Abstract:The catalytic conversion of hydrocarbon molecules over an acidic silica-aluminum molecular sieve is the core of the petrochemical and coal chemical industry. Finely controlling the reaction process between catalyst grains for catalytic stability and product selectivity can be achieved by configuring zeolites with different acid properties, but the details continue to be indefinable. Herein, mixed ZSM-5 with different acid configurations was used as the catalytic platform to study the inter-catalytic behavior of the grains using methanol to aromatics as the model reaction. It was found that the obvious multiple reactions of hydrocarbon intermediates occurred between ZSM-5 grains. The typical C3–C5 hydrocarbons produced from Zn-free ZSM-5 with a low SiO2/Al2O3 ratio could be aromatized on adjacent Zn60 grains. Although the external coke deposition of Zn-free ZSM-5 grains was promoted due to the secondary conversion of returned aromatics, the dealkylation reaction was enhanced on external strong acid sites, which significantly increased the light aromatic selectivity. Decreasing the SiO2/Al2O3 ratio of Zn-free ZSM-5 to 120 could significantly promote the heavy aromatic de-alkylation and inhibited external coke deposition due to the sufficient external strong acid sites. The lifetime of such a mixed catalyst was prolonged nearly 3 times than that of the previously reported olefin-aromatic doubled catalytic system, and the heavy aromatic selectivity was reduced by 30%. This work helps to clarify the catalytic behavior of acidic molecular sieve catalysts in the hydrocarbon conversion reaction and provides an effective path to improve the catalytic performance by configurating different molecular sieve catalysts.

Step-change performance enhancement of ethylene aromatization on Ga-ZSM-5 through steaming treatment

Influence of steam treatment on ZSM-5 catalyst and MTP reaction

Acidity Modification of ZSM-5 for Methane Conversion in Co-feeding Method with MTA Reaction

Effective factors on performance of zeolite based metal catalysts in light hydrocarbon aromatization

Steamed Zn/ZSM-5 catalysts for improved methanol aromatization with high stability

Effects of Steam Treatment on Acidity of Zsm-5 and Its Catalytic Performance in Butene Cracking

Coupling CO2 Reduction with Ethane Aromatization for Enhancing Catalytic Stability of Iron-Modified ZSM-5

Effects of post treatment of HZSM-5 zeolites on catalytic cracking of butene

Effect of Steam Treatment on the Catalytic Performance of ZSM-5 in the Co-conversion of Methanol and N-Hexane to Aromatics

The migration of Zn species on Zn/ZSM-5 catalyst during the process of ethylene aromatization

An Effective Catalyst for Syngas-To-Dimethyl Ether Process with Steamed Zeolite Hmcm-49 As Dehydration Component

Improved ethane conversion to ethylene and aromatics over a Zn/ZSM-5 and CaMnO3-δ composite catalyst

Study on Aromatization of Ethylene on Zn/ZSM-5 Zeolite Catalyst

Optimization and modification of ZSM-5 zeolite for efficient catalytic cracking of 1,2-dichloroethane

Improving the Hydrothermal Stability of ZSM-5 Zeolites in 1-Octene Aromatization by Sequential Alkali Treatment and Phosphorus Modification

An Effective Method to Enhance the Stability On-Stream of Butene Aromatization: Post-Treatment of Zsm-5 by Alkali Solution of Sodium Hydroxide

Dealumination and Desilication for Al-rich HZSM-5 Zeolite Via Steam-Alkaline Treatment and Its Application in Methanol Aromatization

Relay and Feedback Conversion Effect of Hydrocarbons between ZSM-5 Grains on Product Selectivity and Coke Formation during Methanol Aromatization

Effect of steam and CO2 on ethane activation over Zn-ZSM-5

Structure Evolution of Zn Species on Fresh, Deactivated, and Regenerated Zn/ZSM-5 Catalysts in Ethylene Aromatization

Effect of Steaming on Waste‐derived Zeolite ZSM‐5 as Methanol‐To‐Hydrocarbons Catalyst