Abstract:Abstract Uncontrollable dendrite growth resulting from the non-uniform lithium ion (Li + ) flux and volume expansion in lithium metal (Li) negative electrode leads to rapid performance degradation and serious safety problems of lithium metal batteries. Although N-containing functional groups in carbon materials are reported to be effective to homogenize the Li + flux, the effective interaction distance between lithium ions and N-containing groups should be relatively small (down to nanometer scale) according to the Debye length law. Thus, it is necessary to carefully design the microstructure of N-containing carbon materials to make the most of their roles in regulating the Li + flux. In this work, porous carbon nitride microspheres (PCNMs) with abundant nanopores have been synthesized and utilized to fabricate a uniform lithiophilic coating layer having hybrid pores of both the nano- and micrometer scales on the Cu/Li foil. Physically, the three-dimensional (3D) porous framework is favorable for absorbing volume changes and guiding Li growth. Chemically, this coating layer can render a suitable interaction distance to effectively homogenize the Li + flux and contribute to establishing a robust and stable solid electrolyte interphase (SEI) layer with Li-F, Li-N, and Li-O-rich contents based on the Debye length law. Such a physical-chemical synergic regulation strategy using PCNMs can lead to dendrite-free Li plating, resulting in a low nucleation overpotential and stable Li plating/stripping cycling performance in both the Li‖Cu and the Li‖Li symmetric cells. Meanwhile, a full cell using the PCNM coated Li foil negative electrode and a LiFePO 4 positive electrode has delivered a high capacity retention of ∼ 80% after more than 200 cycles at 1 C and achieved a remarkable rate capability. The pouch cell fabricated by pairing the PCNM coated Li foil negative electrode with a NCM 811 positive electrode has retained ∼ 73% of the initial capacity after 150 cycles at 0.2 C.

Uniform Lithium Plating for Dendrite-Free Lithium Metal Batteries: Role of Dipolar Channels in Poly(vinylidene Fluoride) and PbZrxTi1-xO3 Interface.

Uniform Lithium Plating for Dendrite-Free Lithium Metal Batteries: Role of Dipolar Channels in Poly(vinylidene fluoride) and PbZr x Ti 1- x O 3 Interface

Poly (vinylidene Fluoride) Binder Reinforced Poly (propylene Carbonate)/3d Garnet Nanofiber Composite Polymer Electrolyte Toward Dendrite-Free Lithium Metal Batteries

Ion-regulating Hybrid Electrolyte Interface for Long-life and Low N/P Ratio Lithium Metal Batteries

Bipolar Polymeric Protective Layer for Dendrite‐Free and Corrosion‐Resistant Lithium Metal Anode in Ethylene Carbonate Electrolyte

Nano-channel-based physical and chemical synergic regulation for dendrite-free lithium plating

Dual-Layered 3D Composite Skeleton Enables Spatially Ordered Lithium Plating/Stripping for Lithium Metal Batteries with Ultra-Low N/P Ratios

Construction of Polyvinylidene Fluoride Buffer Layers for Li1.3Al0.3Ti1.7(PO4)(3) Solid-State Electrolytes toward Stable Dendrite-Free Lithium Metal Batteries

Composite Polymer Electrolytes with Ionic Liquid Grafted-Laponite for Dendrite-Free All-Solid-state Lithium Metal Batteries

Garnet-doped Composite Polymer Electrolyte with High Ionic Conductivity for Dendrite-Free Lithium Batteries

Integrating high ionic conductive PDOL solid/gel composite electrolyte for enhancement of interface combination and lithium dentrite inhibition of solid-state lithium battery

Design of Robust, Lithiophilic, and Flexible Inorganic‐Polymer Protective Layer by Separator Engineering Enables Dendrite‐Free Lithium Metal Batteries with LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathode

Rational Design of Hierarchical “Ceramic‐in‐Polymer” and “Polymer‐in‐Ceramic” Electrolytes for Dendrite‐Free Solid‐State Batteries

Composite polymer electrolyte with ionic liquid grafted-Laponite for dendrite-free all-solid-state lithium metal batteries

Microporous Metal–Organic Framework (MOF)-Based Composite Polymer Electrolyte (CPE) Mitigating Lithium Dendrite Formation in All-Solid-State-Lithium Batteries

Functional lithiophilic polymer modified separator for dendrite-free and pulverization-free lithium metal batteries

Construction of a Dense and Li-N Rich Solid Electrolyte Interface for Dendrite-Free Lithium Metal Batteries

An Intelligent “solid–liquid” Hybrid Electrolyte for High-Voltage and Dendrite-Free Lithium Metal Batteries

Porous Polymer Membrane with Uniform Lithium-Ion Transport Via Phase Separation for Stable Lithium Metal Batteries

Ameliorating the interfacial issues of all-solid-state lithium metal batteries by constructing polymer/inorganic composite electrolyte

Dendrite‐Free Lithium Metal Batteries Enabled by Coordination Chemistry in Polymer‐Ceramic Modified Separators