Abstract:The seam tracking operation is essential for extracting welding seam characteristics which can instruct the motion of a welding robot along the welding seam path. The chief tasks for seam tracking would be divided into three partitions. First, starting and ending points detection, then, weld edge detection, followed by joint width measurement, and, lastly, welding path position determination with respect to welding robot co-ordinate frame. A novel seam tracking technique with a four-step method is introduced. A laser sensor is used to scan grooves to obtain profile data, and the data are processed by a filtering algorithm to smooth the noise. The second derivative algorithm is proposed to initially position the feature points, and then linear fitting is performed to achieve precise positioning. The groove data are transformed into the robot’s welding path through sensor pose calibration, which could realize real-time seam tracking. Experimental demonstration was carried out to verify the tracking effect of both straight and curved welding seams. Results show that the average deviations in the X direction are about 0.628 mm and 0.736 mm during the initial positioning of feature points. After precise positioning, the average deviations are reduced to 0.387 mm and 0.429 mm. These promising results show that the tracking errors are decreased by up to 38.38% and 41.71%, respectively. Moreover, the average deviations in both X and Z direction of both straight and curved welding seams are no more than 0.5 mm, after precise positioning. Therefore, the proposed seam tracking method with four steps is feasible and effective, and provides a reference for future seam tracking research.

Research on visual technology of trajectory tracking for robotic welding

Research on Trajectory Recognition and Control Technology of Real-Time Tracking Welding

3-D Vision-Based Trajectory Tracking of Welding Robots

Welding Seam Tracking in Robotic Gas Metal Arc Welding

Autonomous Seam Acquisition and Tracking for Robotic Welding Based on Passive Vision

An Adaptive Feature Extraction Algorithm for Multiple Typical Seam Tracking Based on Vision Sensor in Robotic Arc Welding

Real-Time Seam Tracking Technology of Welding Robot with Visual Sensing

A vision-based method for narrow weld trajectory recognition of arc welding robots

A Visual Sensing Robotic Seam Tracking System

Seam Tracking of Articulated Robot for Laser Welding Based on Visual Feedback Control

A Vision Based Detection Method For Narrow Butt Joints And A Robotic Seam Tracking System

Visual sensing method based on texture analysis for automatic seam tracking systems

Seam-tracking based on dynamic trajectory planning for a mobile welding robot

Real-time seam tracking control technology during welding robot GTAW process based on passive vision sensor

A visual seam tracking system for robotic arc welding

Research on the Real-time Tracking Information of Three-dimension Welding Seam in Robotic GTAW Process Based on Composite Sensor Technology.

Welding seam recognition and tracking for a novel mobile welding robot based on multi-layer sensing strategy

A Novel Seam Tracking Technique with a Four-Step Method and Experimental Investigation of Robotic Welding Oriented to Complex Welding Seam

Study On Welded Seam Recognition Using Circular Laser Vision Sensor

The active visual sensing methods for robotic welding: review, tutorial and prospect

Autonomous Welding Seam Detecting and Tracking Using Vision and Sound Sensors in Robotic Gas Metal Arc Welding