Abstract:The differences between the gas gap discharge and surface flashover have not been clarified because of the complexity of the flashover inception process at the solid–gas interface. In this paper, epoxy resin insulators with an adjustable inserted electrode for electric field regulation were employed to investigate the inception and propagation of electrodeless-initiated discharge (ELID) under the standard lightning impulse in SF6, and the differences from the breakdown process of an equal-sized gas gap (electrode-surface-initiated discharge, ESID) are discussed. Both a photomultiplier tube and a high-speed framing camera were used to observe the luminous strength and configuration of the initiation and propagation processes of the discharge. The results show that various luminous pre-signals can be detected before breakdown, indicating different physical processes during discharge. In ESID, the discharge begins with several streamer bursts followed by a step-by-step stem leader propagation and then breaks through the whole gas gap, with a submicrosecond time delay, whereas, in ELID, the streamer bursts are much weaker than those in ESID, and they turn into a bidirectionally propagated leader that breaks through the residual insulation faster, with a much shorter breakdown time delay, which is ≤300 ns. The criterion of streamer inception is also analyzed via the Raether–Meek criterion (K value), which is found to be higher in ELID (545 ± 20) than that in ESID (375 ± 25), which implies a higher requirement of an electric field for streamer inception and discharge initiation from the dielectric surface than that from the electrode surface.

Photoelectrical Measurement of Gap Discharge of Surphur Hexafluoride under Fast Oscillating Voltage

Photoelectric studies on discharge of SF6 in a point/plane gap under fast oscillating impulse voltages

Luminous Characteristics during Discharge over the Spacer Surface in Sulfur Hexafluoride Gas

Mechanism of Discharge Development in Sf6 with and Without Spacers under Fast Oscillating Impulse Condition

Study on Characteristics of Corona Discharge Light Pulse in SF6 Gas at Ultraviolet, Visible and Near-infrared Regions

In-Situ Measurement of Surface Charge of a Positive Pulse Surface Discharge in SF<inf>6</inf>

Discharge Characteristics of SF6 Gas with and Without Insulators under VFTO and Lightning Impulse Voltage

In-situ Measurement of Surface Charge of a Positive Pulse Surface Discharge in SF<sub>6</sub>

Hump Phenomena and Mechanism of SF6 Gas Discharge Under Impulse Voltages

Partial Discharge Characteristics of Floating Potential Defect in SF6 Gas under Oscillating Lightning Impulse Voltage

Ultraviolet Images of 50-Hz AC Discharges in SF6 Atmosphere

Multichannel Discharge Characteristics of Gas Switch Gap in SF 6 -N 2 or SF 6 -Ar Gas Mixtures under Nanosecond Triggering Pulses

Critical Radius Phenomenon and Mechanism for SF6 Gaps under Very Fast Transient and Lightning Impulse Voltages

Partial Discharges in SF6 Gas Filled Void under Standard Oscillating Lightning and Switching Impulses in Uniform and Non-Uniform Background Fields

Characteristics and Development Mechanisms of Partial Discharge in Sf6 Gas under Impulse Voltages

Study on Characteristics of Multi-spectral Pulse Under Corona Discharge in SF6 Gas

Impedance Characteristics of High-frequency Arc in Short SF6 Gap

Partial Discharges in SF6 Gas Filled Void under Standard Aperiodic and Oscillating Switching Impulses

Study On Characteristics Of Corona Discharge Light Pulse In Sf6 Gas At Multi-Spectral Regions

Criteria and Propagation Processes of Electrode-Initiated and Electrodeless-Initiated Discharge in SF6

Detection of Decomposition Products of SF6/air Gas Mixture by Electron Attachment Mass Spectrometry