Full 4π Emission Data Collection and Reconstruction for Small Animal PET Imaging

Hongdi Li,H. Baghaei,Shitao Liu,Rocio Ramirez,Shaohui An,Chao Wang,Wai‐Hoi Wong
DOI: https://doi.org/10.1109/nssmic.2011.6152506
2011-01-01
Abstract:Most of the current animal PET detector systems are cylindrical or similar multi-sided polygonal geometries with limited axial field of view. The object is placed near the center of the detector ring during the emission data collection. The signal that can be detected has a limited angular range; the paraxial signal cannot be detected. Moreover, the sensitivity for the objects positioned at different locations inside the FOV is different. The central part of the FOV has higher sensitivity than that near the end along the axis. The lack of paraxial detectability which means non-uniform sampling, along with the non-uniform sensitivity of a PET system, will affect the uniformity of the overall image quality. Also, currently widely used PET data processing and reconstruction algorithms are sinogram based, which usually uses different sizes for the voxel in axial and transaxial directions. Because of these non-uniformities, the resolution and quality of current PET image are anisotropic. In order to achieve isotropic results, the emissions from the object must be collected in full 4π space and reconstructed accordingly. Here we propose a full 4π emission data collection method, which involving the rotation of the object during the emission collection in a plane parallel to the detector ring axis. The full 4π emission data are then reconstructed and processed to generate the 3D image set with cubic voxel, uniform resolution and signal-to-noise ratio in all directions and locations. Both Monte Carlo simulations and experiments are carried out with simulated and real mouse phantoms. Emission data in both 4π and conventional modes are collected and then processed. Point source is used in the experiment as the fiducial mark. Our results show that with full 4π collection method, the image qualities are substantially improved in several aspects such as the axial distortions and the uniformity of the SNR. Moreover, the axial strip-like artifacts in the conventional mode are canceled in the full 4π mode, therefore less smooth window is needed during the reconstruction which led to higher resolution.
What problem does this paper attempt to address?