Abstract:Cr(VI) as a toxic heavy metal can endanger human physical and mental health. The adsorption method has been widely used for Cr(VI) removal due to its advantages of cost-effectiveness and simplicity of operation. However, the key to Cr(VI) removal by adsorption lies in the construction of adsorption active sites. In this study, Fe 3 O 4 @COF-MT@PPy magnetic composites were prepared by the Schiff base method and in situ polymerisation to construct adsorbents with high specific surface area and abundant amino active sites for the removal of Cr(VI) from wastewater. The TEM and BET results showed that PPy was successfully encapsulated on the Fe 3 O 4 @COF-MT material, and the COF layer provided sites for the polymerisation of PPy, which resulted in a large specific surface area (400.93 m 2 /g) for Fe 3 O 4 @COF-MT@PPy, thus providing more adsorption sites. The VSM results showed that the prepared composites have good magnetic properties (13.8 emu/g) and are easy to separate from aqueous solutions. Encouragingly, the Fe 3 O 4 @COF-MT@PPy composites showed excellent adsorption performance for Cr(VI) in aqueous solution. The maximum adsorption capacity of the material for Cr(VI) was 429.18 mg/g at 298 K, which was much higher than Fe 3 O 4 @COF-MT with Fe 3 O 4 @PPy. Adsorption kinetics and isotherm analyses showed that the adsorption process was more in line with the pseudo-second-order and Langmuir models. The Fe 3 O 4 @COF-MT@PPy composites were able to maintain high adsorption capacity of Cr(VI) after five regenerations, which showed good reusability. In addition, interfering ion experiments demonstrated the selective adsorption of Fe 3 O 4 @COF-MT@PPy on Cr(VI). Using XPS for the analysis, it can be speculated that the adsorption mechanism is due to the abundant amino groups on the surface of the adsorbent firstly exerting electrostatic attraction and ion-exchange effect on the anion Cr(VI), and then the protonated amino groups reduce part of the Cr(VI) to Cr(III), and finally adsorb the Cr(III) on the surface of the material by chelation. Therefore, the recyclable Fe 3 O 4 @COF-MT@PPy has a good potential for adsorption of Cr-containing wastewater.

Magnetic Core@Shell Fe<sub>3</sub>O<sub>4</sub>@Polypyrrole@Sodium Dodecyl Sulfate Composite for Enhanced Selective Removal of Dyestuffs and Heavy Metal Ions from Complex Wastewater

Magnetic Core@Shell Fe 3 O 4 @Polypyrrole@Sodium Dodecyl Sulfate Composite for Enhanced Selective Removal of Dyestuffs and Heavy Metal Ions from Complex Wastewater

Fabrication of core–shell Fe 3 O 4 @polypyrrole@sodium dodecyl benzene sulfonate composite for high-performance adsorption of methylene blue and malachite green in water

Fabrication of Monodisperse Magnetic Polystyrene Mesoporous Composite Microspheres for High-Efficiency Selective Adsorption and Rapid Separation of Cationic Dyes in Textile Industry Wastewater

Core-shelled Mesoporous CoFe2O4–SiO2 Material with Good Adsorption and High-Temperature Magnetic Recycling Capabilities

Sulfonic Acid-Modified Polyacrylamide Magnetic Composite with Wide Ph Applicability for Efficient Removal of Cationic Dyes

Selective and Efficient Adsorption of Anionic Dyes by Core/shell Magnetic MWCNTs Nano-Hybrid Constructed Through Facial Polydopamine Tailored Graft Polymerization: Insight of Adsorption Mechanism, Kinetic, Isotherm and Thermodynamic Study

A Magnetically Recyclable Chitosan Composite Adsorbent Functionalized with EDTA for Simultaneous Capture of Anionic Dye and Heavy Metals in Complex Wastewater

Core@double-shell Structured Magnetic Halloysite Nanotube Nano-Hybrid As Efficient Recyclable Adsorbent for Methylene Blue Removal

Super-efficient removal and adsorption mechanism of anionic dyes from water by magnetic amino acid-functionalized diatomite/yttrium alginate hybrid beads as an eco-friendly composite

In Situ Synthesis of Magnetic Poly(DMAEAB-co-NIPAm)@Fe3O4 Composite Hydrogel for Removal of Dye from Water

Magnetic Fe3O4/MnO2 Core–shell Nano-Composite for Removal of Heavy Metals from Wastewater

Novel cationic polymer modified magnetic chitosan beads for efficient adsorption of heavy metals and dyes over a wide pH range

Magnetic double-core@shell MnO2@NiFe@DE as a multifunctional scavenger for efficient removal of tetracycline, anionic and cationic dyes

Effective adsorption and removal of Cr(VI) from wastewater using magnetic composites prepared by synergistic effect of polypyrrole and covalent organic frameworks

Novel Magnetic Polysaccharide/graphene Oxide @fe3o4 Gel Beads for Adsorbing Heavy Metal Ions.

Recyclable hydrolyzed polymers of intrinsic microporosity-1/Fe3O4 magnetic composites as adsorbents for selective cationic dye adsorption

Design and Synthesis of Core–shell Fe3O4@PTMT Composite Magnetic Microspheres for Adsorption of Heavy Metals from High Salinity Wastewater

Magnetite@poly(p-phenylenediamine) core–shell composite modified with salicylaldehyde for adsorption and separation of Mn (VII) from polluted water

Cu2MoS4-based magnetic composites as effective adsorbent and photocatalyst for removal of organic contaminants in water

Porous polymer magnetic adsorbents for dye wastewater treatment