Heat transfer characteristics of enhanced cooling tube with a helical wire under oscillatory flow in Stirling engine
Feng Xin,Minjie Yu,Wei Liu,Zhichun Liu
DOI: https://doi.org/10.1016/j.ijthermalsci.2021.107063
IF: 4.779
2021-10-01
International Journal of Thermal Sciences
Abstract:<p>Improving the heat transfer of cooler is favourable to reduce the cold end temperature and dead volume of Stirling engine. In this study, the effect of the implementation of a helical wire to a cooling tube of the reciprocating flow in Stirling engine was investigated numerically. The performance of helical wire with different geometric parameters and under different operating conditions were studied. The results show that the streamlines were helical and the fluid temperature homogeneity was improved. With the same size, the temperature drop of enhanced tube was 1.08–1.54 times as much as that of smooth tube. When obtaining the same outlet temperature, the diameter of smooth tube was 52% of that of enhanced tube with same tube length (for <em>p</em> = 12.5 mm, <em>h</em> = 1.2 mm, <em>d</em><sub>0</sub> = 1.6 mm, <em>l</em> = 180 mm, <em>Re</em><sub>max</sub> = 13,816, <em>Re</em><sub>ω</sub> = 207). Thus, the amount of smooth tube needed to increase to 3.7 times as much as that of enhanced tube. In another case (for <em>p</em> = 12.5 mm, <em>h</em> = 1.2 mm, <em>d</em><sub>0</sub> = 1.6 mm, <em>d</em> = 5 mm, <em>Re</em><sub>max</sub> = 13,816, <em>Re</em><sub>ω</sub> = 207), the length of smooth tube should be increased to above 2 times as much as that of enhanced tube with same tube diameter. Therefore, the tube with a helical wire could significantly enhance the heat transfer or decrease the size of cooler. Compared to smooth tube, the extra pressure drop by enhanced tube was accounts for no more than 0.6% of minimum pressure in Stirling engine (for <em>Re</em><sub>max</sub> = 13,816, <em>Re</em><sub>ω</sub> = 207). It only accounted for 9.6–13.1% of the pressure drop of a regenerator. Therefore, the enhanced cooling tube with remarkable heat dissipation capacity and relatively low loss of pressure drop will present great application potential in Stirling engine.</p>
engineering, mechanical,thermodynamics