Abstract:The transient flow model of a scroll refrigeration compressor which included axial clearance was established in the paper using PUMPLINX based on the computational fluid dynamics and the dynamic grid methodology. According to the actual size in the physical compressor, the flank and the axial clearances were set equal to 0.030 mm and 0.015 mm, respectively. As the fluid domain of the axial clearance was too small to generate enough layers of grids in PUMPLINX, it was first magnified 100 times to generate grids of high quality, and then the fluid domain and grids were recompressed to the original size. The simulation results were verified experimentally. The influence of the radial leakage on the downstream flow field was investigated. Moreover, the characteristics of radial and tangential leakage flows were analyzed. It was concluded that the predictions of the compressor performance, except the discharge temperature, are improved after the axial clearance was included in the model. The radial leakage is dominant while a portion of involute leakage flow exists near the flank clearance. The influence of radial leakage on the downstream temperature is lower than that of the tangential leakage in flank clearance. The tangential leakage flow is turbulent basically while the radial leakage flow is laminar. The tangential leakage is severer at the beginning of the discharge process, and the radial leakage is more remarkable at the end of the compression process. When the pressure ratio across the leakage path is higher than the critical pressure ratio, the tangential leakage flow becomes supersonic for the converging–diverging clearance structure, while the radial leakage flow remains subsonic due to the larger flow losses. The results obtained through this research could be applied to modify the current leakage models and optimize the clearances of scroll compressors.

THREE-DIMENSION NUMERICAL SIMULATION OF DISCHARGE FLOW IN A SCROLL AIR COMPRESSOR

Numerical simulation of internal flow in forward-curved centrifugal fan

Flow Computations of Multi-Stages by URANS and Flux Balanced Mixing Models

Study on Flow Field in Capacity Regulating Actuator for Reciprocating Compressor

Analysis of 3D Transient Flow in a High-Speed Scroll Refrigeration Compressor

Transient flow and thermodynamics analysis of a scroll compressor based on CFD

Unsteady characteristic and flow mechanism of a scroll compressor in small-scale compressed air energy storage system

Unsteady Characteristic and Flow Mechanism of a Scroll Compressor with Novel Discharge Port for Electric Vehicle Air Conditioning

Numerical analysis of the transient leakage flow in axial clearance of a scroll refrigeration compressor

Bleed air CFD modelling in aerodynamic simulation of A heavy duty gas turbine compressor

Analysis of the transient flow in a scroll-type compressor constructed from an algebraic spiral with pressure relief valves

Investigation on the modifications of the suction flow passage in a scroll refrigeration compressor

Thermal Analysis Model of Scroll Compressor with Clearance Leakage Based on Multiple Scale Method

A Computationally Efficient Scroll Compressor Model for Both Single-Phase and Two-Phase Compression Considering Scroll Wrap Temperature Distribution

Thermodynamics and flow unsteadiness analysis of trans-critical CO2 in a scroll compressor for mobile heat pump air-conditioning system

Development of a Throughflow-Based Simulation Tool for Preliminary Compressor Design Considering Blade Geometry in Gas Turbine Engine

An Improved Geometric Theoretical Model and Throughflow Prediction Method for a CO2 Scroll Compressor of Automotive Air Conditioning System

3-D viscous numerical investigation on the overall aerodynamic performance of a transonic axial-flow compressor stage

3-D Numeric Analysis on Flow Field in Submersible Centrifugal Pump with Cylindrical Blades

Numerical and Experimental Study on Flow Loss Reduction Effect of Micro-Textured Surface on Compressor Cascade

Development of A Throughflow Method for Aerodynamic Analysis of Highly Loaded Axial Flow Compressors