Abstract:The three welding modes of laser positioning, trajectory fitting and real-time tracking are key links for flexible robotic welding, because they directly affect the adaptability of welding robots for complex structural parts. Nevertheless, there are few studies on the integration of laser positioning, trajectory fitting and real-time tracking welding. Aiming at the drawback of that the robot cannot efficiently match the corresponding welding process between different working conditions such as short seam, spatial curve seam and long seam welding, a control scheme that can integrate the above three welding modes is proposed in this paper. First, the welding requirements of laser positioning, trajectory fitting and real-time tracking are transformed into a unified 3D coordinate recognition task for integrated welding, so the identification of welding points under three different processes can be obtained through an identical inference. The next, given the fast inference speed of YOLOv5, a joint ROI extraction algorithm with YOLOv5 as the core is applied. To compensate for YOLOv5′s inability to directly locate seam centers, iterative centerline unbiased detector (ICUD) and adaptive feature extraction algorithm (AFEA) are proposed without the need for complex image pre-processing and with very strong immunity to strong exposure and strong arc spatter. Finally, teaching trajectory correction model, B-spline curve fitting model, and 3D coordinate real-time tracking model are presented to enhance the adaptability of the welding robot and to flexibly match the appropriate welding mode in various working conditions. Experimental results indicate that the welding trajectory is basically consistent with the seam centerline when laser positioning and trajectory fitting welding. In real-time tracking welding, the real-time deviation is mainly controlled within the range of ± 0.2 mm, and the average error is 0.1160 mm.

A Creative Design of Robotic Visual Tracking System in Tailed Welded Blanks Based on TRIZ

Intelligent Control System Of Trajectory Planning For A Welding Robot

A Tracking Innovation Method Based on Product Configuration Diagram

Seam Tracking of Articulated Robot for Laser Welding Based on Visual Feedback Control

A Feature Matching Algorithm Applied to Welding Trajectory Revising

Intelligent Perception and Seam Tracking System for Thick Plate Weldments Based on Constant-Focus Optical Path

Research on Trajectory Recognition and Control Technology of Real-Time Tracking Welding

Application of systematic design approach based on theory of inventive problem solving

Multiseam tracking with a portable robotic welding system in unstructured environments

A Novel 3D Complex Welding Seam Tracking Method in Symmetrical Robotic MAG Welding Process Using a Laser Vision Sensing

Motion navigation for arc welding robots based on feature mapping in a simulation environment

Versatile robotic welding system integrating laser positioning, trajectory fitting and real-time tracking

A Novel Seam Tracking Technique with a Four-Step Method and Experimental Investigation of Robotic Welding Oriented to Complex Welding Seam

3-D Vision-Based Trajectory Tracking of Welding Robots

Autonomous mobile welding robot for discontinuous weld seam recognition and tracking

A Vision Based Detection Method For Narrow Butt Joints And A Robotic Seam Tracking System

Seam tracking system based on laser vision and CGAN for robotic multi-layer and multi-pass MAG welding

The System Design Of An Autonomous Mobile Welding Robot

Welding seam recognition and tracking for a novel mobile welding robot based on multi-layer sensing strategy

CCD Sensor Assisted Weld Seam Tracing Method for Spherical Tank Welding Robot

Research on visual technology of trajectory tracking for robotic welding