strain fields of large-diameter concrete-filled steel tube columns and the refined finite element modeling

Time-dependent Behaviour of Expansive Concrete-Filled Steel Tubular Columns

EXPERIMENTAL STUDY ON THE CREEP EFFECT OF THE EXPANSIVE AGENT AND RECYCLED CFST COLUMN IN CONSTRUCTION

Behavior and Design of Slender Concrete-Filled Wide Rectangular Steel Tubular Columns under Axial Compression

The Study on Early-Age Expansion and Shrinkage Model of Massive Self-Compacting Concrete Pumped in Steel Tube Column

The influence of steel reinforcement on creep and shrinkage of concrete columns

Global Buckling Behavior of CFST Columns with Assembling Errors

Effect of Concrete Age and Creep on the Behavior of Concrete-Filled Steel Tube Columns

Global Stability Performance of Multi-Cellular T-Shaped CFST Slender Columns under Eccentric Compression

Normal concrete and ultra-high-performance concrete shrinkage and creep models: Development and Application

Theoretical Investigation of Creep in Concrete Filled Steel Tube Columns under Long-Term Load

Simulation and Deformation Analysis of Construction Process of Large Eccentric Frame‐Core Tube Structure

Numerical studies on creep behaviour of SRCFST columns with initial stress of steel tube

Concrete Shrinkage and Creep in Recycled Aggregate Concrete-Filled Steel Tubes

Proposal of a Creep-Experiment Method and Superficial Creep Coefficient Model of CFT Considering a Stress-Redistribution Effect

Measurement and Modeling of Creep Property of High-Strength Concrete Considering Stress Relaxation Effect

Time-dependent Behaviour of Concrete-Filled Steel Tubular Columns: Analytical and Comparative Study

Behavior of concrete-filled double skin (CHS outer and CHS inner) steel tubular columns subjected to long-term sustained loads

Behaviour of Concrete-Encased CFST Stub Columns Subjected to Long-Term Sustained Loading