Abstract:For the efficient and effective detection in automatic non-destructive testing (NDT) of weld defects, the NDT probe must stay aligned with the welds. It is essential to detect the deviation between the seam and the probe by means of weld recognition, in order to adjust the relative position between the workpiece and the probe. The traditional weld recognition method is suitable for real-time seam tracking when the geometric feature of the groove is distinct; however, it may fail when applied to the formed weld recognition. Other methods proposed by researchers are unsatisfactory in the signal-to-noise ratio of imaging, separation degree of visual features and efficiency of the processing algorithm. To solve these problems, this paper proposes a novel visual weld recognition method using two directional lights. The directional lights are projected onto the edges of the seam to produce the distinct man-made “light and shadow” (LS) features. In this paper, we first study the principles and sensing requirements of the LS features; then a stroboscopic circuit is established to lighten the two directional lights alternatively and meanwhile synchronizes the camera to capture images when each light is on. Afterwards, we propose an image processing algorithm based on thresholding and edge extraction to calculate the accurate edges of the seam. Finally, a weld detection platform is established and experiments on weld recognition and deviation correction are conducted. The experiment results show that the proposed detection method can recognize the edges of the seam effectively in 0.023mm accuracy. The time cost of the image processing algorithm is not more than 13ms. The proposed method is suitable for weld detection where the reinforcements of the seams are as low as 1mm. It expected to be applied to the automatic vision-guided NDT of weld defects.

Application of Fuzzy Edge Detection in Weld Seam Tracking System

Real-time Image Processing for Vision-Based Weld Seam Tracking in Robotic GMAW

Edge detection and its application to recognition of arc weld image

Weld Seam Recognition Based On CCD Image Processing

Real-time seam tracking control technology during welding robot GTAW process based on passive vision sensor

Weld Seam Edge Detection Based on Composite Edge Detectors

Seam recognition with computer vision and its application

Study on image processing algorithms for seam tracking based on vision sensor

Real-time image processing for seam tracking control in robotic welding

The Design of Automatic Seam Tracking System Based on Image Sensing

An Adaptive Feature Extraction Algorithm for Multiple Typical Seam Tracking Based on Vision Sensor in Robotic Arc Welding

Welding Seam Tracking in Robotic Gas Metal Arc Welding

Robust welding seam tracking using image seam extraction

Underwater Wet Weld Seam Tracking Based on Passive Visual Sensor

The Seam Tracking System for Submerged Arc Welding

Real-Time Seam Tracking Technology of Welding Robot with Visual Sensing

Passive Vision Based Seam Tracking System for Pulse-Mag Welding

A Visual Weld Edge Recognition Method Based on Light and Shadow Feature Construction Using Directional Lighting

Image Processing Method to Detect Seam Track of Thin Sheets

Real-time Image Capturing and Processing of Seam and Pool During Robotic Welding Process.

Feature point extraction based on contour detection and corner detection for weld seam