Abstract:In order to combine the anti-friction performance of micro-texture with the lubrication effect of solid self-lubricating phase, and further improve the tribological performance of the coating under dry friction conditions. Fe 5 /10%WC/5% MoS 2 self-lubricating coating was prepared by laser cladding technology, and then elliptical micro-textures with different arrangement angles (0°, 45°, 90°) were processed on the surface of the coating by laser micro-texture technology. The friction and wear behavior of the micro-texture coating was investigated from the perspectives of friction coefficient, volume wear loss, and wear morphology. The improvement effect of micro-texture on the wear resistance of the coating was discussed, and the synergistic anti-friction mechanism of the self-lubricating coating and surface micro-texture was explored. The results show that the friction coefficient and volume loss of the 0° textured coating are the smallest under the external load of 70 N, and the wear mechanism is characterized by slight abrasive wear. The 45° textured coating exhibits local adhesive traces in addition to a few micro-cutting furrows, suggesting a combination of slight abrasive wear and adhesive wear. The friction coefficient and volume loss of the 90° textured coating are the largest and the volume loss is greater than that of the non-textured coating. The wear mechanism is dominated by fatigue wear, accompanied by slight abrasive wear and adhesive wear. During the friction and wear process, the elliptical micro-pits can promptly capture wear debris, reducing the continuous damage to the coating. Additionally, the solid lubricant (MoS 2 ) stored in the micro-pits can provide continuous lubrication to the friction contact area and effectively decrease the friction coefficient.

Effect of Laser-Induced Texture on Lubrication Retention and Tribological Properties of 40cr Alloy Surfaces

Synergistic effect of surface sinusoidal textures and oxide layer on tribological properties of 40Cr alloy steel

Effect of laser preparation strategy on surface wettability and tribological properties under starved lubrication

Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact

Combined Effect of a Laser Cladded Coating and Surface Texture on Tribological Performance Under Dry Sliding and Starved Lubrication

Influence of Oil Viscosity on the Tribological Behavior of a Laser-Textured Ti6Al4V Alloy

The Effect of Laser Texturing of Steel Surfaces on Film Lubriction Based on Stribeck Curves

Evaluation of tribological performance for laser textured surfaces with diverse wettabilities under water/oil lubrication environments

Additional Tribological Effect of Laser Surface Texturing and Diamond-Like Carbon Coating for Medium Carbon Steel at Near Room Temperature

Laser Melting and Surface Texture Technology: Effect on Friction Properties

Wettability transition and tribological properties of hydrophobic alloy surfaces prepared by one-step method

Influence of Micro-Texture on the Tribological Behavior of WC/MoS2/Fe-Based Alloy Coating by Laser Cladding

Effect of ion beam etching on the tribological performance of laser textured Co-Cr-Mo alloy

Effect of Nanosecond Laser Texturization on Tribological Behavior of AISI 321 Stainless Steel

Effect of Laser-Textured Surface of Ti6Al4V on Frictional Wear Behavior

Does laser surface texturing really have a negative impact on the fatigue lifetime of mechanical components?

Ultra-low wear of titanium alloy surface under lubricated conditions achieved by laser texturing and simultaneous nitriding

LASER SURFACE TEXTURING TO IMPROVE THE TRIBOLOGICAL PROPERTIES OF Ti ALLOYS

Improving tribological properties of Ti–Zr alloys under starved lubrication by combining thermal oxidation and laser surface texturing

Growth characteristics and wear properties of micro-arc oxidation coating on Ti-6Al-4V with different laser texture shapes

Preparation of Superhydrophobic 35CrMo Surface and Its Tribological Properties in Water Lubrication