Abstract:With the increasing demand of the electricity, an efficiency improvement and thereby a reduced CO2 emission of the coal-fired plants are expected in order to reach the goal of the Kyoto protocol. In the medium term, increase of thermal efficiency of the steam cycle can be achieved by a rise of the process parameters. Currently, live steam pressures and temperatures up to 300 bar and 923 K are planned as a next step. This means an increase of 50-100 K in comparison to plants presently under operation. Such a large increase will only be possible, if all thermally high loaded components of the plant are made of new materials and/or new technologies for cooling and thermal insulation are applied.Closed circuit steam cooling of blades and vanes in modern steam turbines is a promising technology in order to establish elevated live steam temperatures in future steam turbine cycles. Due to the cooling of the components, materials can be used, which are common in todays application. In this paper, a steam-cooled test vane in a cascade with external hot steam flow is analysed numerically by applying a Conjugate Calculation Technique. The boundary conditions of the hot steam are derived from the planned inlet parameter of the HP steam turbine in a medium term and a long term in order to show the application potential of such a cooling technique. The supply steam parameters of the cooling are set equal to those of the outlet steam from the HP steam turbine.The results show that the steam cooling technique can reach necessary cooling effectiveness in the steam turbine by using only minor amounts of cooling steam. The internal pan of the vane is cooled homogeneously in both investigated cases. Basic features and phenomena of the steam cooling technique in steam turbines are discussed in the paper with respect to future application. It has been found that the trailing edge region of the steam-cooled vane is less critical with respect to high thermal load than in gas turbine application with the same configuration. At the leading edge of the vane, high thermal load can be detected because of the direct impingement of the hot steam. Improvement of the leading edge cooling is recommended by increasing cooling steam amount for the leading edge channel. Thus, a larger diameter of the channel can increase internal cooling efficiency for the leading edge. Due to the different heat transfer characteristics on the suction side and pressure side, the suction side shows also a higher temperature distribution in the investigated cases.

Comparative study of flow characteristics between carbon dioxide and steam in cascade passage

Comparative Assessment of Aerodynamic Losses in Turbine Stages with Supercritical Carbon Dioxide and Steam

Performance and Loss Analysis of a Small-Scale Supercritical CO2 Turbine

Numerical Study of the Secondary Flow in Steam Turbine Static Cascade under Varying Conditions

Investigation of the Steam-Cooled Blade in a Steam Turbine Cascade

Comparative Experimental Investigation On Aerodynamic Performance Of A Steam Turbine Cascades, Part Ii - Stator Vanes

Numerical Investigation on the Effects of Gap Circulating Flow on Blower Performance under Design and Off-Design Conditions

Flow loss mechanisms investigation on a novel corotating scroll expander for supercritical carbon dioxide power system

Throttling Components Effect on Aerodynamic Performance of Superheated Steam Flow in Multi-Stage High Pressure Reducing Valve

Aerodynamics Analysis of Superheated Steam Flow Through Multi-Stage Perforated Plates

Shock waves characteristics and losses estimation of non-equilibrium condensation flow in nozzle and steam turbine cascade

Vortex Patterns Investigation and Enstrophy Analysis in a Small Scale S-CO2 Axial Turbine

Cooling Performance Of The Steam-Cooled Vane In A Steam Turbine Cascade

Study on the Casing Recess Design Method for a Supercritical Carbon Dioxide Axial Turbine

Numerical Study on Rotor Cooling of Turbine in Supercritical Carbon Dioxide Cycle

Numerical study on aerodynamic performance and particle erosion characteristics of flue gas turbine

Influence of Real Gas Properties on Aerodynamic Losses in a Supercritical CO2 Centrifugal Compressor

Experimental study on the effect of fluidic oscillator jet position on the performance of a high speed compressor cascade

Flow Loss Mechanism in a Supercritical Carbon Dioxide Centrifugal Compressor at Low Flow Rate Conditions

The Effect of High-Speed Steam Discharged from the Bypass Diffusers on Low-Pressure Turbine Blades

Flow resistance analysis of non-isothermal supercritical CO2