Abstract:At present, the most prominent technical problems of small and medium capacity expanders are low internal efficiency and small expansion ratio. In order to promote the practical application of small and medium capacity Organic Rankine Cycle (ORC) system, improving the thermodynamic performance of the expander was a remarkable issue, and the systematic research on the irreversibility of expander's working process is the fundamental work to achieve this goal. Summarizing the related research on various small capacity volumetric expanders, the research on flow problem is lacked. For an atypical volumetric expander, the flow mechanism of single screw expanders (SSEs) is more complex. In this paper, we discussed the effect of the pressure loss in the inlet and exhaust passages on the performance of SSEs. We selected two SSE prototypes developed by our laboratory to carry out the experiment under variable working conditions. The internal volume ratios are 2.95 and 3.98 respectively. The pressure differences of inlet and exhaust passages were measured. In order to evaluate the effect of the flow losses on the performance, we defined two indexes: pressure loss rate (PLR) and pressure energy loss influence rate of shaft efficiency (PELRe). From the results, the pressure losses of inlet and exhaust passages for each SSE increase gradually, PLRin increases slightly and PLRout increases gradually. At the maximum point of shaft efficiency, the losses of the SSE with 2.95 are 28.06 kPa and 46.09 kPa, and the values of the SSE with 3.98 are 37.58 kPa and 33.79 kPa, respectively. It shows that the pressure losses are relatively high. The maximum values of internal and external expansion ratio for the SSE with 2.95 are 4.8 and 6 respectively, and the values of the SSE with 3.98 are 5.7 and 7 respectively. For ideal volume expansion, the internal expansion ratio of two prototypes should be 4.55 and 6.9, respectively. Summarizing the above results, how to enhance the pressure drop effect of leakage and reduce the flow resistance loss of inlet and exhaust passages simultaneously is an important technical premise to improve the expansion ratio by structural optimization. Meanwhile, PELRe of two prototypes are 16.01% and 13.59% respectively at the point. It shows that the flow losses of inlet and exhaust passages could significantly influence the performance of SSEs.

Flow loss mechanisms investigation on a novel corotating scroll expander for supercritical carbon dioxide power system

Experimental and Numerical Investigation on the Dynamic Characteristics of a Lab-Scale Transcritical CO2 Loop

CFD Simulation of a Supercritical CO2 Rolling Rotor Expander for Waste Heat Recovery System of Engines

Unsteady Leakage Flow Through Axial Clearance of an ORC Scroll Expander

Study of A Rotary Vane Expander for the Transcritical Co2 Cycle-Part I: Experimental Investigation

Experimental Investigation of a Scroll Expander for Power Generation Part of a Resorption Cogeneration

Research on the performance characteristics of an oil-free scroll expander that is applied to a micro-scale compressed air energy storage system

Simulation of Scroll Expander Used in Low-Temperature Waste Heat Recovery System

Experimental study on the influence of inlet and exhaust pressure loss on the performance of single screw expanders

Flow loss mechanism of a novel co-rotating scroll hydrogen recirculation pump for fuel cell systems

Flow Characteristics Analysis of Main Flow Channel and Clearance of a Supercritical CO2 Turbine

Flow Analysis of an Operational Natural Gas Turbo Expander

Influence of Real Gas Properties on Loss in a Super Critical CO2 (sco2) Centrifugal Compressor

Study of a Rotary Vane Expander for the Transcritical CO 2 Cycle—Part II: Theoretical Modeling

Flow Loss Mechanism in a Supercritical Carbon Dioxide Centrifugal Compressor at Low Flow Rate Conditions

Vortex Patterns Investigation and Enstrophy Analysis in a Small Scale S-CO2 Axial Turbine

Flow resistance analysis of non-isothermal supercritical CO2

Numerical Investigation of Flow Characteristics in a Supercritical Carbon Dioxide Turbine for 20 Megawatt Brayton Cycle

Evaluate the validity of the empirical correlations of clearance and friction coefficients to improve a scroll expander semi-empirical model

The Influence of Flow Passage Geometry on the Performances of a Supercritical CO2 Centrifugal Compressor

Design and Performance Analysis of a Supercritical CO2 Centrifugal Compressor With Variable Geometry