Abstract:Purpose Two corrosion inhibitors for closed cooling water systems, nitrite-based and mixture of nitrite and molybdate corrosion inhibitor, are often compared to each other. This study aims to optimize these two inhibitors in terms of concentration and pH for carbon steel protection, with insights into the double layer structure on surface and its impact on corrosion inhibition. Design/methodology/approach Electrochemical analysis including electrochemical impedance spectroscopy and potentiodynamic test are carried out for quick assessment of corrosion inhibition efficiency and optimization, which is confirmed by immersion test and microscopic analysis. The electronic properties of the surface film are analyzed through Mott–Schottky method which provides new insights into the inhibition mechanism and the role of each component in mixture inhibitor. Findings Mixture of nitrite and molybdate is shown to present higher inhibition efficiency, owning to the double layer structure. Nitrite alone can form a protective surface film, whereas molybdate leads to an n-type semiconductive film with lower donor density, hence giving rise to a better inhibition effect. Research limitations/implications Surface after inhibitor treatment has been carefully characterized to the microscopic scale, implying the effect of micro-structure, chemical composition and electronic properties on the corrosion resistance. Inorganic corrosion inhibitors can be tuned to provide higher efficiency by careful design of surface film structure and composition. Originality/value Almost every study on corrosion inhibitor applies such method for quick assessment of corrosion inhibition effect. Mott–Schottky test is one of electrochemical methods that reveals the electronic properties of the surface film. Previous works have studied the surface layer mainly through X-ray photoelectron spectroscopy. This study provides another insight into the surface film treated by nitrite and molybdate through Mott–Schottky analysis, and relates this structure to the corrosion inhibition effect based on multiple analysis including electrochemistry, microscopic characterization, thermodynamics and interface chemistry.

Study on Inhibitive Mechanisms of Molybdate Used in Combination with Phosphate in Neutral Environments

INHIBITION BEHAVIOR OF MOLYBDATE INHIBITORS FOR CARBON STEEL IN SEA WATER

Effect and Applicability of Different Phosphates on Inhibiting Iron Release in Water Distribution System

Synergistic inhibition of molybdate and phytate on chloride-induced corrosion of carbon steel in simulated concrete pore solutions

Study on the Sodium Molybdate- BTA Inhibitor for Carbon Steel in Sea- Water Environment

The Synergistic Inhibitions of Tungstate and Molybdate Anions on Pitting Corrosion Initiation for Q235 Carbon Steel in Chloride Solution

Study on Synergistic Corrosion Inhibition Effect between Calcium Lignosulfonate (CLS) and Inorganic Inhibitors on Q235 Carbon Steel in Alkaline Environment with Cl−

Inhibitive Effect of Sodium Molybdate on the Corrosion Behavior of Galvanized Steel in Simulated Concrete Pore Solution

The synergistic effect of sodium phytate and benzotriazole as corrosion inhibitors of 20SiMn steel in 3.5 wt-% NaCl solution

Optimization and understanding of corrosion inhibitors for cooling water system

Preparation of Composite Molybdate/Phosphate Conversion Coating on Mg Alloys

Effect of Sodium Molybdate on Electrochemical Behavior of Phosphating Coatings on Hot-Dip Galvanized Steel Sheet

The effect of inhibiting molybdate used in anodizing-conversion treatment to improve corrosion protection of AA2030 aluminum alloy in different steps

Effect of phosphate nature on the inhibitory capability of phosphate compositions

SYNERGISTIC EFFECT OF CORROSION INHIBITION ON BRONZE BY BENZOTRIAZOLE AND SODIUM MOLYBDATE

Tribological mechanisms of the synergistic effect between sulfur- and phosphorus-free organic molybdenum and ZDDP

Enhancing steel corrosion resistance in 1.0 M HCl medium through the synthesized and characterized mixed pyrophosphates BMnP 2 O 7 (B = Ni, Co, and Cd)

Positive effects of molybdenum on the biomineralization process on the surface of low-alloy steel catalyzed by Bacillus subtilis

Synergistic effect of 1-(2,5-dioxoimidazolidin-4-yl)urea and Tween-80 towards the corrosion mitigation of mild steel in HCl

Synergistic Inhibition Properties and Microstructures of Self-Assembled Imidazoline and Phosphate Ester Mixture for Carbon Steel Corrosion in the CO2 Brine Solution

Experimental and theoretical investigations on synergistic effect of surfactants as corrosion inhibitor on steel in acid medium