Design of a Series of Inverse Continuous Modes Power Amplifier Based on Bandpass Filter
Kun Wang,Zhiqun Cheng,Minshi Jia,Zheming Zhu,Baoquan Zhong,Zhenghao Yang,Bingxin Li
DOI: https://doi.org/10.1002/cta.4330
IF: 2.378
2024-10-31
International Journal of Circuit Theory and Applications
Abstract:This article proposes a novel power amplifier structure. Firstly, a high‐performance BPF was designed and analyzed. Secondly, in order to meet the requirements of broadband and high efficiency, SICM was adopted. Finally, through verification, the drain efficiency measured at 2.2–2.9 GHz was 61.6%–73.7%. The size is 11.2 × 3.5 cm2, which has achieved good results in terms of bandwidth, efficiency, and size. In this paper, a broadband high‐efficiency power amplifier (PA) with filtering characteristics is proposed. This PA is designed using a series of inverse continuous modes (SICMs) and adds a novel coupled microstrip line filter structure. The terminal of this structure is composed of microstrip lines cascaded to improve the out‐of‐band suppression effect. This filter can achieve low in‐band insertion loss, high passband selectivity, as well as deep stopband rejection performance simultaneously. A PA was designed and implemented using a 10 W GaN HEMT device, verifying its wideband characteristics. The measurement result shows that the 39.6–41.6 dBm output power (Pout), 61.6%–73.7% drain efficiency (DE), and 8.6–10.8 dB gain are achieved at 2.2–2.9 GHz.
engineering, electrical & electronic